npm zigbee2mqtt 1.19.0

latest releases: 1.38.0, 1.37.1, 1.37.0...
3 years ago

Notes

  • Home Assistant addon users who don't see the update and are still on 1.18.1, make sure to switch to the new repo
  • The commissioning and backup procedure has heavily been refactored. Backups of Texas Instruments Zigbee 3.0 coordinator are now stored in the zigpy/open-coordinator-backup format. The backup/restore procedure also has been improved. It's now possible to switch between Texas Instruments Zigbee 3.0 coordinator without reflashing it (e.g. CC2538 -> CC2652). WARNING: once you start a new network or restore one on this release it will not be possible to downgrade to earlier Zigbee2MQTT versions. If you already have a network on Zigbee2MQTT < 1.19.0 and you upgrade to this release, it is possible to downgrade to earlier versions of Zigbee2MQTT.

Improvements

  • #7571 Add filtered_optimistic device option (documentation)
  • #2441 Improve color sync functionality and allow to disable
  • #7455 Add skip_disable_reporting to unbind group/remove
  • #303 Fix extended pan ID not being set correctly
  • Turn on adapter LED when joining is enabled
  • #2532 Remove configureKey
  • Home Assistant: don't publish mocked values anymore replaced by unknown state in #7032
  • #2540 Added default beep values for STS-PRS-251 expose
  • #7298 Make Node.js 16 supported
  • #2550 Adds ballast config CCT5010-0001
  • #42 Add OTA for Lupus LS12128
  • #2582 Fix EcoDim ED-10011 actions
  • #2592 Improve Danfoss 014G2461 and Hive UK7004240 support
  • #2634 New features for ID LOCK 150
  • #2631 Make TS0216 turn on at volume 0 instead of 10

Fixes

  • #7571 Honour optimistic false for groups
  • #2541 Fix unknown power source for LXN59-2S7LX1.0
  • #7292 Recognise LXT56-LS27LX1.7 as 3A12S-15
  • #7290 Xiaomi SJCGQ11LM remove tamper
  • #7326 Fix device not removed from group in configuration.yaml upon device removal
  • #7330 Correct unknown powerSource for lights supporting only brightness
  • #7220 Fix color_mode missing for lights with multiple endpoints.
  • #449 Can't set Settings > Serial > adapter to null
  • #2564 Fix EcoDim ED-10011 actions
  • #7426 Fix json schema default values and examples
  • #2565 Fix fan modes for 99432
  • #2569 OSRAM CLA60 RGBW Z3 does not support startupColorTemp
  • #2552 Fix Ubisys C4 UNSUPPORTED_ATTRIBUTE on writing configure_device_setup
  • #2565 Xiaomi DJT11LM expose action angle
  • #2577 Updated reporting defaults for Develco devices
  • #7470 Fix controlling heat endpoint with occupied_heating_setpoint_heat not working
  • #2584 SG-V100-ZB does not support battery voltage reporting
  • #2603 Remove SEA801-Zigbee/SEA802-Zigbee running_state since it doesn't support it
  • #2609 Fix TS0210 vibration not reset to false
  • #2596 Remove voltage expose of SG-V100-ZB
  • #7567 Fix commandProgrammingEventNotification missing pin
  • #2626 Fix InstaRemote action exposes
  • #2463 Fix Yookee D10110 received position inverted
  • #7603 Fix outdated network address shown in frontend
  • #7603 Show network address as hex in graphviz and plantuml network map

New supported devices

This release adds support for 49 new devices:

  • 0140302 Idinio Zigbee LED foot dimmer
  • 1742030P7 Philips Hue Calla outdoor
  • 1745530P7 Philips Hue Nyro
  • 4090330P9 Philips Hue Ensis
  • 9290022943 Philips Hue white E12
  • 929002376401 Philips Hue Iris gold limited edition (generation 4)
  • 929002376701 Philips Hue Iris silver limited edition (generation 4)
  • AQSZB-110 Develco Air quality sensor
  • AV2010/21C SMaBiT Ultra-flat magnetic contact sensor
  • CCT5011-0001/MEG5011-0001 Schneider Electric Micro module switch
  • CCTFR6400 Schneider Electric Temperature/Humidity measurement with thermostat interface
  • CCTFR6700 Schneider Electric Heating thermostat
  • DSZ01 J.XUAN Door or window contact switch
  • E1836 IKEA ASKVADER on/off switch
  • EER40030 Schneider Electric Zigbee smart plug with power meter
  • EER42000 Schneider Electric Zigbee load actuator with power meter
  • EER50000 Schneider Electric Wiser H-Relay (HACT)
  • EER51000 Schneider Electric Wiser thermostat (RTS)
  • EER53000 Schneider Electric Wiser radiator thermostat (VACT)
  • F-ADT-WTR-1 SmartThings ADT water leak detector
  • FLSZB-110 Develco Flood alarm device
  • HK-ZD-CCT-A Sunricher 50W Zigbee CCT LED driver (constant current)
  • HS1MS-EF HEIMAN Smart motion sensor
  • HS1MS-M HEIMAN Smart motion sensor
  • HSC1-WD-0 ROOME Door or window contact switch
  • LED1925G6 IKEA TRADFRI LED bulb E14 470 lumen, opal, dimmable, white spectrum, color spectrum
  • LED1935C3 IKEA TRADFRI LED bulb E14 WW clear 250 lumen, dimmable
  • OPL 130 C Innr Outdoor smart pedestal light colour
  • PRZ01 J.XUAN Human body movement sensor
  • R9077 Woox RGB+CCT LED
  • RC 110 Innr Innr RC 110 Remote Control
  • ROB_200-006-0 ROBB ZigBee LED dimmer
  • RSL 110 Innr Recessed spot light
  • SM323 Samotech ZigBee retrofit dimmer 250W
  • SPZ01 J.XUAN plug
  • TS004F TuYa Wireless switch with 4 buttons
  • TS011F_plug TuYa Smart plug
  • TS0601_air_quality_sensor Tuya Air quality sensor
  • TS0601_temperature_humidity_sensor Tuya Temperature & humidity sensor
  • WDE002334 Schneider Electric Rotary dimmer
  • WRS-R02 Xiaomi Aqara wireless remote switch H1 (double rocker)
  • WSZ01 J.XUAN Wireless switch
  • ZB-SW04 eWeLink Smart light switch - 4 gang
  • ZB006-X Fantem Smart dimmer module without neutral
  • ZNCJMB14LM Xiaomi Aqara S1 smart touch panel
  • ZSS-ZK-THL Moes Smart temperature and humidity meter with display
  • ZTS-EU_2gang Moes Wall touch light switch (2 gang)
  • 4090431P9 Philips Hue Flourish white and color ambiance table light with Bluetooth
  • XDD11LM Xiaomi Aqara Opple MX960

Don't miss a new zigbee2mqtt release

NewReleases is sending notifications on new releases.