Release version 0.37.0

This one adds TRAE CLI and Command Code as built-in agents, lets a Claude Code session continue on your phone with Remote Control, and has Claude Code suggest your next prompt. The side panel gains Automations, To-dos, Issues and Pull requests tabs and now holds Agent Plan and Message navigation, the model and option pickers under the message box merge into one button, and Claude Code moves up to 0.93.0 along with seven more bundled agents.
Alongside that: a sub-agent waiting on you can be answered right where it was delegated, images in replies show even when they are outside the conversation's folder, a reply that arrives just as a turn ends is no longer lost, switching Cline's model mid-conversation takes effect, saving a Cursor MCP server in codeg keeps Cursor's own settings, and computer use moves to cua-driver 0.36.0.

New

• ByteDance's TRAE CLI is now a built-in agent: codeg runs the traecli you installed, with its mode, model and reasoning effort pickers in the message box, its MCP servers and skills managed from codeg's settings, delegation, and history for the conversations you run in codeg, while its settings page offers Upgrade and an optional personal access token for servers and Docker. (#933 requested by @lwxk)
• Command Code is now a built-in agent: install it from Settings → Agents and sign in once with command-code login or save an API key, and codeg runs it with its mode, model and effort pickers in the message box, its MCP servers and skills managed from codeg's settings, delegation, and history for the conversations you run in codeg. (#951 requested by @terranc)
• Claude Code's Remote Control works in codeg: send /remote-control in a Claude Code conversation, and a strip above it shows the session's claude.ai/code link and a QR code for picking it up in the Claude app or a browser, with a Turn off button, while the session stays connected even after you close its tab.
• Claude Code suggests your next prompt: after a turn, the empty message box shows in grey what Claude expects you to ask next, and Tab fills it in without sending.
• The side panel gains Automations, To-dos, Issues and Pull requests tabs for the project of the conversation you're in, where you can check its automations and their runs, work through its to-do board, and browse its issues and pull requests (merge requests on GitLab), with Open full page one click away.
• Agent Plan and Message navigation move from the corner of the conversation into the side panel's Session Details tab, which opens with a card showing the title, agent, status, model, Git branch and copyable session IDs, while the plan shows its progress step by step, even when folded.
• Message navigation follows the message you're reading, and clicking a message jumps there and opens it to show the sub-agents its round ran, as cards that open their conversations, and the files it changed, each with an inline or side-by-side diff.
• A sub-agent that needs you can be answered in the conversation that delegated to it: its "Waiting for task result" row opens by itself with the permission, question or plan approval inside, and its badge turns from awaiting approval to checked once you answer. (#973 reported by @lwxk)
• The model, mode and other options under the message box merge into one button that lists the current settings separated by "/", leaving out options still on their default, and clicking it opens one panel where you change each setting in place, with search for long lists such as models.
• The automation and to-do editors show an agent's settings with the same button and panel, instead of a dropdown for each option.
• A folder group in the sidebar can open or clone a folder straight into itself: hover its heading for Clone Repository and Open Folder, and the new folder lands in that group, which expands to show it.

Improved

• Updated bundled agents: Claude Code ACP 0.93.0 (Claude Code 2.1.300), OpenCode 1.19.3, Cline 3.0.73, CodeBuddy 2.168.2, Grok 1.0.62, Cursor 2026.10.16, Qoder 1.1.73, Antigravity 1.4.1.
• Computer use moves to cua-driver 0.36.0, which codeg downloads the next time it is needed, and on Linux taking a screenshot no longer forces an agent to read the window again before it can click.
• The sidebar's tag filter moves into View options as its first entry, in place of the funnel button at the top of the sidebar.
• Clicking the side panel tab that is already showing hides the panel, and on phones tapping the selected tab closes the drawer.
• A new automation starts in the folder the Automations page is filtered to, instead of always the first open folder.
• The sidebar no longer marks conversations whose worktree was removed, and hovering one still shows its original path.
• The built-in model catalog is refreshed with 8,897 models from 230 providers, up from 8,894.

Fixed

• Images in a reply show even when they are outside the conversation's folder, such as a login QR code an agent saved in /tmp, instead of a broken-image icon. (#978 reported by @wuzhaozhongguo)
• In the desktop app, a sub-agent that is already waiting on you shows its request in a window that reloads or opens later, instead of the request never reaching it. (#973 reported by @lwxk)
• A reply that arrives just as a turn ends stays in that turn, instead of occasionally going missing with the turn reported as ending "without producing any response".
• Expanding a to-do's progress or completion report in its conversation shows the full text, formatted, with a line saying whether it was recorded on the to-do, instead of a bare {"recorded":true} from Claude Code and Codex.
• Switching Cline's model after the first message now takes effect, as does the model codeg reapplies when you reopen a Cline conversation, instead of requests staying on the old model while the picker showed the new one.
• Cline stays on the version codeg installed, instead of updating itself to its latest release once a conversation closes.
• Cline conversations keep the time they actually ended, instead of jumping to the top of the sidebar with the time Cline was next started.
• Saving a Cursor MCP server in Settings → MCP, or installing it again from the MCP Marketplace, keeps the settings Cursor adds itself, such as envFile, auth and tls, and an SSE server stays SSE instead of turning into HTTP.
• Cursor-only MCP settings no longer spread to other agents when codeg writes a server into their configs, where Cursor's auth made OpenClaw reject its whole config and pi skip the server.
• Slash commands with a colon in their name now show as one command in the message box, such as Qoder's new sites: commands, and reach the agent exactly as named.
• On the Automations page, the detail pane follows the folder filter instead of showing an automation from another folder, and a folder closed in the sidebar shows its name in the filter instead of a number.

Note

• TRAE CLI 2.0 is available only on TRAE Enterprise's flagship plan, and codeg runs the traecli you install with TRAE's own installer, signed in with traecli login.
• Command Code needs Node.js 22 or later, and models you add to Command Code yourself can't be picked in the message box, as it lists only its own catalog there.
• TRAE CLI's and Command Code's first integrations leave some things out: conversations from their own terminals can't be imported yet, one you set up as a custom agent stays separate with its own history, and so far both have been tested on macOS only.
• With Claude Code ACP 0.92.0 and later, Claude Code makes one more request after most turns to predict your next prompt, mostly read from the prompt cache but still counted in your usage, while automations and chat channel bots skip it.
• Remote Control needs Claude Code signed in with a claude.ai subscription and talking to api.anthropic.com, so it isn't available through a gateway or a custom ANTHROPIC_BASE_URL.
• The Session Details tab no longer shows token usage or the created and updated times, which the Session Details dialog, opened from a conversation's menu, still shows.
• Cline applies Plan or Act only when it starts working on a conversation, so switching modes after the first message has no effect until Cline changes that.
• CodeBuddy 2.168.2 runs every step of a conversation started in its own terminal through a single REPL tool, so such a conversation shows one REPL card per step in codeg, while conversations you start in codeg aren't affected.
• On macOS, a codeg that opens at login may not come back after an update started from 0.35.2 or earlier, so click its Dock icon to open it, while updates started from 0.36.0 or later aren't affected.

Thanks to @wuzhaozhongguo, @lwxk and @terranc for the reports.

发布版本 0.37.0

这一版新增了 TRAE CLI 和 Command Code 两个内置智能体，可以用 Claude Code 的远程控制在手机上接着聊同一个会话，Claude Code 还会预测你的下一条提示词。右侧面板新增了自动化、待办任务、议题和拉取请求四个标签页，计划任务和消息导航也挪进了面板的「会话详情」，输入框下方的模型和各项选项合并成了一个按钮，Claude Code 升级到 0.93.0，另有七个内置智能体更新了版本。
同期还有：等你处理的子智能体可以直接在发起委派的会话里批准，回复里会话文件夹以外的图片也能显示了，回合结束瞬间到达的回复不会再丢失，Cline 会话中途切换模型能生效了，在 codeg 里保存 Cursor 的 MCP 服务器会保留 Cursor 自己的设置，电脑操作改用 cua-driver 0.36.0。

新增

• 字节跳动的 TRAE CLI 成为内置智能体——codeg 直接运行你安装好的 traecli，输入框里可以选模式、模型和推理强度，MCP 服务器和技能可以在 codeg 的设置里管理，支持委派，在 codeg 里进行的会话也会留下历史记录；设置页里可以「升级」，还能填写可选的个人访问令牌，方便在服务器和 Docker 上使用。（#933 由 @lwxk 提出）
• Command Code 成为内置智能体——在「设置 → 智能体」里安装，用 command-code login 登录一次或填上 API 密钥后，codeg 就能运行它：输入框里可以选模式、模型和推理强度，MCP 服务器和技能可以在 codeg 的设置里管理，支持委派，在 codeg 里进行的会话也会留下历史记录。（#951 由 @terranc 提出）
• Claude Code 的远程控制（Remote Control）可以在 codeg 里用了——在 Claude Code 会话里发送 /remote-control，会话上方会出现一条提示栏，显示本会话的 claude.ai/code 链接和二维码，可以在 Claude App 或浏览器里接着聊，栏上还有「关闭」按钮；远程控制开着时，即使关掉标签页，会话也会保持连接。
• Claude Code 会预测你的下一条提示词——回合结束后，空着的输入框里会用灰字显示 Claude 猜你接下来要说的话，按 Tab 就能填入，不会直接发送。
• 右侧面板新增「自动化」「待办任务」「议题」「拉取请求」四个标签页，内容跟随当前会话所在的项目：可以查看项目的自动化和运行记录、处理待办任务看板、浏览议题和拉取请求（GitLab 上是合并请求），每个标签页都能一键「在完整页面中打开」。
• 计划任务和消息导航从会话左上角挪进了右侧面板的「会话详情」，面板顶部是一张信息卡，显示标题、智能体、状态、模型、Git 分支和可复制的会话 ID；计划任务会按步骤显示进度，折叠后也看得到。
• 消息导航会跟着你正在看的消息走，点一条消息会跳过去并展开，列出这一轮跑过的子智能体和改过的文件——子智能体卡片可以打开它的会话，每个文件都能展开看内联或左右分栏的 diff。
• 子智能体等你处理时，可以直接在发起委派的会话里批准——「等待任务执行结果」那一行会自动展开，里面就是权限请求、提问或计划审批，处理完后徽章会从「待批准」变成「已查询」。（#973 由 @lwxk 反馈）
• 输入框下方的模型、模式和其他选项合并成了一个按钮——按钮上用「/」分隔列出当前的各项设置，仍是默认值的选项不显示；点开后在同一个面板里逐项调整，模型这类较长的列表还能搜索。
• 自动化编辑器和待办任务的编辑、设置对话框也改用同样的按钮和面板来设置智能体，不再每个选项一个下拉框。
• 侧栏的文件夹分组可以直接把文件夹打开或克隆到组里——鼠标悬停在分组标题上会出现「克隆仓库」和「打开文件夹」，新文件夹会放进这个分组，分组折叠着也会自动展开。

改进

• 内置智能体版本更新： Claude Code ACP 0.93.0（Claude Code 2.1.300）、OpenCode 1.19.3、Cline 3.0.73、CodeBuddy 2.168.2、Grok 1.0.62、Cursor 2026.10.16、Qoder 1.1.73、Antigravity 1.4.1。
• 电脑操作改用 cua-driver 0.36.0，下次用到时会自动下载；在 Linux 上，智能体截图后不必再重新读取窗口就能接着点击。
• 侧栏的「按标签筛选」挪进了「显示选项」菜单，排在第一项，侧栏顶部的漏斗按钮去掉了。
• 再点一次右侧面板当前选中的标签页会隐藏面板，手机上点抽屉里已选中的标签页会关闭抽屉。
• 自动化页面按文件夹筛选时，新建的自动化默认放在该文件夹里，不再总是第一个打开的文件夹。
• 侧栏不再给源 worktree 已删除的会话加标记，鼠标悬停时仍会显示它原来的路径。
• 内置模型目录已更新，共 230 家供应商的 8,897 个模型（此前 8,894 个）。

修复

• 回复里会话文件夹以外的图片也能显示了，比如智能体保存在 /tmp 里的登录二维码，不再显示成破图图标。（#978 由 @wuzhaozhongguo 反馈）
• 桌面版里，已经在等你处理的子智能体，在刷新后的窗口或之后打开的窗口里也会显示它的请求，不会再一直收不到。（#973 由 @lwxk 反馈）
• 回合结束瞬间到达的回复会留在这个回合里，不会再偶尔丢失，并报「本轮没有产生任何回复就结束了」。
• 在待办任务的会话里展开进度或完成汇报，会显示完整内容，按 Markdown 排版，并注明是否已记录到待办任务，Claude Code 和 Codex 的会话不再只显示 {"recorded":true}。
• Cline 发出第一条消息后切换模型能生效了，重新打开 Cline 会话时 codeg 重新应用的模型也会生效，不再出现选择器显示新模型、请求却还在用旧模型的情况。
• Cline 会保持在 codeg 安装的版本，不会再在会话关闭后自己升级到最新版。
• Cline 会话会记下实际结束的时间，不会再在下次启动 Cline 时被改写成那一刻、跳到侧栏最上面。
• 在「设置 → MCP」里保存 Cursor 的 MCP 服务器，或从「MCP 市场」重新安装，会保留 Cursor 自己加的设置，比如 envFile、auth 和 tls，SSE 服务器也不会再变成 HTTP。
• Cursor 专属的 MCP 设置不会再被写进其他智能体的配置——以前 Cursor 的 auth 会让 OpenClaw 整份配置失效，pi 也会跳过这个服务器。
• 名称里带冒号的斜杠命令在输入框里会显示成一个完整的命令，比如 Qoder 新增的 sites: 系列命令，发给智能体的也是原样的命令名。
• 自动化页面的详情会跟随文件夹筛选，不再显示其他文件夹的自动化；侧栏里已关闭的文件夹在筛选里也会显示名称，而不是编号。

注意

• TRAE CLI 2.0 仅向 TRAE 企业版旗舰版套餐客户开放，codeg 运行的是你用 TRAE 官方安装程序装好、并用 traecli login 登录过的 traecli。
• Command Code 需要 Node.js 22 或更高版本；你自己给 Command Code 添加的模型没法在输入框里选，因为它在那里只列出自家目录里的模型。
• TRAE CLI 和 Command Code 首期接入还有一些限制——暂不支持导入在它们自己终端里进行的会话；你之前作为自定义智能体配置的版本保持不变，历史记录各自独立；目前两者都只在 macOS 上实测过。
• 从 Claude Code ACP 0.92.0 起，Claude Code 在大多数回合结束后会多发一次请求来预测你的下一条提示词，这次请求主要读取提示词缓存，但仍会计入用量；自动化和消息渠道机器人的会话不发这次请求。
• 远程控制需要 Claude Code 用 claude.ai 订阅账号登录、直连 api.anthropic.com，通过网关或自定义 ANTHROPIC_BASE_URL 使用时不可用。
• 「会话详情」标签页不再显示 Token 用量和创建、更新时间，从会话菜单里的「会话详情」打开的弹窗仍会显示。
• Cline 只在开始处理会话时应用 Plan 或 Act 模式，发出第一条消息后再切换模式不会生效，要等 Cline 自己改进。
• CodeBuddy 2.168.2 在它自己终端里新建的会话，每一步都通过同一个 REPL 工具执行，这类会话在 codeg 里会每一步显示一张 REPL 卡片；在 codeg 里发起的会话不受影响。
• 在 macOS 上设置了开机自启的 codeg，从 0.35.2 或更早版本发起的更新完成后可能不会自动重新打开，点一下程序坞图标即可打开；从 0.36.0 及之后版本发起的更新不受影响。

感谢 @wuzhaozhongguo、@lwxk 和 @terranc 的反馈。