Recommended to remove the Integration from the Integration page before updating, then re add the Integration
Beta 5 Changes:
Gen2 & Gen3: (Untested on Gen2)
New Functionality
- Ability to discharge battery into the Grid.
- Please see the Wiki for details on usage.
- Unknown if it works for Gen2, as potentially registers are missing.
Added
Button:
- grid_export
Number:
- grid_export_limit
Select:
- export_duration
Sensor:
- modbus_power_control
Gen2:
Removed the following sensors
- eps_auto_restart
- eps_min_esc_soc
- eps_min_esc_voltage
Gen3:
Removed the following sensors
- discharger_start_time_1
- discharger_end_time_1
- discharger_start_time_2
- discharger_end_time_2
Renamed:
- power_control_timeout - export_duration
Gen4:
Removed the following sensors
- power_control_timeout
Beta 4 Changes:
MIC:
Added missing "Run Mode"
Swapped "Total Yield" & "Today Yield"
Beta 3 Changes:
MIC:
Inverter Serial Numbers for all know MIC Inverters, due to Serial Number being Inverted Internally to the Inverter.
Additional work to the Bit mask to correctly Identify sensors relating to the MIC Inverters.
Beta 2 Changes:
Inverted X3 Mic Serial for MP15 Inverters.
All:
New configuration options, allows setting the Baud rate for Serial Connections.
Configurations split into separate views.
Gen4:
Support for Numerous new sensors relating to Dry Contact and Solax Adapter Box.
Sensors set to disabled by default in this release.
X3 MIC / PRO:
Now supports the X3 Mic / Mic Pro.
Only a limited number of sensors are available on these Inverters.