github typedb/typedb 3.11.0-rc1
TypeDB 3.11.0-rc1
on GitHub

5 hours ago

Download from TypeDB Package Repository:

Distributions for 3.11.0-rc1

Pull the Docker image:

docker pull typedb/typedb:3.11.0-rc1

Breaking changes

This release breaks backwards compatibility.
This version is only compatible with TypeDB driver versions >= 3.11.0.
Connections from older drivers will be rejected.

New Features

  • Print TypeDB Studio link and Console command on server startup

    Adds clickable/runnable connect hints to the server startup output: 

      To connect with TypeDB Studio, open: https://studio.typedb.com/connect?address=http://localhost:8000&username=admin
  To connect with TypeDB Console, run: typedb console --address localhost:1729 --tls-disabled --username admin`

    Both substitute localhost when the listener binds to an unspecified address (0.0.0.0 / [::]). The Studio scheme and Console invocation follow the encryption setting; the Studio link is omitted if the HTTP endpoint is disabled.

  • Add default advertise-address retrieved from listen-address

    Remove pre-inserted advertise-address values from server endpoints configuration. Instead, auto-generate the advertise addresses based on the listen addresses following these rules:

    • if the listen address is an unspecified address (0.0.0.0), substitute the IP with loopback 127.0.0.1, preserving the original port -- this allows the clients to use 127.0.0.1 instead of 0.0.0.0 for connections, which is usually the intention;
    • otherwise, use the listen address for advertising as is.

    This reduces the amount of fields required for modifications in case the user wants to change the default server ports and helps avoid sudden misconfigurations while operating with local servers.

    Nothing changed for default configuration: 

    ./typedb server

=====================================================================================
     ________ __      __ _____    _______  _____    _____       _______  _______
    |__    __|\  \  /  /|   _  \ |   _   ||   _  \ |   _  \    |   _   ||   _   |
       |  |    \  \/  / |  | |  ||  | |__||  | |  ||  | |  |   |  | |  ||  | |__|
       |  |     \    /  |  |/  / |  |___  |  | |  ||  |/  /    |  | |__||  |___
       |  |      |  |   |   __/  |   ___| |  | |  ||   _  \    |  |  __ |   ___|
       |  |      |  |   |  |     |  |  __ |  | |  ||  | |  |   |  | |  ||  |  __
       |  |      |  |   |  |     |  |_|  ||  |/  / |  |/  /    |  |_|  ||  |_|  |
       |__|      |__|   |__|     |_______||_____/  |_____/     |_______||_______|

=====================================================================================

Running TypeDB CE 3.10.4 in development mode.
Serving:
  gRPC:  0.0.0.0:1729 (connect via 127.0.0.1:1729)
  HTTP:  0.0.0.0:8000 (connect via 127.0.0.1:8000)
  Admin: 127.0.0.1:1728 (localhost only)
TLS: disabled
  WARNING: TLS NOT ENABLED. Credentials are transmitted unencrypted in plaintext.
  Drivers must be configured to connect *without TLS*.

  • Improved query profiler

    We implement a real nested query profiling structure, which correctly captures sub-pattern timings and executions and eliminates redundant printing.

  • Extend TypeDB address configuration and reorganize TypeDB services for better extensibility, incl. clusters

    Introduce better extensibility to TypeDB CE, enabling TypeDB services to be extended and modified by distributions with additional functionality (e.g., clustered distributions for TypeDB Enterprise/Cloud).

    User-facing

    • Change server configuration. Rename server.address and server.http.address to listen-addresses (address aliases are still accepted for backwards compatibility). Add advertise-address configuration for both gRPC and HTTP endpoints, distinguishing the address the server binds to from the address clients use to connect (address advertised to the clients). Supports NAT, reverse proxy, and load balancer deployments. Specifying both listen-address and address will be rejected by the system.
    • Add an admin CLI tool (typedb admin) bundled with all distributions. The admin tool communicates with the server through a localhost-only gRPC endpoint (default port 1728). Supports interactive REPL mode, one-shot (--command), and script (--script) execution modes. Commands: server version, server status, help, exit.
    • Add server.admin configuration section (default: enabled on port 1728).
    • Restructure server startup output to a multi-line format showing each endpoint (gRPC, HTTP, Admin) with TLS status: 
    =====================================================================================
     ________ __      __ _____    _______  _____    _____       _______  _______
    |__    __|\  \  /  /|   _  \ |   _   ||   _  \ |   _  \    |   _   ||   _   |
       |  |    \  \/  / |  | |  ||  | |__||  | |  ||  | |  |   |  | |  ||  | |__|
       |  |     \    /  |  |/  / |  |___  |  | |  ||  |/  /    |  | |__||  |___
       |  |      |  |   |   __/  |   ___| |  | |  ||   _  \    |  |  __ |   ___|
       |  |      |  |   |  |     |  |  __ |  | |  ||  | |  |   |  | |  ||  |  __
       |  |      |  |   |  |     |  |_|  ||  |/  / |  |/  /    |  |_|  ||  |_|  |
       |__|      |__|   |__|     |_______||_____/  |_____/     |_______||_______|

=====================================================================================

Running TypeDB CE 3.8.3 in development mode.
Serving:
  gRPC:  0.0.0.0:1729 (connect via 127.0.0.1:1729)
  HTTP:  0.0.0.0:8000 (connect via http://127.0.0.1:8000)
  Admin: 127.0.0.1:1728 (localhost only)
TLS: disabled
  WARNING: TLS NOT ENABLED. Credentials are transmitted unencrypted in plaintext.
  Drivers must be configured to connect *without TLS*.

    Development

    • Expose config extensibility for distribution-specific settings. Cluster distributions need to parse additional config sections (e.g., server.clustering) from the same YAML file without modifying the base Config struct.
    • Add server_version and server_status RPCs to the admin protocol, returning distribution info and endpoint addresses.
    • Restructure the server package, introducing Operators that serve as a middleware between network services and inner TypeDB components (DatabaseManager, UserManager, etc.).
    • Introduce ErrorResponseCategory for mapping server state errors to appropriate gRPC and HTTP status codes and HTTP 307 redirect support (currently cannot be used in TypeDB for most of the endpoints due to local-only authentication -- instead, an additional AuthenticatedRedirect is introduced).
    • Add close signals for TransactionServices to extend the ability of the system to interrupt existing transactions without shutting down.

Bugs Fixed

  • Compress the content of docker images

    Reduce the size of the Docker image x2 (93 MB -> 53 MB prod, 361 MB -> 141 MB snapshot) by gzipping its layers explicitly in the Bazel configuration.

    This change returns the size of the Docker image to the values of the pre-Bazel 8 releases.

  • Fix connection-level GOAWAY errors under load

    Drivers that sustain transaction churn over a single TypeDB driver connection (e.g. several worker threads opening/committing/closing many small write transactions in a row) eventually saw every in-flight request fail at the same moment with h2 protocol error: too_many_internal_resets / broken pipe. Server logs showed: 

    WARN h2/proto/streams/streams.rs:1629:
    locally-reset streams reached limit (1024)

    followed by GOAWAY ENHANCE_YOUR_CALM. The server itself never panicked however,the gRPC connection was poisoned.

  • QueryCache tracks statistics & schema commit to avoid caching outdated plans
    Updates the QueryCache to explicitly track validity requirements and validate insert calls. By tracking the sequence_number of the latest schema commit, we avoid #7787. By tracking statistics, we avoid #7790

  • Rewrite reused producible variables in transform phase
    Introduces a transformation step which rewrites constraints so the variables bound by it are unique.
    E.g.: $r links (some-role: $r); is rewritten to $_i links (some-role: $r); $r is $_i;

Code Refactors

  • Eagerly free inputs of steps which are finished executing
    Frees fully consumed FixedBatchIterators from the IntersectionExecutor to save memory on long pipelines with few answers.

  • Refactor annotation phase to group annotation context & running variable annotations
    We reduce the number of arguments in functions in the annotation phase, by grouping related arguments together in structures.

Other Improvements

  • Escalate concurrent key and unique writes to transaction failure#7800 (#7800)

  • Disable all warnings on optional return mismatches
    Disable all warnings on optional return mismatches, till the spec is finalised

Check out latest releases or
releases around typedb/typedb 3.11.0-rc1

Don't miss a new typedb release

NewReleases is sending notifications on new releases.

Get notifications