github sinfiltros/AnyPad-PS5 v0.5.5-beta
AnyPad PS5 0.5.5-beta (4 Oct 2026)

pre-releaseone month ago

English

⚠️ KNOWN ISSUE: this version can break the console's own DualSense. While AnyPad searches/pairs it may detect the DualSense and pair it by mistake, and the DualSense stops working normally with the console. Keep your DualSense switched OFF while you pair other controllers. If it happens: reset the DualSense (small hole on the back, next to L2, ~5 s with a paperclip) and connect it with the USB-C cable. A fix is being worked on.
AnyPad PS5 0.5.5-beta — released 4 October 2026 — free your PS5 from the DualSense.

First beta. Built on 0.4.7-alpha (kept as its own release/tag) with one change: a blue "Pulsar PS" button in the AnyPad menu.

⚠️ You MUST create a new console user and assign the controller to it (tip: name the user after the controller, e.g. "PS4" or "Wii"). If the pad stays on the DualSense's user, games and emulators do not see it.

What's new

  • Blue "Pulsar PS" button in Mandos emparejados (the paired list), to the left of Olvidar, on every connected pad.
  • Up to 4 controllers at once; each connected pad has its own button to make it the active one.

When to use the PS button

  • It is only for pads that do not have a PS button, that is, any pad that is not a PlayStation one (not a DualShock 4 or DualShock 3): Xbox, Switch, 8BitDo, GameSir... A DualShock has its own PS button: press that one.
  • Pressing it is the same as holding PS on the pad. The console shows a system message again; it refers to the DualSense, to take back the priority.
  • With a pad that is not from PlayStation, the priority goes back to the DualSense. To give the control back to the paired pad, return to the AnyPad menu and press "Pulsar PS" again.

Status

  • Verified on a PS5 fat, firmware 10.01: DualShock 4. Controllers from other consoles and brands (Xbox, Nintendo Switch, 8BitDo and more) are implemented but not yet tested on a console: see COMPATIBILITY.md.
  • Stop AnyPad from the web page ("Apagar AnyPad PS5") before launching an ELF again: launching a new one on top of a running one leaves the Bluetooth chip jammed for about 40 seconds.

Español

⚠️ FALLO CONOCIDO: esta versión puede estropear el DualSense de la consola. Mientras AnyPad busca o empareja puede detectar el DualSense y emparejarlo por error, y el DualSense deja de funcionar con normalidad con la consola. Mantén tu DualSense APAGADO mientras emparejas otros mandos. Si ocurre: resetea el DualSense (agujero pequeño de la parte trasera, junto a L2, ~5 s con un clip) y conéctalo con el cable USB-C. Se está trabajando en un arreglo.
AnyPad PS5 0.5.5-beta — publicada el 4 de octubre de 2026 — libera tu PS5 del DualSense.

Primera beta. Parte de la 0.4.7-alpha (que se mantiene como release/tag propio) con un cambio: un botón azul «Pulsar PS» en el menú de AnyPad.

⚠️ OBLIGATORIO: crea un usuario nuevo en la consola y asígnale el mando (consejo: ponle al usuario el nombre del mando, p. ej. «PS4» o «Wii»). Si el mando se queda en el usuario del DualSense, los juegos y emuladores no lo ven.

Novedades

  • Botón azul «Pulsar PS» en Mandos emparejados, a la izquierda de Olvidar, en cada mando conectado.
  • Hasta 4 mandos a la vez; cada mando conectado tiene su botón para activarlo como principal.

Cuándo usar el botón PS

  • Solo sirve para mandos que no tienen botón PS, es decir, cualquier mando que no sea de PlayStation (que no sea un DualShock 4 ni un DualShock 3): Xbox, Switch, 8BitDo, GameSir... Un DualShock tiene su propio botón PS: púlsalo.
  • Pulsarlo equivale a mantener pulsado PS en el mando. La consola vuelve a mostrar un mensaje del sistema; se refiere al DualSense, para recuperar la prioridad.
  • Con un mando que no es de PlayStation, la prioridad vuelve al DualSense. Para devolver el control al mando emparejado, vuelve al menú de AnyPad y pulsa «Pulsar PS» otra vez.

Estado

  • Verificado en una PS5 fat, firmware 10.01: DualShock 4. Los mandos de otras consolas y marcas (Xbox, Nintendo Switch, 8BitDo y más) están implementados pero aún sin probar en consola: ver COMPATIBILITY.md.
  • Para AnyPad desde la web («Apagar AnyPad PS5») antes de volver a lanzar un ELF: lanzar uno nuevo encima de otro en marcha deja el chip Bluetooth atascado unos 40 segundos.

SHA-256: 1ed2d55924ebb08261a2167600c812f5f4a6529a57741fc78abdc112a8672989

Don't miss a new AnyPad-PS5 release

NewReleases is sending notifications on new releases.