pengchujin/aerial-tv v1.82

Aerial 1.82

on GitHub

中文

开机和主页键

• 部分电视开机后桌面守护在解锁前崩溃、一直停在原桌面（红米投影仪 mt5873、峰米、海尔 YunOS 等，1.79 引入），已修复（#684 #1213 #1205）
• 小米：开机更快进入 Aerial（小米 MFTR0 从屏幕亮起到 Aerial 由 12–19 秒缩短到 7–10 秒）；开机广告页盖住 Aerial 时立刻拉回（PR #995）；「桌面」磁贴打开小米桌面后不再被马上拉回（#971，PR #1216）
• 创维酷开 Android 13（8R734 等）：按键没反应、反复无响应的问题（PR #1206）

音量和亮度

• 创维 8R145：按住音量键可以连续调（#1091）
• 创维 43H30：控制中心可以直接调背光（PR #1197）
• TCL G06：控制中心的图像设置入口能打开了（PR #1222）

流畅度

• 航拍壁纸不再整屏压暗，影片上移动焦点更顺；进屏保时磁贴淡出更省
• 安装脚本在 Android 9 及以上连同编译信息一起安装，装完即是编译好的
• Android 7–11 没编译时，由系统自己编译 Aerial，不用重装，也不弹框（#1202）
• 壁纸影片不再让 TCL 电视切到 120 Hz

玻璃效果

• 取不到影片画面的电视上（如部分 TCL），控制中心的玻璃改成更有层次的烟色
• 轮播自己上传的视频时，底板玻璃跟着每一段换（#1158）
• 修复小米航拍壁纸下磨砂玻璃消失
• 按返回进屏保时，焦点磁贴不再变成直角（#725 #654，PR #858）

Aerial Lite 1.18

• 换行时不再闪黑（#1118 #940）

工具

• restore.sh：Aerial 是唯一通知监听时也能完整还原（PR #1196）；report.sh：相邻的 IP 地址也会遮盖（PR #1198）；selftest.sh：电脑上没有 perl 时直接提示，不再误报失败

升级：控制中心「有新版本」→「下载并安装」，或再运行一次安装命令。

English

Boot and Home

• On some TVs the Home Guard crashed before the user was unlocked and the TV stayed on the stock launcher after boot (Redmi Projector mt5873, Formovie, Haier YunOS and others; since 1.79). Fixed (#684 #1213 #1205)
• Xiaomi: Aerial comes up sooner at power-on (MiTV-MFTR0: 7–10 s from screen on, was 12–19 s); taken back at once when the boot ad covers it (PR #995); the stock launcher tile is no longer pulled back right away (#971, PR #1216)
• Coocaa on Android 13 (Skyworth 8R734 and others): keys did nothing and the app kept freezing (PR #1206)

Volume and brightness

• Skyworth 8R145: holding a volume key keeps stepping (#1091)
• Skyworth 43H30: Control Center sets the panel backlight (PR #1197)
• TCL G06: Control Center's picture settings open (PR #1222)

Smoothness

• No full-screen shade over the aerial film, so moving focus over it is smoother; tiles fade into the screensaver more cheaply
• From Android 9 the install script installs with the APK's dex metadata, so Aerial is compiled as it installs
• On Android 7–11 an uncompiled Aerial has the system compile it in place, without a reinstall or a prompt (#1202)
• Wallpaper films no longer switch TCL TVs to 120 Hz

Glass

• On TVs where the film's frames cannot be read (some TCL), Control Center's glass is a richer smoke
• The owner's videos in turn: the plate's glass follows each one (#1158)
• Fixed the frosted glass missing over the aerial wallpaper on Xiaomi
• The focused tile no longer turns square going into the screensaver with Back (#725 #654, PR #858)

Aerial Lite 1.18

• No dark flash when moving between rows (#1118 #940)

Tools

• restore.sh restores fully when Aerial is the only notification listener (PR #1196); report.sh masks adjacent IP addresses (PR #1198); selftest.sh stops with a message when perl is missing instead of reporting a false failure

Update: Control Center → "New version" → "Download and install", or run the install command again.