Eight radios now have native drivers. SDRplay RSP1, RSP1A, RSP1B, RSP2, RSPduo, RSPdx and RSPdx-R2 (through the SDRplay API 3.x you already have installed, no SoapySDR module in the path), Mirics MSi2500/MSi001 dongles, the RX888 mk2 (with the FX3 firmware built in, so nothing else to install) and the ADALM-Pluto over its network protocol (no libiio) join the RTL-SDR, HackRF and the three Airspys. Bind a USB radio to WinUSB with Zadig once and it appears in the Source list; the RX888 is done twice, as "WestBridge" and then as "RX888mk2", and the Source panel tells you which step is next. The Pluto is one row, "ADALM-Pluto (network)": choose it, type the address if it is not the default 192.168.2.1, press Open. A radio you had saved through SoapySDR opens natively by itself on the next start.
Keyboard shortcuts in the HDSDR spirit. Ctrl+F2 starts and stops the receiver, M mutes, + and - set the volume, Ctrl+F / Ctrl+Shift+F / Ctrl+A / Ctrl+U / Ctrl+L / Ctrl+C / Ctrl+R pick the mode, Ctrl+Up/Down tune, T types a frequency, Shift+R records, F11 fills the screen, F1 to F5 open the banks. Every one can be changed from the new Key bindings section in the SYSTEM bank (F7 goes straight there); only the keys you change are stored, and no shortcut fires while you are typing.
A plugin can play sound through FoxSDR. A decoder that produces audio, such as the coming DAB+ plugin, now replaces the receiver's audio while it is decoding and hands it back when it stops, with the same volume, mute and recording as everything else. The Sinks card says which plugin is playing.
Fixes. A saved radio that fails to open at startup is kept in the config rather than forgotten. Panel controls for the RSP (notches, HDR, antennas), the RX888 (dither, randomiser) and bias tees on the RSP, Mirics and RX888 HF port.
None of the four new radios has met real hardware here; the drivers are proven against the vendors' own reference code and protocol descriptions. The RTL-SDR, the Source list and the Pluto's failed-connection path were exercised live. Reports from those radios will be read closely.
SHA-256 of foxsdr-setup-0.93.0.exe:
67bc37f8e272ec53c663880232519723274504ab0cd03fd888160845afeba9ba