If someone wonders why this title: https://e3d-online.com/blogs/news/sanjaymortimer
Most of my nozzle comes from E3D. He was such an inspirational man, and so enthusiastic in his videos.
The PrusaSlicer 2.4 may go out of beta in a not-distant future. The next version may well be the 2.4.58.
This 2.3.57 branch will continue to get fixes in the coming months. It's now the "long term support" one.
changes
- macos-arm build, thanks to @claytono. Tell me if it doesn't works.
- to allow it to run :
xattr -cr /Applications/SuperSlicer.app
- to allow it to run :
- Dense infill: fix the full fill density bug & rework detection settings:
- AutoNotFull: now print the dense infill only if the area to cover doesn't fill the sparse area.
- AutoOrEnlarged: now print the auto dense infill, unless the area to cover is wider than (nozzle diameter*2/infill ratio) and the enlarged version is smaller than the auto
- New: AutoOrDisable: now print the auto dense infill, unless the area to cover is wider than (nozzle diameter*2/infill ratio) or the area to cover fill the sparse area.
- Bridge improvements:
- Don't connect if too far away. Prevent printing a bridge over another one, following the perimeter.
- Better connection direction, as both are now tested.
- Fix some other rectilinear issues, crash, bugs #1889
- Bridge detector now compute much quicker than in the previous version.
- Fix wrong bridge offset (can lead to no bridge or some missing)
- Fix too detailed gapfill
- Add resolution_internal to control it (and gyroid)
- Disallow gapfill lines to be split in the middle when printed (now start at an end and not in the middle)
fixes
- Fix brim-raft bug. The behaviour isn't correct yet, but at least it's now useable. #1927
- Fix 'small perimeter' speed change #1948
- Fix missing lift/retraction #1967
- fix missing prusa sla #1963
- fix disjointed fill surface #2038
- Gapfill "star" should be less frequent
- Fix: allow extra wipe for 1-perimeter configs #2029
- Fix some cases where "no perimeter on bridge" won't activate #1917
- Avoid unneeded unretract followed by a retract in mid-air for sparse wipe tower. #1467
- Plater auto-center now ignore unprintable objects #2008
- Fix seam object for multiple instances with different rotations #2015
- infill_first also modifiable if sparse infill #1971
- Fix "grey" machine limits field for export. #1960
- Fix Calibration hyperlinks: open the os browser #2005
- Fix 'Internal error: ConfigBase::get_abs_value()' (bad initialization of the wizard) #1938
*Mmulti-line for milling custom gcode fields #2027 - Don't consider ' ' or '\n' for custom toolchange gcode detection #1368
- Don't allow 0-speed retraction #2033
- Update/fix "sliced info" to have the info per extruder & color
- Fix enforce_full_fill_volume for smooth pattern, when it splits from the half-offset.
- Tooltip, typos, ... #1981
- Fr localization update #2004 #1840
note: I haven't tested the linux & macos build.
You can have daily builds in the action menu of github.
You can support me with the "sponsor" button