Changes since CMSSW_12_1_0_pre1:
CMSSW_12_1_0_pre1...CMSSW_12_1_0_pre2
- #35001 from @gartung: Utilities/StaticAnalyzers: Update function dumper to not add virtual at the end of function calls
core
- #34999 from @Dr15Jones: Use sufficient digits when converting a double
core
- #34998 from @bsunanda: Run3-hcx313 Rearrange the .h files in SimCalorimetry/HcalZeroSuppressionProducers
simulation
- #34996 from @makortel: Migrate classes deriving from IsoDepositExtractor to esConsumes()
reconstruction
- #34992 from @missirol: Fixing some edge cases in HLT-Patatrack customisations
hlt
- #34984 from @Dr15Jones: Fix infrequent deadlock in edm::ThreadHandoff
simulation
- #34983 from @bsunanda: Run3-gex90 Make unique material names as default for all Run3 scenarios
geometry
upgrade
- #34982 from @Dr15Jones: Avoid memory overwrites in Ecal PayloadInspectors
db
- #34980 from @bsunanda: Run3-alca198 Modify the analyzers to record muons not on event basis but on single muon basis
alca
- #34977 from @smuzaffar: [Framework] Move publically used private headers in to interface dir
core
- #34976 from @Purva-Chaudhari: Remove boost lexical_cast dependency in FWCore
core
- #34974 from @cvuosalo: [DD4hep] Revise order of materials to prevent delayed resolution of references
geometry
- #34973 from @jeongeun: Migrate module configuration in PhysicsTools to use default cfipython
reconstruction
- #34972 from @bsunanda: Run3-hcx310 Put back HcalDigiProducer.cc in SimCalorimetry/HcalSimProducers/src
simulation
- #34969 from @makortel: Migrate TrackingParticleNumberOfLayersProducer to esConsumes()
simulation
- #34968 from @makortel: Restore cms::cuda::ESProduct construction without GPU
heterogeneous
- #34967 from @makortel: Migrate some modules in SimTracker to esConsumes()
simulation
- #34965 from @bsunanda: Run3-alca197 Add a possible AlCa stream for IsoTrackFilter useful for MC productions
alca
operations
- #34964 from @bsunanda: Run3-sim103 Add tools to study big xml file which goes in the DB
dqm
geometry
simulation
- #34963 from @abhih1: Migrate leftover ECAL DQM codes to ESConsumes
dqm
- #34962 from @slava77: initialize TrackstersProducer::iterIndex_ to 0
reconstruction
upgrade
- #34961 from @makortel: Migrate some modules in RecoHI to esConsumes()
reconstruction
- #34960 from @osschar: [Fireworks/Geometry] Strip topolgy for sub-classes of StripTopology was not exported to RECO geometry.
visualization
- #34959 from @makortel: Migrate some modules in RecoJets to esConsumes()
reconstruction
- #34958 from @makortel: Add public interface for constructing and freeing caching allocators
heterogeneous
- #34956 from @fwyzard: HLT customisation for Patatrack pixel tracks and GPU offload
hlt
- #34954 from @lecriste: [HGCAL] Improve validation scripts
dqm
- #34953 from @abhih1: Correct labels for a Trigger plot in ECAL DQM
dqm
- #34951 from @mtosi: fix typo in the gen fragment file name
generators
- #34948 from @fwyzard: Fix uploading the EventSetup conditions to multiple CUDA devices
heterogeneous
- #34945 from @makortel: Migrate RPCRecHitProducer to esConsumes()
reconstruction
- #34944 from @makortel: Remove MuonToSimAssociatorBase, MuonToSimAssociatorByHits, and TrackAssociatorRecord as obsolete
analysis
alca
dqm
reconstruction
simulation
- #34943 from @makortel: Migrate some modules in RecoMET to esConsumes()
reconstruction
- #34941 from @Dr15Jones: Better reporting of CPU timing
core
- #34940 from @bsunanda: Run3-hcx309 Rearrange the files to remove .h files from SimCalorimetry/HcalSimProducers/src
simulation
- #34939 from @bsunanda: Run3-hcx308 Rearrange the files to remove .h files from SimCalorimetry/CastorSim/src
simulation
- #34938 from @makortel: Migrate PFSimParticleProducer to esConsumes()
reconstruction
- #34935 from @makortel: Migrate PFTauPrimaryVertexProducerBase to esConsumes()
reconstruction
- #34934 from @makortel: Migrate some modules in RecoTracker to esConsumes()
reconstruction
- #34931 from @pieterdavid: Update pileupCal.py using numpy
db
- #34929 from @fwyzard: Fix radix sort test
heterogeneous
- #34928 from @bsunanda: Run3-sim102 Correct the cfg's so that they can work
simulation
- #34927 from @bsunanda: Run3-gex89 Attempt to define unqiue names of materials everywhere
geometry
upgrade
- #34926 from @Dr15Jones: Simplify setting EDPutTokenT via call to produces
core
- #34924 from @makortel: Migrate (Cosmic)ParametersDefinerForTP to esConsumes()
dqm
simulation
- #34922 from @tvami: Add HCAL tag
HcalRespCorrs_2021_v3.0_mc
to Run-3 MC GTsalca
- #34921 from @trackreco: Update of mkFit for 12_1_0_pre2
operations
reconstruction
- #34919 from @smuzaffar: [Reco] Fixes needed to avoid exposing private headers via interface dir
reconstruction
- #34916 from @Dr15Jones: Move Guid.h to interface
core
- #34915 from @Dr15Jones: Created setupSiteLocalConfig
core
- #34914 from @Dr15Jones: Consolidated GLBMuonAnalyzer into one file
reconstruction
- #34913 from @smuzaffar: [PhysicsTools] Move icc file used by public interface in to interface
analysis
- #34912 from @smorovic: (DAQ) input source - minimum starting lumisection
daq
reconstruction
- #34911 from @smuzaffar: [HLTriggerOffline] Move Higgs sources in to plugins dir
dqm
- #34910 from @makortel: Complete migration of TrackClassifier to esConsumes()
simulation
- #34909 from @apsallid: [HGCAL] make makeHGCalValidationPlots.py executable again
dqm
- #34908 from @bainbrid: LowPtElectrons: convert Seed BDTs from XML to ROOT file format
reconstruction
- #34907 from @smuzaffar: [Geometry] Move public headers in to interface dir
geometry
- #34905 from @smuzaffar: [Validation] Use correct header for ParametersDefinerForTP
dqm
- #34904 from @smuzaffar: [Validation] Move EcalDigis sources in to plugins dir
dqm
- #34903 from @smuzaffar: [GCC10] Use constexpr which fixes gcc10/ASAN build error
alca
- #34900 from @mmusich: Do not produce NaNs in
SiPixelActionExecutor
dqm
- #34899 from @Dr15Jones: Run G4 workers on their own dedicated threads
simulation
- #34897 from @smuzaffar: [Calib] Move private header in to src directory
alca
- #34896 from @smuzaffar: [Fireworks] Move public headers in to interface directory
visualization
- #34894 from @smuzaffar: [Generator] Move public headers in to interface directory
generators
- #34893 from @smuzaffar: [CommonTools] Move public headers in to interface directory
dqm
reconstruction
- #34892 from @tvami: Fix typo in the RelMon category
dqm
- #34891 from @Dr15Jones: Moved headers from src to interface in FWCore/Framework
core
- #34887 from @yuanchao: Remove unused headers for CommonTools packages
reconstruction
- #34886 from @smuzaffar: BuildFile: use py3-sqlalchemy
db
- #34885 from @mmusich: migrate
AlignmentProducer
to event consumesalca
- #34883 from @smuzaffar: Buildfile cleanup: remove non-existing module.cc file
simulation
- #34881 from @mmusich: [Alignment/HIPAlignmentAlgorithm] modernize
LhcTrackAnalyzer
alca
- #34879 from @bsunanda: Run3-gex88 Make P5 as the default for 2021 scenarios
geometry
upgrade
- #34876 from @mmusich: [Tracker Alignment] Miscellaneous fixes in
Alignment/OfflineValidation
all-in-one toolalca
- #34875 from @kpedro88: more Python3 fixes for geometry script
geometry
upgrade
- #34874 from @smuzaffar: [DBG] Fixes needed for 08-12-2300 DBG IB
alca
simulation
- #34872 from @smuzaffar: [IOMC] Move public headers to interface directory
core
daq
fastsim
simulation
- #34871 from @smuzaffar: [Validation] Removed unnecessary include statements
dqm
- #34870 from @smuzaffar: [TkTrackingRegions] Move public headers to interface directory
reconstruction
- #34869 from @iarspider: Add missing include in CondDBTools.cc
db
- #34868 from @smuzaffar: [RecoTracker] Move public headers to interface directory
dqm
reconstruction
- #34867 from @smuzaffar: [RecoPixelVertexing] Move public headers to interface directory
reconstruction
- #34866 from @smuzaffar: [Reco] Removed unnecessary include statements
alca
reconstruction
db
upgrade
- #34865 from @smuzaffar: [Reco] Removed unnecessary include statements
hlt
reconstruction
- #34864 from @smuzaffar: [RecoMuon] Remove unnecessary include statements to avoid private hdr deps
reconstruction
- #34863 from @smuzaffar: [L1TTrackMatch] Remove unnecessary include statements to avoid private hdr dep
l1
upgrade
- #34862 from @smuzaffar: [DQM] Remove unnecessary include statements to avoid private header dep
dqm
- #34858 from @slava77: initialize Trackster::iterationIndex_
reconstruction
upgrade
- #34857 from @bsunanda: Run3-sim101 Modified the examination of geometry in XML and DB
simulation
- #34856 from @bsunanda: Run3-gex87 Modify material budget code relevant to study XML vs DB
dqm
geometry
- #34855 from @smuzaffar: Coderule script: fixes needed for python3
core
- #34853 from @smuzaffar: [CalibMuon] Move and merge .h and .cc files used by plugin
alca
reconstruction
- #34852 from @iarspider: [GCC11] Fix warning: loop variable binds to a temporary
reconstruction
- #34849 from @smuzaffar: [SimCalorimetry] Avoid using private CondFormats/EcalObjects/src/classes.h
simulation
- #34848 from @ggovi: o2o tools fixes and improvements for python3
db
- #34847 from @ggovi: CondCore/Utilities: cleaned up dependencies from CondCore/CondDB details
db
- #34846 from @OzAmram: Fix rare crash in pixel template interpolation
reconstruction
db
- #34844 from @CTPPS: PPS Alignment - bug fix
alca
db
- #34843 from @jshlee: GEM unpacker cleanup
reconstruction
simulation
upgrade
- #34842 from @bsunanda: Run3-sim100 Take Vladimir's comments for include statements of CLHEP headers
simulation
upgrade
- #34837 from @Dr15Jones: Performance improvements for DQM startup
core
dqm
- #34836 from @bsunanda: Run3-sim99 Collapse .h and .cc files in SimG4CMS/EcalTestBeam
simulation
- #34834 from @jeongeun: Migrate module configuration in RecoTauTag to use default cfipython
reconstruction
- #34833 from @perrotta: Remove dead assignments for ZToMuMuGammaAnalyzer and HGCalSimHitValidation
dqm
- #34832 from @mmusich: [RFC] add
commissioning_run
as DQM runType and use it in SiStrip online DQM clientdqm
- #34830 from @bsunanda: Run3-sim98 Collapse .h and .cc files in SimG4CMS/FP420
simulation
- #34829 from @bsunanda: Run3-alca196 Collapse .h and .cc files in DQMOffline/CalibCalo and reorganize the files
dqm
- #34828 from @mteroerd: Validation plots for APE and bug fixes
alca
- #34827 from @maaraujo94: Adding an HLT filter based on PPS local track multiplicity conditions for selection of events for PPS PCL
hlt
- #34826 from @smuzaffar: Replace boost::regex with std::regex
db
- #34825 from @iarspider: [GCC11] Add missing #include for std::size_t definition
heterogeneous
- #34824 from @iarspider: [GCC11] Fix "this pointer is null" in class FWRecoGeometryESProducer of Fireworks/Geometry
visualization
- #34823 from @bsunanda: Run3-alca192B Change std::cout to edm::LogVerbatim in a number of classes in Calibration/IsolatedParticles
alca
- #34821 from @yeckang: GEM Validation update
dqm
simulation
- #34820 from @civanch: OscarMTProducer clean-up
simulation
- #34819 from @bsunanda: Run3-sim97 Rearrange the files in SimG4CMS/ShowerLibraryProducer and collapse .h and .cc files
simulation
- #34818 from @jeongeun: Migrate module configuration in RecoVertex to use default cfipython
reconstruction
- #34817 from @jeongeun: Migrate module configuration in RecoPixelVertexing to use default cfipython
reconstruction
- #34816 from @bsunanda: Run3-sim96 Rearrange the files in SimG4CMS/Forward and collaspse some of the .h and .cc files
simulation
- #34815 from @Dr15Jones: Better handling of timeout in FWCore/SharedMemory
core
- #34814 from @bsunanda: Run3-Sim95 Collapse .h and .cc files if possible in SimG4CMS/Calo
simulation
- #34813 from @bsunanda: Run3-alca192A Utilize edm::LogVerbatim instead of cout in a number of classes of Calibration/IsolatedParticles
alca
- #34809 from @guitargeek: Clean unused dependencies from BuildFiles
l1
analysis
alca
dqm
reconstruction
simulation
pdmv
upgrade
- #34808 from @hyunyong: [BUGFIX] CocoaModel/src/Model.cc gcc11 compile error fix (issues #34756)
alca
- #34804 from @colizz: Fix the mergeLHE.py script
generators
- #34802 from @Dr15Jones: Create abstract XrdStatistics class
core
- #34800 from @lecriste: [HGCAL] From CaloParticle to SimTrackster in the Validation linking section
dqm
reconstruction
upgrade
- #34798 from @Dr15Jones: Fix loop in PFJetIDSelectionFunctor
reconstruction
- #34796 from @bsunanda: Run3-sim94 Rearranging the files in SimG4CMS/Forward
simulation
- #34794 from @perrotta: Remove dead code and apply one fix in DQM/L1TMonitor
dqm
- #34793 from @Dr15Jones: Add additional paths to customizeHLTIter0ToMkFit
reconstruction
- #34792 from @theofil: Herwig6 header files from non-interace, related to #34718
generators
- #34791 from @bsunanda: Phase2-TB63Z Rearrange the header file and make first example for dd4hep (replacing #34752)
simulation
upgrade
- #34786 from @abdoulline: HCAL: HF SimHits timing fix
geometry
simulation
- #34784 from @bsunanda: Run3-alca193 Add DQM for HcalIterativePhiSymAlCaReco
dqm
operations
- #34783 from @dildick: New option in CSC DigiToRaw to pack strip digis by CFEB in each chamber.
reconstruction
simulation
- #34776 from @bsunanda: Run3-alca192 Add a few methods in Calibration/IsolatedParticles
alca
- #34773 from @smuzaffar: [DQM] Cleanup for private header usage
dqm
- #34772 from @iarspider: [GCC 11] Fix "this pointer is null" in RecoJets/JetProducers PileupJetIdAlgo
reconstruction
- #34771 from @Dr15Jones: Make header files in FWCore/Framework/interface consistent
core
dqm
simulation
- #34770 from @bsunanda: Run3-TB63 Rearrange the files in SimG4CMS/HcalTestBeam
simulation
- #34769 from @iarspider: [GCC 11] Fix error "this pointer is null" in PhysicsTools/FWLite
analysis
- #34767 from @iarspider: [GCC 11] Fix error "this pointer is null" in L1Trigger/DTTrigger
l1
- #34765 from @thomreis: Fix crash of ECAL GPU reco when ECAL is out of the run.
reconstruction
- #34764 from @iarspider: [GCC 11] Fix error: 'this' pointer is null in Fireworks/Geometry
visualization
- #34763 from @smuzaffar: [MagneticField] Move public headers to interface directory
pdmv
reconstruction
- #34762 from @smuzaffar: [DataFormat] Cleanup unnecessary includes of DF private headers
alca
daq
db
reconstruction
- #34761 from @smuzaffar: [Calib] Move public headers to interface directory
l1
alca
reconstruction
db
- #34759 from @ChrisMisan: Diamond Sampic reco
reconstruction
- #34758 from @iarspider: [GCC 11] Fix error "this pointer is null" in DQM/SiStripCommissioningDbClients
dqm
- #34757 from @iarspider: [GCC 11] Fix error "array subscript outside array bounds"
db
- #34755 from @smuzaffar: [Geometry] Move public headers to interface directory
db
geometry
simulation
upgrade
- #34754 from @fabiocos: Modernization of several simulation standalone test EDAnalyzers
analysis
simulation
- #34748 from @fwyzard: Protect HCAL GPU-related modules against empty events
reconstruction
- #34746 from @smuzaffar: [L1] Move public headers to interface directory
dqm
l1
- #34745 from @smuzaffar: [RecoParticleFlow] Cleanup for unused/private header
reconstruction
- #34744 from @smuzaffar: [TrackingTools] Move public headers to interface directory
reconstruction
- #34740 from @cms-tsg-storm: HLT menu migration to CMSSW 12_0_0_pre5 template [12_1_X]
hlt
- #34739 from @smuzaffar: [EventFilter] header cleanup to avoid private header usage
dqm
hlt
- #34738 from @bsunanda: Run3-hcx306 Bug fix to get back the same hit energy distribution for HCAL
simulation
- #34737 from @bsunanda: Run3-alca191 Stop using cout in the codes of Calibration/HcalCalibAlgos
alca
- #34735 from @Dr15Jones: Rewrote checkForModuleDependencyCorrectness
core
- #34734 from @smuzaffar: [Sim] Move public headers on to interface directory
dqm
generators
simulation
upgrade
- #34733 from @smuzaffar: [DD] Move public headers in to interface directory
geometry
simulation
- #34729 from @smuzaffar: [CommonTools] move public header to interface directory
analysis
dqm
reconstruction
visualization
- #34728 from @Dres90: Fix params for Payload Inspector
db
- #34727 from @smuzaffar: [Firework] Cleanup for public headers
visualization
- #34725 from @fwyzard: Fix uploading EventSetup conditions from multiple CUDA streams
heterogeneous
- #34723 from @yuanchao: Remove unused headers of Calib- packages
alca
- #34722 from @srimanob: Allow multiple "--command" in runTheMatrix
pdmv
upgrade
- #34720 from @dmeuser: TkDQM: Fill barycenter plots at EndRun
dqm
- #34719 from @francescobrivio: Update DQM onlinebeammonitor
dqm
- #34715 from @yuanchao: Remove unused header for Alignment/LaserAlignment and Alignment/MuonAlignmentAlgorithms
alca
- #34713 from @jshlee: GEM dataformat - fix classversion
reconstruction
simulation
upgrade
- #34710 from @colizz: Enable concurrent GEN in Configuration/Generator/python
generators
pdmv
upgrade
- #34709 from @bsunanda: Run3-alca190 Modify the AlCaRecoProducer for HBHEMuon
alca
- #34708 from @dan131riley: minimal Validation/RecoTrack/python/plotting/plotting.py fix for division changes in py3
dqm
- #34706 from @zuoxunwu: Online DQM: Add EMTF DQM plots on GEM information and their comparison to CSC inputs
dqm
- #34703 from @smuzaffar: [tidy] Performance-unnecessary-copy-initialization fix
reconstruction
- #34702 from @apsallid: [HGCAL] Updates on the RelVal campaign scripts due to python3 and other PRs
dqm
- #34699 from @mmusich: [Payload Inspector] Miscellaneous improvements for
RunInfo
andSiStripLatency
db
- #34697 from @Dr15Jones: Apply task chains to more code in FWCore/Framework
core
- #34695 from @mariadalfonso: NANO: rework for Prompt (part2)
xpog
- #34691 from @smuzaffar: [Misc2][clang-tidy] make deleted function public
alca
core
db
dqm
generators
geometry
l1
reconstruction
simulation
- #34690 from @mmusich: make
TrackerSystematicMisalignments
a one modulealca
- #34688 from @smuzaffar: [L1][clang-tidy] make deleted function public
l1
- #34683 from @smuzaffar: [Sim][clang-tidy] make deleted function public
generators
simulation
upgrade
- #34682 from @smuzaffar: [Cond][clang-tidy] make deleted function public
alca
db
l1
- #34681 from @dr-stringfellow: Disable vertex smearing for workflows using CloseByParticleGun
operations
pdmv
simulation
upgrade
- #34676 from @ptcox: Update test configs for CSCDigitizer to 12_0_X
simulation
- #34674 from @bsunanda: Run3-hcx305 Update some of the cfg's in Validation/HcalHits in view of changes to SD classes
dqm
- #34672 from @ggovi: Payload inspector framework moved to pybind11
db
- #34670 from @smuzaffar: [OnlineDB][clang-tidy] make deleted function public
db
- #34668 from @smuzaffar: [DataFormats][clang-tidy] make deleted function public
core
reconstruction
simulation
upgrade
- #34665 from @smuzaffar: [Fireworks][Clang-tidy] make deleted function public
visualization
- #34664 from @stahlleiton: Adapted EcalRawToDigi and SiPixelRawToCluster GPU code for HIon
heterogeneous
reconstruction
- #34657 from @smuzaffar: [CondFormat][clang-tidy] Fix readability-container-size-empty warnings
alca
db
- #34643 from @bbilin: Changing Commissioning 2020 to Commissioning 2021 with new run # and dataset.
pdmv
upgrade
- #34631 from @ptcox: fix incomplete esconsumes migration
simulation
- #34612 from @namapane: Update DT DQM, calibration scripts, and local reco code to allow using "new" DB format
alca
dqm
hlt
reconstruction
db
- #34608 from @PFCal-dev: [HGCal trigger] Remove deprecated v8 geometry code + Add new trigger geometry class
l1
simulation
upgrade
- #34606 from @veszpv: Pixel cluster repair by morphing
operations
reconstruction
- #34605 from @kyoon-mit: Configure HFNose TICL Trackster Parameters
reconstruction
upgrade
- #34599 from @tklijnsma: finecalo: No longer count reentries into the calorimeter as boundary crossings
simulation
upgrade
- #34597 from @tklijnsma: Fixed finecalo performance
simulation
upgrade
- #34576 from @cms-tau-pog: Enable boosted tau reco to run at miniAOD
reconstruction
- #34572 from @mseidel42: Allow HcalPulseContainment timePhase definition as in SIM
alca
l1
reconstruction
- #34571 from @jeongeun: Migrate module configuration in RecoMET to use default cfipython
reconstruction
- #34505 from @UniMiBAnalyses: Adding the codes for ECAL Phase2 amplitude local reconstruction
reconstruction
- #34452 from @srimanob: Fix when neither "data" nor "MC" is specified in the cmsDriver.
dqm
operations
xpog
- #34446 from @AdrianoDee: Adding LUT approach for PackedCandidates
reconstruction
- #34439 from @SohamBhattacharya: Clean/rename FromMultiCl HGCal egamma collections
dqm
reconstruction
upgrade
- #34427 from @jfernan2: python2 cleanup: Validation packages
core
dqm
geometry
CMSDIST Changes between Tags REL/CMSSW_12_1_0_pre1/slc7_amd64_gcc900 and REL/CMSSW_12_1_0_pre2/slc7_amd64_gcc900:
cms-sw/cmsdist@REL/CMSSW_12_1_0_pre1/slc7_amd64_gcc900...REL/CMSSW_12_1_0_pre2/slc7_amd64_gcc900
- cms-sw/cmsdist#7240 from @cms-sw: [WIP] Remove py3-google-common package
- cms-sw/cmsdist#7239 from @cms-sw: Revert "[Tensorflow] Update to version 2.6.0"
- cms-sw/cmsdist#7237 from @ddaina: update crab-dev to v3.210825
- cms-sw/cmsdist#7234 from @cms-sw: treat private header usage as warning for devel IBs
- cms-sw/cmsdist#7232 from @cms-sw: Update py3-notebook to 6.4.3
- cms-sw/cmsdist#7231 from @cms-sw: added suport to build indiviual toolfiles
- cms-sw/cmsdist#7230 from @cms-sw: [BuildRules] Check for private headers usage
- cms-sw/cmsdist#7229 from @cms-sw: Update tag for RecoTracker-MkFit to V00-03-00
- cms-sw/cmsdist#7228 from @mrodozov: Updated root to tip of branch v6-22-00-patches
- cms-sw/cmsdist#7225 from @cms-sw: [Tensorflow] Update to version 2.6.0
- cms-sw/cmsdist#7223 from @cms-sw: [Eigen] More Eigen GPU work, with fix for CUDA 11.4
- cms-sw/cmsdist#7222 from @cms-sw: [SCRAM] use system python3 when project env is not set
- cms-sw/cmsdist#7220 from @cms-sw: Update tag for RecoEgamma-ElectronIdentification to V01-07-00
- cms-sw/cmsdist#7217 from @mmasciov: Update mkfit to V3.1.1
- cms-sw/cmsdist#7209 from @cms-sw: keep cmssw tools to drop in a common file
- cms-sw/cmsdist#7208 from @cms-sw: [cx-ORacle] enable it for non-x86_64 archs
- cms-sw/cmsdist#7207 from @cms-sw: Update tag for L1Trigger-L1THGCal to V01-06-00
- cms-sw/cmsdist#7204 from @fwyzard: Update Alpaka to v0.7.0 and Cupla to v0.3.0
- cms-sw/cmsdist#7203 from @cms-sw: Update tag for DataFormats-PatCandidates to V01-01-00
- cms-sw/cmsdist#7201 from @mkirsano: fix EvtGen data path
- cms-sw/cmsdist#7199 from @cms-sw: [Eigen] Fixed CUDA warning and restored Matrix5d inversion on GPU
- cms-sw/cmsdist#7198 from @cms-sw: fix pcm_util toolfile for CXXMODULE IBs
- cms-sw/cmsdist#7196 from @cms-sw: Update cmssw-wm-tools.spec
- cms-sw/cmsdist#7195 from @fwyzard: Update Alpaka to version 0.6.1
- cms-sw/cmsdist#7190 from @cms-sw: Update py3-wheel, py3-numpy and py3-wrapt
- cms-sw/cmsdist#7188 from @cms-sw: [GCC11] Use newer ruy for TF 2.5
- cms-sw/cmsdist#7187 from @cms-sw: updated pcm_util.xml
- cms-sw/cmsdist#7186 from @cms-sw: GCC 11 Fix for onnxruntime
- cms-sw/cmsdist#7170 from @fwyzard: Update UCX libraries to v1.10.1, and link to the RDMA core libraries