v1.1.0-rc.2
Added
- Choose a tool on the Filament panel without changing tools - on tool changers and other multi-head printers, such as the Snapmaker U1 and Medusa HC, the Filament panel's tool selector now only picks which tool the panel works on, without moving the carriage. The temperature card, its mini graph, the material presets, Cool Down and the preheat before Load, Unload, Extrude and Purge all follow that tool. Before, choosing a tool there started a tool change.
- Pick up and Park on the Filament panel - a button beside the tool selector picks up the chosen tool or parks it. Extrude, Retract and Purge pick up the chosen tool first when it is not on the carriage, with the usual tool change confirmation if you have it turned on, and send nothing if the pickup fails.
- Heat any tool from Controls - on multi-head printers the nozzle row in the Controls temperature card has its own tool chooser, its edit button sets that tool's temperature, and tapping the row opens the temperature graph on the tool it shows. The temperature screen also remembers the nozzle you picked until HelixScreen restarts.
- Home single axes from Motion - the Motion panel has a home bar for All, X, Y and Z, like the one on the Controls panel.
- All in the Load and Unload picker - the picker that loads or unloads several tools at once has an All row that checks every tool. It is hidden when the filament system cannot run that many at once.
Changed
- Filament system settings in the header - the Settings button on the filament system screen is now a gear in the header, so the action buttons below it no longer leave one button on its own. On multi-head printers the Currently Loaded card also shows which tool is mounted.
- Load picker rows say only what the sensor knows - a slot is called ready to load only when its sensor sees filament, and empty when the sensor sees none. A slot with no sensor shows only its material.
- Tool choosers number tools the way the screen does - the closed tool choosers on Controls and Filament show the tool's name or number as the rest of the screen counts it, instead of the G-code name, and fit their text without running under the arrow.
- Motion shows what the Z keys move - the Z column on the Motion panel draws your printer's toolhead, or the bed on printers where the bed moves, instead of the words Print Head or Bed.
- Controls fits portrait screens - on tall screens such as 272x480 and 320x480, tapping the Position card opens Motion, and Motors Off is a small button in the card header. The Cooling card shows Part Fan with its speed on the left and the other fans on the right, so nothing runs past the card.
- Temperature targets are buttons - the Controls temperature card shows each target in an outlined button that opens the keypad, instead of a pencil icon that cut off the values on narrow screens. Tapping the rest of the row still opens the temperature graph.
Fixed
- Unit cards on the Multi-Filament Overview show every lane - the filament color bars now span the whole card instead of sharing it with the temperature and humidity box, which cut them down to one or two bars and a "..." in place of the lane count. When the card has room, the temperature and humidity sit on one line under the bars. When it does not, the card leaves them out, and tapping the unit still shows them. A unit with one lane now reads "1 lane" instead of "1 lanes".
- Screen Sharing while pairing - while the pairing screen is open, the shared screen shows a placeholder instead of the printer's display.
- Z offset saves on printers that home Z on a switch - on a printer with a probe that homes Z on its own endstop switch, such as a stock Voron 2.4 or an Ender with a BLTouch used only for the bed mesh, Z offset calibration and Save now set the Z endstop position, so the change survives a restart. Before, they changed the probe offset, which does not move the nozzle on those printers. A delta without a probe now adjusts the offset for the session only, because Klipper has no endstop calibration for deltas.
- Timelapse settings show the real values - the Timelapse Settings screen reads the plugin's settings as Moonraker sends them, so Enable Timelapse, Auto-render and the other options show what is actually set instead of the defaults.
- Timelapse frames are captured after setup - when Klipper has not loaded the timelapse macros, HelixScreen adds them to its own helix_macros.cfg and offers Restart Klipper, on the setup screen and on Timelapse Settings. When it can't, it shows the line to add to printer.cfg. Before this, a new install never captured a frame until printer.cfg was edited by hand.
- Timelapse updates after a reinstall - when HelixScreen runs on the printer, setting up timelapse or opening Timelapse Settings puts an older moonraker-timelapse checkout back on its main branch when that is safe, so Moonraker can update it again.
- Timelapse video previews - Timelapse Videos shows the preview image moonraker-timelapse saves with each video instead of a placeholder.
- Reset no longer cancels the print on a CFS - the Reset button and dismissing a filament error dialog sent a cancel on Creality printers with a CFS, even in the middle of a print, and unloaded the lane on an Anycubic ACE. Clearing an error now sends nothing to those systems, and an error the filament system still reports stays on screen instead of closing and reopening.
- No Cancel during a CFS load - a CFS load cannot be stopped once it starts, so the Cancel button that did nothing until the load finished is no longer offered.
- Unloading a CFS spool that ran out - when the CFS has reported that a spool ran out and an unload leaves filament in the toolhead, the error now says the CFS cannot pull the leftover filament back and asks you to remove it by hand. Before, it suggested the cut or retract may not have finished.
- CFS chute calibration errors (#2007) - a failed step shows one message in plain words instead of two, one of them raw firmware text, and a Klipper disconnect during calibration is now reported. If the toolhead cannot return to park after a good save, the screen keeps the saved position and says the head may still be at the chute.
- CFS on Jacobean's K2 Plus firmware - the spool editor opens on the product the box reports and saves its name, Reset, Recover and Clean Nozzle send the commands that firmware has, and Refresh RFID is no longer offered because the firmware has no such command. When that firmware is set not to unload after a print, the warning about an empty toolhead before a print is kept.
- Clearing a filament error on the AD5X IFS - clearing an error on the IFS now unlocks it once, so a timed out operation no longer leaves it locked. On Forge-X, a driver fault the module still reports stays on screen until Recover clears it.
- Spaghetti detection switch on the Snapmaker U1 - the Spaghetti Detection switch and the alert's Turn off detection button now turn the U1's own detection off and on. The first connect after updating keeps whatever the printer is already set to, and after that HelixScreen sends the setting only when it differs from the printer's.
- Recovery when Klipper never starts - when HelixScreen connects while Klipper is not running at all, the recovery dialog now opens instead of leaving the screen half loaded, and its Restart Klipper and Firmware Restart buttons restart the Klipper service. Restart Klipper elsewhere, such as on the Advanced screen, now does the same instead of failing.
- Settings crash with plugins installed (#2103) - opening Settings no longer crashes after the plugin list changes, as happened on a Snapmaker U1.
- Spool editor without a filament system (#2097) - on a printer with no filament system, the spool editor no longer stays on "Loading lane details" with Save turned off.
- OrcaSlicer ids from a custom catalog (#1908) - a filament from your own catalog entries no longer writes an id that no OrcaSlicer preset can match into the printer's lane record.
- Clearer debug bundles when Klipper is down - a debug bundle taken while Klipper has never reported a state says so instead of calling it a shutdown, and a log read straight from the printer's disk names the file and how old it is.
- Screensaver on screens that dim (#2120) - choosing a screensaver now starts it after the timeout on every screen. On a screen with a dimmable backlight the timeout row is called Screensaver after while a screensaver is chosen, and picking one while that timeout is Never sets it to 10 minutes. Before, a screensaver chosen with Screen Dim set to Never never appeared.
- Bypass spool the same size as the others - on the filament system screens the bypass spool is now drawn the same size as the spools in each unit, instead of smaller.
- Direct AFC units drawn without a hub - on the Multi-Filament overview, an AFC unit whose lane runs straight to its own toolhead, such as a toolchanger's one-lane Tools unit, is now drawn going directly to that toolhead instead of through a hub box it does not have.
- Hubs on the overview only where lines meet - the Multi-Filament overview now draws a hub only where two or more units feed the same toolhead, as one box where their lines join. A unit that feeds a toolhead on its own goes straight to it, and its hub sensor shows on that line. A hub with a buffer is drawn as one Hub+BUF box. Lines no longer cross or touch each other unless their ends are swapped, and units whose cards are scrolled off the same side keep separate lines.
- No tool shown mounted on a parked AFC toolchanger - on a toolchanger run by AFC, parking every head now shows no tool on the carriage. Before, the screen kept showing the first tool, or the tool whose lane AFC last loaded, as mounted. AFC printers with a single toolhead are unchanged.
- Assigned Tool with AFC multiple tool mapping - when multiple tool mapping is turned on in AFC, the Assigned Tool choice in the lane editor is disabled and says that tools are assigned in AFC. Before, choosing a tool there sent a change that AFC applied differently, so the lane kept showing its old tool.
- Part Fan slider sets the part fan - on printers whose part cooling fan is a named fan rather than the plain fan, the Controls slider now changes that fan instead of a different one.
- One dialog on a Happy Hare 4.2 pause - when Happy Hare 4.2 pauses a print, HelixScreen now closes Happy Hare's own Pause Notice when its recovery dialog opens, as it already did with the Error Notice of earlier versions. Before, both dialogs stayed on screen.
- Clear Spool resets the gate temperature on Happy Hare - clearing a gate now sets its temperature back to the printer's default extruder temperature on every Happy Hare version. Newer Happy Hare builds keep a gate's temperature unless it is named, so a cleared gate kept the old spool's temperature.
- Part Fan slider knob shows whole - the slider knob on the Controls Cooling card is no longer cut off at its ends or along its top and bottom on small screens.
- Nozzle Temps rows open their own tool - on multi-head printers, tapping a tool in the home screen Nozzle Temps widget opens the temperature graph on that tool instead of the one on the carriage.
- Debug bundles explain a Klipper that stopped - a debug bundle now includes the kernel's out-of-memory and crash records, so it can show whether Klipper was killed for lack of memory or crashed. When Klipper writes its log somewhere other than the file Moonraker serves, the bundle reads the log Klipper is actually writing, and it marks a Klipper log that is older than Klipper's latest start. It also includes the HelixScreen launcher log, which records every time the screen app exited and why.
- Screen Sharing behind a reverse proxy - taps on the shared screen now work through a reverse proxy in front of the printer that sends the browser's host name in
X-Forwarded-HostorForwarded, on printers where Moonraker decides who gets in. Opening the screen address without its final slash now stays on the proxy's address instead of jumping to the printer's own. An existing setup gets this the next time the HelixScreen installer runs. - Screen Sharing webcam keeps the screen's shape - the HelixScreen Screen webcam that Mainsail and Fluidd show now gets the screen's own proportions, such as 5:3 on an 800x480 screen, instead of 4:3, so the tile no longer has bars or cuts off the picture. A webcam added before this update keeps the aspect ratio it has, including one you chose yourself. To have it set from the screen, turn Add to Mainsail/Fluidd Webcams off and on again.
- Restart HelixScreen from Mainsail and Fluidd after installing - when the installer adds HelixScreen to Moonraker's list of services it may manage, it now restarts Moonraker so the list takes effect. Before, a reinstall that only added HelixScreen to that list left it out until Moonraker next restarted.
- Clear message when Klipper cannot be restarted - on a printer where Moonraker cannot restart services and HelixScreen has no recovery script of its own, such as a Snapmaker U1 running the extended firmware, Restart Klipper and Firmware Restart now say that the printer must be turned off and on again, instead of showing Moonraker's "not allowed" error.
- Klipper version on printers without a git install - when Klipper reports no version of its own, as it does when it is not installed from git, such as on FlashForge printers running Z-Mod, the Printer Manager and About screens now show the version Moonraker's update manager knows for it instead of Unknown.
- Bed mesh shows in the pre-print checklist during an adaptive mesh - on printers without a dedicated start profile, the checklist now marks Bed mesh active when Klipper starts an adaptive mesh inside the start macro, and counts its probe points against the adapted grid. Before, Klipper's adaptive mesh messages were not recognized, so the step was never shown as running.