zwave-js/node-zwave-js v6.0.0 on GitHub

Logging can now be configured through driver options. However, the environment variables for logging are no longer evaluated lazily, so they now need to be set before requiring zwave-js.
The second (string) parameter of the "interview failed" event handler was removed
The type ValueMetadataBase has been renamed to ValueMetadataAny. The old type ValueMetadataAny was merged into ValueMetadataBase.
The retry strategy for sending commands to nodes has been revised. By default, a message is no longer re-transmitted when the node has acknowledged its receipt, since it is unlikely that the retransmission will change anything. The old behavior can be restored by setting the attempts.retryAfterTransmitReport driver option to true.
To compensate for the change and give the response enough time to reach the controller, the default for timeouts.response has been increased from 1600 to 10000.
The driver now distinguishes between stateful and event values. The latter are now exclusively exposed through the "value notification" event.
The deprecated nodeInterviewAttempts option was removed
The options fs and cacheDir have been renamed to storage.driver and storage.cacheDir.
Loggers are now managed on a per-driver basis. This means you can use zwave-js to talk to different controllers and have separate logs for each.
The lookupXYZ methods are no longer exposed by @zwave-js/config. Use the configManager property of your driver instance instead.

The index file was removed from the repo and is now generated on demand
Several improvements for GE dimmers and switches
Added missing config parameters to IDLock 150
Added Innovelli LZW36 and First Alert ZCOMBO-G
Added Technisat Dimmer and series switch
Added Lifeline association to Danfoss MT 2649
Added product id/type to NAS-WR01ZE
Added Inovelli LZW31 Black Series Dimmer
Added Aeotec ZW187 Recessed Door Sensor 7
Added checks for partial parameters
Added Aeotec ZWA009 aerQ Temperature and Humidity Sensor
Added Honeywell 39348/ZW4008
Added Zooz zst10-700 z-wave usb stick
Added Fibaro Smart Switch FGS-214 and FGS-224
Added Fortrezz fts05p
Added an additional product type to Aeotec Range Extender 7
Added iblinds V3
Added Zooz ZEN31 RGBW Dimmer
Added ThermoFloor Z-Temp2 thermostat
Change manufacturer Jasco Products to GE/Jasco
Changed ZDB5100 config to expand on parameter 1
Changed several ZW175 config parameters to use partial parameters
Improved configuration file for Fibaro FGS223
Renamed config param #11 in Q-Light Puck
Removed an unsupported parameter from GE 14294
Root endpoint values are no longer hidden for Philip PAN06, Aeotec ZW095 energy meter
New versions of @zwave-js/config are now automatically released every night if only config files were changed since the last release.
You can run npm update @zwave-js/config in the zwave-js install dir to pull the latest config files. For now, a driver restart is required afterwards.

Added basic support for 700-series controllers
Added a compatibility option to disable the Basic CC mapping
Added a compatibility option to treat Basic CC::Set commands as events instead of Reports
Added a compatibility option skipConfigurationInfoQuery to work around a firmware issue in Heat-It Z-TRM2fx
Added the compatibility option overrideFloatEncoding for devices that only understand a specific float encoding (Z-TRM3 and AC301)
A driver option was added to enable logging to the console, even if it is not a TTY
A driver option was added to control the filesystem access throttling
Improved the label for Level low property in BatteryCC
Unimplemented CCs may now be sent
The version of zwave-js is now exported as libVersion from the main entry point
Implemented Battery CC V3
Added support for Hail CC
ValueIDs that use a Duration instance as the value now have the metadata type "duration"
Added a workaround for devices that return an invalid response when finding the first configuration param
Added a hexColor property to the Color Switch CC
Added the properties ready and allNodesReady to the driver to read the status after the corresponding events were emitted
The node neighbor lists now get updated when a node is removed
The refreshValues method is now exposed on node instances, which allows polling all actuator and sensor values of a node. Note: Please read the warnings in the documentation!
The controller event callback types are now exported

Fixed an off-by-one error in the Binary Sensor Supported Report bitmask.
Note: If your devices are affected by this bug, re-interview them to remove corrupted values.
Expire nonces for keepS0NonceUntilNext devices until after the next nonce was received by the device
The interview is no longer aborted when a device does not respond to the Wakeup Capability query
Fixed a crash that could happen when compressing the value DB with an existing backup file.
Fixed a wrong value ID for Multilevel Switch CC targetValue
The driver no longer assumes that a sleeping node falls asleep after a certain time
The name and location of a node is no longer deleted when the node gets re-interviewed and does not support Node Naming And Location CC
The propertyKeyName of Meter CC values now contains the Meter type name
Configuration CC: empty Name and Info are now accepted as valid commands
stopInclusion/stopExclusion now always return a boolean
Successful pings now correctly change the node status
Messages from previous interview attempts are now dropped when an interview is restarted
When requesting node info fails, the interview is now aborted and restarted later instead of skipping all CC interviews
Added two missing "specific device types"
Switched the basic device type for Routing Slave and Static Controller
If a device sends multiple NonceGet requests in a row, the duplicate requests are now ignored instead of aborting the previous transaction

Test releases for PRs can now be created with a command
PRs titles are now enforced to comply with conventional commits
Config json files are now automatically formatted in VSCode and linted
While editing device config files, supporting IDEs can now use a JSON schema to help you
We've added @zwave-js-bot to help us manage the repo and to help you contribute

zwave-js/node-zwave-js v6.0.0 Release v6.0.0 on GitHub