Dragon's Crown Pro PC v1.4.1
Dragon's Crown Pro for PlayStation 4 as a native PC port for Windows and, experimentally, Linux and Steam Deck
No game files are included. You need your own legally obtained Dragon's Crown Pro PS4 package from one of the supported builds
If you use an earlier release, the launcher updater can install v1.4.1 while preserving your installed game files, saves, settings and logs
v1.4.1 is a stability, input and usability update on top of v1.4.0
It adds a complete Voice Language setting, a working Skip Intro, Exit Game shortcuts, installation from an already extracted game folder, a headless command line for front ends, Windows crash reports that can be attached to Bug Reports, and fixes for the Kraken crash, SteamOS touchscreens, the Steam Deck trackpad and Vulkan compatibility
Some of these changes could only be tested with logs and synthetic coverage, not on the original reporters' hardware. Where that is the case, this document says so
Voice Language
The former Japanese NPC Voices option has been replaced by Voice Language: Game Default, English or Japanese
It sets the language of every spoken voice
- Your own characters
- Other players
- Resurrected characters and AI party members
- Town and event NPCs
- Enemies
- Camp voices
- The narrator
Each character keeps its own voice, and the narrator you picked in the game stays the same narrator. Only the language changes
Menu & Subtitles are not affected
- Game Default leaves the game's own choice. That is English on the USA and European builds, while the Japanese and Asia / Hong Kong builds derive it from the game's language setting
- Both languages are already inside the installed game archive, so nothing in your game files or saves is modified
- A language whose voice files are missing from your installation is not offered
- A saved Japanese NPC Voices setting is carried over: On starts as Japanese and Off as Game Default
- The change applies at the next game start
This completes the work requested in Issue #43 and addresses Issue #69, which asked to choose the voice language, especially for resurrected characters. Reporter confirmation for #69 is still welcome
Skip Intro
Skip Intro now skips the startup logos (ATLUS, Basiscape and CRIWARE) and the opening movie, then starts at the title screen
- A first start without save data still shows the game's own save data prompt first
- Returning to the title screen later behaves exactly as in the original game
- Applies at the next game start
This is the fix for Issue #79, where the ATLUS logo was still shown
Kraken crash fix
Bug Report DCP-8LX692 reported a crash during the Kraken boss battle in Ghost Ship Cove
The Kraken's tentacles check a "broken" flag on their mast through a handle that is empty while no mast exists. The game then read memory through that empty handle and crashed
v1.4.1 answers an empty handle as "mast not broken", which takes the game's own normal path. A mast that exists is read exactly as before
- The fix is installed only where the exact faulting instruction sequence is found in the game executable
- If the sequence is not found, the game is left unpatched
- No other gameplay behavior is changed
- The Kraken fight also writes a small, limited set of diagnostic lines to the log, and a crash during it records the fight's state
Exit Game shortcuts
Closing the game no longer requires the window, Alt+F4 or a Steam overlay
- F9 closes the game while playing, and can be rebound under Controls, Port hotkeys
- Holding L1 + R1 + Options on one controller for 2 seconds closes the game too
- Controller Exit Shortcut in Controls turns the controller combination off
Both use the same clean shutdown as the title screen's Exit Game row and closing the window. They work with and without Steam, including SteamOS and Gamescope, and do not conflict with F1, F10 or F11
This is the implementation of Issue #78
Mouse, SteamOS and Steam Deck input
Mouse rebinding and Pointer Control
- Each mouse button, including Mouse 4 and Mouse 5, can now press any controller control: Cross, Circle, Square, Triangle, L1, R1, L2, R2, L3, R3, the D-pad, Options or Touchpad left and right
- The default bindings from v1.4.0 are unchanged and existing settings continue to work
- Pointer Control Mode can be Hold (default, the v1.4.0 behavior) or Always On, which moves the game's red hand pointer with the mouse without holding a button
- Mouse Controls and Pointer Control Mode can be changed live from the in-game Options menu (F1)
SteamOS touchscreens under Gamescope
Related to Issue #71
v1.4.0 routed the Steam Deck touchscreen to the touchpad path, but under SteamOS Gamescope turns a touch into a mouse pointer and a left click by default, which the game reads as an attack
v1.4.1 asks Gamescope for its Passthrough touch mode while the game window has focus and restores the previous mode when the window loses focus or closes
- A touch is the DualShock 4 touch surface and a short tap is a touchpad click
- Touching the screen moves no host cursor and presses no mouse button, so it no longer attacks
- Mice and Steam Virtual Gamepads are unchanged
DCP_TOUCH_GAMESCOPE=0keeps Gamescope's own touch handling- The log gains privacy-safe touchscreen route lines
Hardware confirmation from the affected SteamOS device is welcome. If the game is killed abruptly, Gamescope can be left in Passthrough until it is changed again
Steam Deck trackpad
On a Steam Deck in Gaming Mode, Steam Input presents the trackpads as a mouse and the Steam Virtual Gamepad has no touchpad
v1.4.1 handles this automatically
- Moving the trackpad moves the game's pointer without holding Pointer Control
- The left click becomes the pointer interaction and the right click stays Circle
- Other controllers are unchanged
- Steam Deck Trackpad on the Controls page can be set to Off to keep ordinary mouse behavior, for example with a plugged-in mouse
- When Steam Input is off and SDL opens the Steam Deck directly, the real controller touchpad is used instead
This continues the Steam Deck input work related to Issue #34, which remains open for its broader input-delay report
Graphics compatibility and window restore
GPUs without native barycentrics
Reported on a Qualcomm Adreno X2-45 in Issue #84
The renderer now chooses how to interpolate vertex data from the capabilities the GPU reports, not from its vendor
- GPUs without native barycentric support get an integer interpolation fallback
- NVIDIA GPUs with barycentrics keep their existing path
- There is no Qualcomm-only special case
- Pipeline and shader caches are versioned, so a cache from v1.4.0 is rebuilt automatically on the first launch
- The log gains a single
GPU compatibility:line with the selected route and capability flags
The affected Adreno X2-45 has not yet confirmed that the flashing is gone, so this is a compatibility fallback and not a confirmed fix. Logs from affected GPUs are welcome
Minimize, restore and Alt+Tab
Reported in Issue #77
The original log shows VK_ERROR_DEVICE_LOST during queue submission after the window returned from Alt+Tab or Show Desktop
v1.4.1 substantially hardens the suspected minimize and restore path
- Presentation is suspended while the window is minimized, hidden or has no drawable area
- A swapchain is never created with a zero size
- On restore, the swapchain is recreated before frames are presented again
- A lost surface during presentation is recovered by recreating the swapchain
- Suboptimal and out-of-date swapchains are still handled as before
- A real device loss is still treated as fatal
- A pending VSync change is applied correctly after a restore
This mitigates a suspected cause. The root cause of the original report has not been proven and reporter confirmation is still required
Installation and command line
Install from an extracted folder
Issue #80 asked for installation from a game that is already extracted
The Play page still has one Install game... or Reinstall game... button. It now opens a choice of
- From PKG...
- From extracted folder...
Both use the same installer, so the same checks, staging, verification and rollback apply
- The folder must be a complete game folder (
eboot.bin,sce_module,sce_sysand the rest of the game) - Files are hard linked on the same drive and copied across drives
- The source folder is only read
- A folder that overlaps the port's own folders is refused
- An extracted update on its own is not accepted, only package updates
- Reinstall keeps your settings, saves, shader cache and logs, and a failed install leaves the previous one in place
Headless commands
Two commands run without opening the launcher, a window or the game
dragons_crown_pro.exe --install "D:\Games\DragonsCrown.pkg"
dragons_crown_pro.exe --install "S:\DCP-extracted"
dragons_crown_pro.exe --check-game
--installtakes a decrypted PKG or a complete extracted game folder and prints its progress--check-gameonly reports whether the active build is ready, with its build, Title ID and version, and writes nothing- Exit codes:
0installed or ready,1failed or not ready,2invalid arguments - No log file is written
- The Windows executable is a GUI program, so read the exit code with
Start-Process -Wait -PassThru(PowerShell) orstart /wait(cmd)
Linux uses the same commands with ./dragons_crown_pro or the AppImage. Details are in docs/LAUNCHER.md
Skipped launcher keeps your saved patches
When Show this launcher is Off, or --dcp-skip-launcher is used, the saved Controller prompts and Arachnophobia Safe Mode are now applied to the game archives before the game starts
- Nothing is rewritten when the archives already match the saved settings
- If applying them fails, a window explains it and the game is not started with settings that contradict your choice
Bug Reports and diagnostics
Windows crash reports
On Windows, a game crash now writes a crash file next to the log (dragons_crown_pro_NNN.dmp)
- The Bug Report page marks a log Crash detected only when its own crash file exists
- Attach crash report is on by default for that log, and you can untick it to send the log alone
- Only the crash file belonging to that log can be sent, up to 8 MiB
- A crash file may contain process memory used for diagnostics and, unlike the log, is not filtered by the privacy filter
- Nothing is sent unless you press Send report
- The preview lists the crash report by name and size and never its bytes
- Linux keeps the text log only and does not create crash files
- Crash files are never part of the downloads
The crash file travels with the same report and the same Report ID. The upload is resumable: it tries up to three times, continues from what the service already holds, and if it still fails the page shows Retry crash report upload, which reuses the same Report ID instead of filing a second report
Developer feedback in My reports
When a fix is ready to test, My reports can show the developer's message and ask Did this fix the issue? with Yes, fixed and No, still happening
- The answer contains no free text and never changes the report's status
- After No, the page suggests sending a new Bug Report with fresh logs and offers a button to do it
- Pages that read data, such as Bug Report, Editor and Trophies, now show a Loading... view instead of looking empty
Startup diagnostics
The log now records the selected GPU compatibility route, the touchscreen and trackpad routes, voice language banks and the state of crash file creation
Release validation
The final release gate was run on Windows with the Linux gate inside WSL
85 PASS, 0 FAIL, 2 BLOCKED
The two blocked entries are not test failures
CUSA102091.02 Asia / Hong KongCUSA104871.03 Europe
They are blocked because their real executable revisions were not available locally. Their structural coverage remains in the gate, but they have no real-executable validation
New focused test suites cover the Kraken fix, the GPU compatibility route, window restore and presentation, SteamOS touchscreens, the Steam Deck trackpad, crash files and their upload, Voice Language, Skip Intro and the headless commands. The long test runs now report live progress
Fixes and improvements
- Voice Language added, replacing Japanese NPC Voices
- Skip Intro now skips the startup logos and the opening movie
- Kraken tentacle crash fixed
- F9 and controller Exit Game shortcuts added
- Mouse buttons can press any controller control
- Pointer Control Mode Hold and Always On added
- SteamOS touchscreen no longer acts as a mouse click under Gamescope
- Steam Deck trackpad moves the pointer automatically in Gaming Mode
- Vulkan interpolation fallback for GPUs without native barycentrics
- Window minimize, restore and Alt+Tab presentation hardened
- Install from an extracted game folder added
- Headless
--installand--check-gameadded - Saved Controller prompts and Arachnophobia Safe Mode applied when the launcher is skipped
- Windows crash reports can be attached to Bug Reports, with resumable upload
- Bug Report developer feedback and Loading views added
- Startup and GPU compatibility diagnostics added
- Windows and Linux release gates kept equivalent, with a SHA-256 fallback for shells without
Get-FileHash
Bug Reports
| Report | Area / symptom | Status in v1.4.1 |
|---|---|---|
| DCP-8LX692 | Kraken boss battle crash reported on v1.3.0 | Fixed. A tentacle's missing mast no longer makes the game read through an empty handle |
| DCP-H5L2EG | Touchscreen generated mouse behavior instead of native touchpad input | Further addressed. v1.4.0 routed it to the touchpad path and v1.4.1 handles SteamOS / Gamescope. Related: Issue #71 |
| DCP-8G6HDU | SteamOS / Gamescope touchscreen input path | Addressed in v1.4.1 with Gamescope touch handling. Hardware confirmation welcome |
| DCP-2TG3WE | Steam Deck trackpad Pointer Control stopped responding while other controller inputs were used | Further improved. Related: Issue #34 |
| DCP-FHYNJM | Steam Deck trackpad in Gaming Mode did not move the game's pointer without a held button | Addressed. Gaming Mode now uses the pointer automatically, with an Off setting |
Bug Report IDs are diagnostic references generated by the launcher's Bug Report system and do not have public URLs unless the same problem also has a GitHub Issue
Issues and community reports
Community reports relevant to v1.4.1 include
- Issue #24 Xbox controller A/B reversed for Player 2 and above, still open and not proven fixed. Retesting with two controllers and Japanese Menu Buttons Off is welcome
- Issue #34 Steam Deck input delay, with further trackpad improvements in v1.4.1 while the broader report remains open
- Issue #35 window size when Windows DPI is not 100%, corrected before v1.4.1 and awaiting reporter retest
- Issue #43 Japanese voices for enemies and AI allies, completed through Voice Language
- Issue #57 Bazzite / Game Mode black screen, still under investigation
- Issue #69 voice language selection, addressed by the complete Voice Language setting, reporter confirmation welcome
- Issue #71 SteamOS touchscreen, additional Gamescope fix added, hardware confirmation welcome
- Issue #75 high online latency in some network configurations, still open
- Issue #77 crash after returning from Alt+Tab or Show Desktop, the suspected restore path is substantially hardened and reporter confirmation is required
- Issue #78 shortcut to close the game, fixed
- Issue #79 Skip Intro not skipping the ATLUS logo, fixed
- Issue #80 install from an extracted folder, fixed
- Issue #84 screen flashing on Qualcomm Adreno X2-45, compatibility fallback added and the flashing is not yet confirmed gone
Not every issue listed above is fixed in v1.4.1
This section also documents active community reports that remain relevant after the release
Pull requests and development history
Related community pull requests
- PR #64 - Route enemy and AI ally voices to Japanese by Shmubbier. It was not merged directly. Its Japanese enemy and AI ally voice routing was incorporated earlier and is a foundation for the complete Voice Language setting in v1.4.1, so it deserves credit in the development history
- PR #73 - Headless --install / --check-game, and saved controller prompts applied when the launcher is skipped by shinseiryuu. It was not merged directly. Its goals were incorporated and reimplemented against the v1.4.1 launcher, and the headless commands were designed with front ends such as the Crowbar frontend in mind
Thanks to both contributors
v1.4.1 contains 17 commits on top of v1.4.0
View the complete v1.4.0 to v1.4.1 comparison
Supported game versions
| Region | Title ID | Versions |
|---|---|---|
| USA | CUSA10454
| 1.00 and 1.01 |
| Japan | CUSA07001
| 1.00, 1.02 and 1.03 |
| Asia / Hong Kong | CUSA10209
| 1.00 and 1.02 |
| Europe, experimental | CUSA10487
| 1.03 |
The release gate passes for the six builds that have real executables available, although some archive-dependent checks on USA 1.01 are covered structurally
CUSA10209 1.02 and CUSA10487 1.03 remain officially supported, but their real executables were unavailable for runtime-hook validation
The release therefore does not claim real-executable validation for those two revisions
Windows
- Windows 10 version 1903 or newer, or Windows 11
- 64-bit
- Vulkan support
- Direct3D 11 through ANGLE remains Windows-specific by design
- The Windows executable is not digitally signed, so SmartScreen may warn on first launch
- Executable version: FileVersion 1.4.1.0, ProductVersion 1.4.1
Final package inspection found no game data, PKG files, eboot.bin, user saves, logs, crash dumps, PDB files, DEBUG_SAULO markers, local repository paths, RenderDoc binaries or development Vulkan layers
Linux / Steam Deck
Linux remains an experimental native x86-64 AppImage build
It does not use Wine or Proton
The AppImage contains the same cross-platform gameplay features introduced in v1.4.1, including Voice Language, Skip Intro, Exit Game shortcuts, mouse rebinding, the SteamOS touchscreen and Steam Deck trackpad handling, installation from an extracted folder and the headless commands
Linux-specific differences remain by design
- Direct3D 11 / ANGLE is Windows-only
- Linux uses native POSIX/OpenSSL online transport
- Linux does not create crash files, so Bug Reports send the text log
- Linux updates replace the AppImage instead of using the Windows updater helper
The AppImage was built on the project's Ubuntu 20.04 release baseline. The highest GLIBC version it imports is GLIBC_2.30, and the supported baseline remains glibc 2.31
Known issues
- Issue #24 Xbox controller A/B reversal for Player 2 and above is not proven fixed
- Issue #34 broader Steam Deck input-delay investigation remains open
- Issue #57 Bazzite Game Mode black screen remains under investigation
- Issue #75 high online latency remains open for some network configurations
- Issue #77 the Alt+Tab / Show Desktop path is hardened, but it still needs confirmation from the reporter
- Issue #84 the Adreno X2-45 flashing is not yet confirmed fixed
- If the game is killed while using the SteamOS touchscreen handling, Gamescope can stay in Passthrough touch mode until it is changed again
- Real executable validation for
CUSA102091.02 andCUSA104871.03 remains pending because those executable revisions were unavailable
Downloads
Windows 10 / 11 x64
Download DragonsCrownProPC-v1.4.1-windows-x64.zip
Extract the ZIP into a writable folder and run dragons_crown_pro.exe
Linux x86-64 / Steam Deck
Download DragonsCrownProPC-v1.4.1-x86_64.AppImage
Make the AppImage executable and run it
Full installation and configuration information is in the README
Linux and Steam Deck details are in docs/LINUX.md
Online behavior and crash report upload are documented in docs/ONLINE.md
Launcher behavior, installation and the headless commands are documented in docs/LAUNCHER.md
Cheat behavior is documented in docs/CHEATS.md
Security
The exact final v1.4.1 release artifacts and executables were checked with VirusTotal before publication
At the time of validation all four scans reported OK
VirusTotal is an additional verification signal and not an absolute guarantee of safety
| File | SHA-256 | VirusTotal |
|---|---|---|
DragonsCrownProPC-v1.4.1-windows-x64.zip
| 8471a470c86d0580c7b688620c25b5ca86f908a2258e23b1c5e0977a65758367
| VirusTotal |
DragonsCrownProPC-v1.4.1-x86_64.AppImage
| 4e8c351affa8cff79e7b097d7830c4a7c592e0a9f237420bdee0679dcfb4260b
| VirusTotal |
dragons_crown_pro.exe
| 7f4e50dd5fe398da0662f0a77368d4e0ee99a0b4518172237546b00e65e9ef71
| VirusTotal |
trg-updater.exe
| 23c45164509c311621c0f2673d52129c966e8bb1743acb40a97cd94453b1cd70
| VirusTotal |
Final release inspection found no DEBUG_SAULO markers, local repository paths, user saves or logs, crash dumps, game data, PDB files or development symbol packages inside the public downloads
Checksums
| File | Size | SHA-256 |
|---|---|---|
DragonsCrownProPC-v1.4.1-windows-x64.zip
| 34139327 bytes | 8471a470c86d0580c7b688620c25b5ca86f908a2258e23b1c5e0977a65758367
|
DragonsCrownProPC-v1.4.1-x86_64.AppImage
| 29333824 bytes | 4e8c351affa8cff79e7b097d7830c4a7c592e0a9f237420bdee0679dcfb4260b
|
The matching .sha256 files are included with the release
Changes since v1.4.0
v1.4.1 contains 17 commits on top of v1.4.0
View the complete v1.4.0 to v1.4.1 comparison
Thanks to everyone testing Windows, Linux, Steam Deck, SteamOS, local multiplayer and Online Play, to everyone sending Bug Reports and GitHub Issues with enough information to reproduce and investigate problems, and to the community contributors whose pull requests and ideas shaped this release