SatHunterSDR 0.2.0 beta 9
Android satellite-hunting SDR receiver. Install the APK below (allow installs from your browser or
file manager when asked).
Coming from beta 1 or beta 2: uninstall the old app once (Android says it "conflicts with an
existing package"). Those builds had a throw-away signature; from beta 3 on every APK is signed
with the same Z2Labs key and installs over the previous one.
New in beta 9
First satellite heard and decoded with it: ITUPSAT 1 on 70 cm CW (see docs/MEASUREMENTS.md).
- Weak signals show up: the spectrum now averages every FFT between two frames (before, one
FFT per frame was taken and ~97 % of the samples were skipped). FFT 8192 by default, 16384
selectable. A beacon 10 dB weaker than before is visible. - No more stutter: the CW demodulator used almost a whole phone CPU core, blocks were dropped
silently (choppy audio, a jumpy waterfall). CW is now 10x lighter, SSB / FM 3x. If blocks are
still lost the status line says so. - Span / decimation (/2, /4, /8) right above the mode buttons: a narrower span around the VFO
with finer FFT bins and less CPU. /8 gives 300 kHz with 37 Hz bins. - Satellite labels on the waterfall: every active downlink of the satellites above the horizon
that falls in the span, at its Doppler-shifted frequency (name, mode, elevation; transponders
with their passband). Tap next to a label to tune exactly onto it. - IQ recorder: the red dot next to play records what the receiver gets as an SDR++
compatible WAV into Downloads/SatHunter, with the receiver settings and satellite inside. - CW: 2 kHz filter by default (a beacon a few hundred Hz off is still heard); the VFO line is
faint on the waterfall, so a tracked beacon is not hidden under it. - RTL-SDR frequency correction (ppm) in Settings; automatic gain stops at 40 dB (an LNA in
front needs no more); a retune made while the RTL-SDR was opening is no longer lost (it could
leave the receiver on the wrong frequency while the display showed the right one). - Satellites tab works in landscape (list beside the details).
New in beta 8
- Hungarian satellites are no longer pinned to the top of the list (search for one and star it
if you want it there); only favourites are.
New in beta 7
- Nixie-tube frequency display, full width: tap the upper half of a tube to go up, the lower
half to go down, drag it to spin, long-press to type a frequency. - Volume slider next to the speaker button (0–200 %; the speaker button mutes).
- Clearer satellite list: labelled groups (Favourites · Overhead now · Next 2
hours · Later today), the pass in plain words ("In 12 min · 18:42–18:53", "Overhead now · 5 min
left" with a progress bar), maximum elevation coloured by how good the pass is.
New in beta 6
- Bias tee for the RTL-SDR (Settings → Receiver): 4.5 V on the antenna input to power an LNA
or active antenna. Remembered; the status line says "bias tee ON" while it is on.
New in beta 5
- "Best heard" order on the satellite list: favourites first, then the satellites the SatNOGS
ground stations receive most reliably (share of good observations weighted by how many there
are). Every row shows ♥ success rate · number of good observations. Press ⟳ once to download
the statistics. - Spectrum / waterfall divider is clearer and has a handle: drag it up or down to share the
height (remembered). - Full screen: the floating bar is slimmer; leaving full screen is a big separate button in the
corner, so it is not hit by accident.
New in beta 4
- Seamless dragging: every waterfall row remembers the frequency it was received at, so
while you drag, the whole history slides with your finger and new rows fill in from the side
(no jumping when the receiver retunes). - Center tuning (Settings → Receiver): the VFO stays in the middle of the screen and tuning
moves the whole spectrum, like SDR++. - New automatic gain for the RTL-SDR: it watches the ADC level and steps the gain down fast
when the signal clips, up slowly when it is weak (the tuner's own AGC overloaded on FM
broadcast). The status line shows the gain it chose.
New in beta 3
- Fixed release signature, updates install in place.
New in beta 2
- RTL-SDR Blog V4: the V4 is recognised from its USB product string (Android hands the driver
only a file descriptor, so the old detection could miss it and set the R828D up with the wrong
crystal, which made it nearly deaf). The status line under the frequency now says
"(RTL-SDR Blog V4)" when it was recognised. - Tuning digits: drag a digit of the frequency up or down, or tap its upper / lower half, to
change it. Long-press a digit or press the keyboard button to type a frequency in MHz. - Dragging the spectrum sweeps the frequency axis (like a map) instead of moving the marker.
Zoomed in, the view slides first; past the edge the receiver retunes and follows the finger.
Tap still tunes to the tapped frequency.
New in beta 1
- Full-screen mode (the ⛶ button on the receiver): the waterfall fills the screen, the
frequency, play/stop and mode buttons float over it and fade away after 4 s; a touch brings them
back. Swipe from the screen edge for the system bars. - RTL-SDR over USB OTG (RTL2832U + R820T/R828D; 250 kS/s – 2.4 MS/s, gain steps or auto).
- ESP32-S3 ESP-SDR over its native USB port: 2204–2804 MHz, 250 / 125 / 62.5 kS/s, gain
index 0–82, smooth in-stream tuning with firmware that supports it, firmware version shown. - Plug and play: plugging an SDR in switches to it (Android asks for permission once), unplugging
goes back to the demo source. Each source remembers its own frequency.
Since 0.1
- Satellites from SatNOGS DB and CelesTrak, pass list with favourites and Hungarian satellites
first, Doppler tracking, sky radar with compass and aim mode, simulated passes. - Demo source: works without hardware.
Known limits
- ESP-SDR: no wideband spectrum (SPEC) mode and no firmware updater yet; use a board with ESP-SDR
firmware already on it. - Decoder plugins: format and catalog only, the runtime comes next.
- Beta: please send feedback with the device model and what you were doing.