github prusa3d/Prusa-Firmware-Buddy v8.0.2
8.0.2 Firmware for Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+, MINI

35 minutes ago

Summary

  • New features
    • New option to set the Printer Type manually [XL/+]
  • Fixes
    • Fixed a crash when crash detection triggered during homing (#5530)
    • Fixed a crash in First Layer Calibration when the MMU slot was unknown [MMU] (#5552)
    • Fixed a crash when an OpenPrintTag spool with incomplete data was placed on the reader [C1/C1L]
    • Fixed security issues in the handling of USB devices, USB drives, PrusaLink and Prusa Connect

This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.

New option to set the Printer Type manually [XL/+]

At every start, the printer detects whether it is an XL or an XL+, based on whether it finds the XL-CAN bridge. If the detection gives the wrong result on your printer, you can now set the type yourself in Settings → Hardware → Printer Type:

  • Auto – the default; keeps the automatic detection and shows the type detected at the last start in parentheses, for example Auto (XL+)
  • XL – the printer always runs as an XL
  • XL+ – the printer always runs as an XL+

After you change the type, the printer asks whether to restart, because the new type takes full effect only after a restart.

NOTE: While the type is set manually, the printer still looks for the XL-CAN bridge at every start. If the result does not match the selected type, a Printer Type Mismatch warning appears, so a disconnected XL-CAN bridge on an XL+ does not go unnoticed.

Fixed a crash when crash detection triggered during homing (#5530)

If crash detection triggered while the printer was homing, the printer could stop with a blue error screen. On the XL this mostly happened when the printer homed while recovering from a filament runout or a stuck filament. Crash detection is now paused during homing moves.

Fixed a crash in First Layer Calibration when the MMU slot was unknown [MMU] (#5552)

On a printer with the MMU3, First Layer Calibration could stop with a blue error screen when the printer did not know which MMU slot was loaded, for example after a restart with filament already in the extruder. In that case the calibration now uses the filament set for the first MMU slot.

Fixed a crash when an OpenPrintTag spool with incomplete data was placed on the reader [C1/C1L]

An OpenPrintTag missing some information, for example one with neither a material type nor a material abbreviation, could crash the printer each time the spool was placed on the reader. The filament prompt now opens and leaves the missing information blank.

Fixed security issues in the handling of USB devices, USB drives, PrusaLink and Prusa Connect

A specially crafted USB device or USB drive, or a malformed command sent through PrusaLink or Prusa Connect, could crash or freeze the printer or corrupt its memory. These issues are fixed.

Don't miss a new Prusa-Firmware-Buddy release

NewReleases is sending notifications on new releases.