github pengchujin/aerial-tv v1.86
Aerial 1.86

5 hours ago

中文

主页键和开机

  • 设了「开机时打开」的 App 或信号源:被原桌面盖住时重新打开它,不再只回到 Aerial(#1229)
  • 小米等安卓 6 电视:开机后不再因为查询前台卡住导致遥控器失灵、停在原桌面(#1284)
  • 创维预装当贝桌面(7S72 等):按主页键能回到 Aerial(#1297)
  • 当贝盒子等按主页键会强停 Aerial 的机型:进程一回来就打开 Aerial,不用等守护重新绑定(#1245)
  • 海尔 YunOS:固件开机拉起的蓝光影院会被拉回 Aerial;安卓 7 以下 Aerial 自己开通知监听,被强停后能回来(#1301)
  • 红米投影仪 mt5873:安装脚本改装 guard 版,避免装 standard 后卡开机(#684,卡开机本身没有修好)

适配

  • 长虹 mt5520_ll:原厂设置栏、信号源菜单、面板背光(PR #1294)
  • 新的机型修正:neverFilterKeys(按一次方向键跳几格的电视,#115);bootStockMs 上限放到 45 秒(#1071)。这两项默认不生效,要用 ADB 写入

其他

  • 长按菜单不再超出屏幕,太长时可以滚动(#1097,PR #1282)
  • 我的视频当壁纸:控制中心里不再变黑,解码出错后重试同一部(#1251)

Aerial Lite 没有变化,仍是 1.20。

升级:控制中心「有新版本」→「下载并安装」,或再运行一次安装命令。

English

Home and boot

  • With an app or input set to open at power-on: if the stock launcher covers it, it opens again instead of leaving you on Aerial (#1229)
  • Xiaomi and other Android 6 TVs: the remote no longer goes dead after a cold boot while the guard asks what is in front (#1284)
  • Skyworth with Dangbei's launcher preinstalled (7S72 and others): Home returns to Aerial (#1297)
  • Dangbei boxes and others whose Home force-stops Aerial: Aerial opens as soon as its process is back, without waiting for the guard to bind (#1245)
  • Haier YunOS: the Blu-ray app the firmware opens at boot is sent back to Aerial; below Android 7 Aerial allows its own notification listener, so it comes back after a stop (#1301)
  • Redmi projectors (mt5873): the install script now installs the guard build, avoiding the boot hang with the standard build (#684; the hang itself is not fixed)

Device support

  • Changhong mt5520_ll: the maker's settings bar, input menu and panel backlight (PR #1294)
  • New device profile options: neverFilterKeys (TVs where one press of a direction key moves several places, #115) and bootStockMs up to 45 s (#1071). Both are off unless written over ADB

Other

  • The long-press menu stays on screen and scrolls when long (#1097, PR #1282)
  • Your own video as wallpaper: no black under Control Center, and a decoder error retries the same video (#1251)

Aerial Lite is unchanged, still 1.20.

Update: Control Center → "New version" → "Download and install", or run the install command again.

Don't miss a new aerial-tv release

NewReleases is sending notifications on new releases.