github zeta-chain/node v12.3.0-rc

latest releases: v21.0.1, v20.0.6, v21.0.0...
pre-release8 months ago

CHANGELOG

Unreleased

  • zetaclientd start : 2 inputs required from stdin

Features

  • 1698 - bitcoin dynamic depositor fee

Docs

  • 1731 added doc for hotkey and tss key-share password prompts.

Features

*[1728] (#1728) - allow aborted transactions to be refunded by minting tokens to zEvm.

Refactor

  • 1630 added password prompts for hotkey and tss keyshare in zetaclient
    Starting zetaclient now requires two passwords to be input; one for the hotkey and another for the tss key-share.

Fixes

  • 1678 - clean cached stale block to fix evm outtx hash mismatch
  • 1690 - double watched gas prices and fix btc scheduler
  • 1687 - only use EVM supported chains for gas stability pool
  • 1692 - fix get params query for emissions module
  • 1706 - fix CLI crosschain show-out-tx-tracker
  • 1707 - fix bitcoin fee rate estimation
  • 1712 - increase EVM outtx inclusion timeout to 20 minutes
  • 1733 - remove the unnecessary 2x multiplier in the convertGasToZeta RPC
  • 1721 - zetaclient should provide bitcoin_chain_id when querying TSS address
  • 1744 - added cmd to encrypt tss keyshare file, allowing empty tss password for backward compatibility.

Tests

  • 1584 - allow to run E2E tests on any networks
  • 1753 - fix gosec errors on usage of rand package

CI

  • CI: adding pipeline to build and push docker images into dockerhub on release for ubuntu and macos.
  • Added docker-compose and make commands for launching full nodes. make mainnet-zetarpc-node make mainnet-bitcoind-node
  • 1736 - chore: add Ethermint endpoints to OpenAPI

Chores

  • 1729 - add issue templates

Version: v12.2.4

Fixes

  • 1638 - additional check to make sure external chain height always increases
  • 1672 - paying 50% more than base gas price to buffer EIP1559 gas price increase
  • 1642 - Change WhitelistERC20 authorization from group1 to group2
  • 1610 - add pending outtx hash to tracker after monitoring for 10 minutes
  • 1656 - schedule bitcoin keysign with intervals to avoid keysign failures
  • 1662 - skip Goerli BlobTxType transactions introduced in Dencun upgrade
  • 1663 - skip Mumbai empty block if ethclient sanity check fails
  • 1661 - use estimated SegWit tx size for Bitcoin gas fee calculation
  • 1667 - estimate SegWit tx size in uinit of vByte
  • 1675 - use chain param ConfirmationCount for bitcoin confirmation

Chores

  • 1694 - remove standalone network, use require testing package for the entire node folder

Version: v12.1.0

Tests

  • 1577 - add chain header tests in E2E tests and fix admin tests

Features

  • 1658 - modify emission distribution to use fixed block rewards

Fixes

  • 1535 - Avoid voting on wrong ballots due to false blockNumber in EVM tx receipt
  • 1588 - fix chain params comparison logic
  • 1650 - exempt (discounted) system txs from min gas price check and gas fee deduction
  • 1632 - set keygen to KeygenStatus_KeyGenSuccess if its in KeygenStatus_PendingKeygen.
  • 1576 - Fix zetaclient crash due to out of bound integer conversion and log prints.
  • 1575 - Skip unsupported chain parameters by IsSupported flag

CI

  • 1580 - Fix release pipelines cleanup step.

Chores

  • 1585 - Updated release instructions
  • 1615 - Add upgrade handler for version v12.1.0

Features

  • 1591 - support lower gas limit for voting on inbound and outbound transactions
  • 1592 - check inbound tracker tx hash against Tss address and some refactor on inTx observation

Refactoring

  • 1628 optimize return and simplify code
  • 1640 reorganize zetaclient into subpackages

Refactoring

  • 1619 - Add evm fee calculation to tss migration of evm chains

Version: v12.0.0

Breaking Changes

TSS and chain validation related queries have been moved from crosschain module to observer module:

  • PendingNonces :Changed from /zeta-chain/crosschain/pendingNonces/{chain_id}/{address} to /zeta-chain/observer/pendingNonces/{chain_id}/{address} . It returns all the pending nonces for a chain id and address. This returns the current pending nonces for the chain.
  • ChainNonces : Changed from /zeta-chain/crosschain/chainNonces/{chain_id} to/zeta-chain/observer/chainNonces/{chain_id} . It returns all the chain nonces for a chain id. This returns the current nonce of the TSS address for the chain.
  • ChainNoncesAll :Changed from /zeta-chain/crosschain/chainNonces to /zeta-chain/observer/chainNonces . It returns all the chain nonces for all chains. This returns the current nonce of the TSS address for all chains.

All chains now have the same observer set:

  • ObserversByChain: /zeta-chain/observer/observers_by_chain/{observation_chain} has been removed and replaced with /zeta-chain/observer/observer_set. All chains have the same observer set.
  • AllObserverMappers: /zeta-chain/observer/all_observer_mappers has been removed. /zeta-chain/observer/observer_set should be used to get observers.

Observer params and core params have been merged into chain params:

  • Params: /zeta-chain/observer/params no longer returns observer params. Observer params data have been moved to chain params described below.
  • GetCoreParams: Renamed into GetChainParams. /zeta-chain/observer/get_core_params moved to /zeta-chain/observer/get_chain_params.
  • GetCoreParamsByChain: Renamed into GetChainParamsForChain. /zeta-chain/observer/get_core_params_by_chain moved to /zeta-chain/observer/get_chain_params_by_chain.

Getting the correct TSS address for Bitcoin now requires proviidng the Bitcoin chain id:

  • GetTssAddress : Changed from /zeta-chain/observer/get_tss_address/ to /zeta-chain/observer/getTssAddress/{bitcoin_chain_id} . Optional bitcoin chain id can now be passed as a parameter to fetch the correct tss for required BTC chain. This parameter only affects the BTC tss address in the response.

Features

  • 1498 - Add monitoring(grafana, prometheus, ethbalance) for localnet testing
  • 1395 - Add state variable to track aborted zeta amount
  • 1410 - snapshots commands
  • enable zetaclients to use dynamic gas price on zetachain - enables >0 min_gas_price in feemarket module
  • add static chain data for Sepolia testnet
  • added metrics to track the burn rate of the hotkey in the telemetry server as well as prometheus

Fixes

  • 1554 - Screen out unconfirmed UTXOs that are not created by TSS itself
  • 1560 - Zetaclient post evm-chain outtx hashes only when receipt is available
  • 1516 - Unprivileged outtx tracker removal
  • 1537 - Sanity check events of ZetaSent/ZetaReceived/ZetaRevertedWithdrawn/Deposited
  • 1530 - Outbound tx confirmation/inclusion enhancement
  • 1496 - post block header for enabled EVM chains only
  • 1518 - Avoid duplicate keysign if an outTx is already pending
  • fix Code4rena issue - zetaclients potentially miss inTx when PostSend (or other RPC) fails
  • fix go-staticcheck warnings for zetaclient
  • fix Athens-3 issue - incorrect pending-tx inclusion and incorrect confirmation count
  • masked zetaclient config at startup
  • set limit for queried pending cctxs
  • add check to verify new tss has been produced when triggering tss funds migration
  • fix Athens-3 log print issue - avoid posting uncessary outtx confirmation
  • fix docker build issues with version: golang:1.20-alpine3.18
  • 1525 - relax EVM chain block header length check 1024->4096
  • 1522 - block distribution module account from receiving zeta
  • 1528 - fix panic caused on decoding malformed BTC addresses
  • 1536 - add index to check previously finalized inbounds
  • 1556 - add emptiness check for topic array in event parsing
  • 1546 - fix reset of pending nonces on genesis import
  • 1555 - Reduce websocket message limit to 10MB
  • 1567 - add bitcoin chain id to fetch the tss address rpc endpoint
  • 1501 - fix stress test - use new refactored config file and smoketest runner
  • 1589 - add bitcoin chain id to get tss address and get tss address historical cli query

Refactoring

  • 1552 - requires group2 to enable header verification
  • 1211 - use grpc and msg for query and message files
  • refactor cctx scheduler - decouple evm cctx scheduler from btc cctx scheduler
  • move tss state from crosschain to observer
  • move pending nonces, chain nonces and nonce to cctx to observer
  • move tss related cli from crosschain to observer
  • reorganize smoke tests structure
  • Add pagination to queries which iterate over large data sets InTxTrackerAll ,PendingNoncesAll ,AllBlameRecord ,TssHistory
  • GetTssAddress now returns only the current tss address for ETH and BTC
  • Add a new query GetTssAddressesByFinalizedBlockHeight to get any other tss addresses for a finalized block height
  • Move observer params into core params
  • Remove chain id from the index for observer mapper and rename it to observer set.
  • Add logger to smoke tests
  • 1521 - replace go-tss lib version with one that reverts back to thorchain tss-lib
  • 1558 - change log level for gas stability pool iteration error
  • Update --ledger flag hint

Chores

  • 1446 - renamed file zetaclientd/aux.go to zetaclientd/utils.go to avoid complaints from go package resolver.
  • 1499 - Add scripts to localnet to help test gov proposals
  • 1442 - remove build types in .goreleaser.yaml
  • 1504 - remove -race in the make install commmand
  • 1564 - bump ti-actions/changed-files

Tests

  • 1538 - improve stateful e2e testing

CI

  • Removed private runners and unused GitHub Action

Version: v11.0.0

Features

  • 1387 - Add HSM capability for zetaclient hot key
  • add a new thread to zetaclient which checks zeta supply in all connected chains in every block
  • add a new tx to update an observer, this can be either be run a tombstoned observer/validator or via admin_policy_group_2.

Fixes

  • Added check for redeployment of gas and asset token contracts
  • 1372 - Include Event Index as part for inbound tx digest
  • 1367 - fix minRelayTxFee issue and check misuse of bitcoin mainnet/testnet addresses
  • 1358 - add a new thread to zetaclient which checks zeta supply in all connected chains in every block
  • prevent deposits for paused zrc20
  • 1406 - improve log prints and speed up evm outtx inclusion
  • fix Athens-3 issue - include bitcoin outtx regardless of the cctx status

Refactoring

  • 1391 - consolidate node builds
  • update MsgUpdateContractBytecode to use code hash instead of contract address

Chores

Tests

  • Add unit tests for adding votes to a ballot

CI

Version: v10.1.2

Features

  • 1137 - external stress testing
  • 1205 - allow setting liquidity cap for ZRC20
  • 1260 - add ability to update gas limit
  • 1263 - Bitcoin block header and merkle proof
  • 1247 - add query command to get all gas stability pool balances
  • 1143 - tss funds migration capability
  • 1358 - zetaclient thread for zeta supply checks
  • 1384 - tx to update an observer

Fixes

  • 1195 - added upgrade name, and allow download. allows to test release
  • 1153 - address cosmos-gosec lint issues
  • 1128 - adding namespaces back in rpc
  • 1245 - set unique index for generate cctx
  • 1250 - remove error return in IsAuthorized
  • 1261 - Ethereum comparaison checksum/non-checksum format
  • 1264 - Blame index update
  • 1243 - feed sataoshi/B to zetacore and check actual outTx size
  • 1235 - cherry pick all hotfix from v10.0.x (zero-amount, precision, etc.)
  • 1257 - register emissions grpc server
  • 1277 - read gas limit from smart contract
  • 1252 - add CLI command to query system contract
  • 1285 - add notice when using --ledger with Ethereum HD path
  • 1283 - query outtx tracker by chain using prefixed store
  • 1280 - minor fixes to stateful upgrade
  • 1304 - remove check gasObtained == outTxGasFee
  • 1308 - begin blocker for mock mainnet

Refactoring

  • 1226 - call onCrossChainCall when depositing to a contract
  • 1238 - change default mempool version in config
  • 1279 - remove duplicate funtion name IsEthereum
  • 1289 - skip gas stability pool funding when gasLimit is equal gasUsed

Chores

  • 1193 - switch back to cosmos/cosmos-sdk
  • 1222 - changed maxNestedMsgs
  • 1265 - sync from mockmain
  • 1307 - increment handler version

Tests

  • 1135 - Stateful upgrade for smoke tests

CI

  • 1218 - cross-compile release binaries and simplify PR testings
  • 1302 - add mainnet builds to goreleaser

What's Changed

What's Changed

  • refactor: Optimize return by @fx0x55 in #1628
  • refactor: add evm amount calculation for tss migration by @kingpinXD in #1619
  • fix: outtx tracker report timeout by @ws4charlie in #1616
  • fix: modify emissions to follow fixed rewards per block by @kingpinXD in #1658
  • fix: change WhitelistERC20 authorization from group1=>group2 by @brewmaster012 in #1642
  • fix: schedule bitcoin keysign with intervals to avoid keysign failures (took hours) by @ws4charlie in #1664
  • fix: fix SegWit tx size estimation (in vByte) and gas fee calculation by @ws4charlie in #1669
  • fix: skip Goerli BlobTxType transaction and Mumbai empty block by @ws4charlie in #1665
  • fix: paying 50% more than base gas price to buffer EIP1559 gas price increase by @brewmaster012 in #1672
  • chore: reconcile increment handler for v12.2.0 by @lumtis in #1673
  • fix: Trailofbits - make sure block number always increases by @ws4charlie in #1639
  • fix: fix emission params query and add unit tests by @kingpinXD in #1692
  • feat: TSS and Hotkey password Prompt - develop by @kevinssgh in #1630
  • fix: json-rpc.allow-unprotected-txs by @blockpinetwork in #1691
  • test(e2e): allow to run E2E tests on any networks by @lumtis in #1584
  • fix(crosschain): only use EVM supported chains for gas stability pool and prevent errors to stop iterating other chains by @lumtis in #1687
  • fix: cherry-picked fixes, double watched gas price and fix btc scheduler by @ws4charlie in #1693
  • fix: cherry pick hotfix v12.2.5 by @ws4charlie in #1727
  • fix: use chain parameter ConfirmationCount for bitcoin outtx by @ws4charlie in #1674
  • fix: remove the unnecessary multiplier in the convertGasToZeta RPC by @brewmaster012 in #1733
  • chore: add issue templates by @lumtis in #1729
  • fix: fix bitcoin fee rate and increase evm outtx inclusion timeout by @ws4charlie in #1713
  • feat: added cmd to encrypt tss keyshare file by @kevinssgh in #1744
  • chore: add Ethermint endpoints to OpenAPI by @fadeev in #1736
  • refactor: zetaclient re-organization by @kevinssgh in #1640
  • ci: Adding docker-compose for zetacored full rpc node and mainnet bitcoin node. by @gzukel in #1677
  • docs: add doc for encryption password entry by @kevinssgh in #1731
  • fix: evm outtx hash mismatch by @ws4charlie in #1750
  • ci: adding pipeline to build and push ubuntu, and macos docker images for zetacored by @gzukel in #1748
  • fix: gosec error for randomness library by @lumtis in #1753
  • feat: bitcoin dynamic depositor fee by @ws4charlie in #1747
  • fix: zetacored show-out-tx-tracker cli by @brewmaster012 in #1706
  • feat(crosschain): refund aborted amount by @kingpinXD in #1728
  • chore: remove standalone network by @kingpinXD in #1694

New Contributors

Full Changelog: v12.1.0...v12.3.0-rc

Changelog

Don't miss a new node release

NewReleases is sending notifications on new releases.