这一版主要修兼容性和 bug。
屏保
- 图片壁纸 + 航拍屏保：图片和时钟接进屏保，航拍影片动起来后从图片淡入，不再先黑一下（#683）。
- 在 App 页里闲置进航拍屏保时，App 页的乳白玻璃跟着淡出，屏保不再是糊的。
- 系统屏保就是 Aerial、而电视的休眠时间比个性化里选的短时（酷开 C10 固定 60 秒，#732），按你选的时间进屏保，不再总是 45 秒。
- 系统屏保在息屏前先自己结束，放掉解码器（TCL tc8000 待机后唤不醒，#371）。
- 「4K 画布」不再自动打开：TCL MT9655 上实测没有变清楚，反而更卡（#607 #736）。想试的还可以用 ADB 强制打开。
桌面守护
- 按主页键后守护收不到任何窗口变化时，用使用情况统计确认前台，是原桌面就拉回 Aerial，并重启一次无障碍（小米盒子 5 Max 打开小米天气 / 米家后主页键失灵，#651）。
- 极米：按主页键后弹出极米的「选择桌面」框（看不见、遥控器没反应）时拉回 Aerial（#44）。
- Android 5：守护开着却没被系统列出（开机后要重装才好）时，让系统重新扫一遍（海信 VIDAA 5.1、创维 8S70，#578 #579）。
- 创维 E900V21F（移动高清盒子 6）的乐家桌面认作原桌面（PR #741）。
信号源和机型
- 小米电视 4（ANSM0）固件 22.11 起的 HDMI 编号（#584 #592）。
- Redmi X50（NSOP0）的 DTMB 打开的是数字电视，不再是模拟电视（#738）。
- 海信 VIDAA：从海信自己的服务读 HDMI，用广播切换（PR #430）。
- 极米：Z6X 第四代（XK03U）的 HDMI（PR #733）；信号源打不开时走设置服务的信号源页（PR #437）；亮度条直接调 DLP 光机档位（PR #434）。
其他
- 手机上传的照片按拍摄方向自动转正（#647，PR #729）。
- 家长密码设好后马上生效，Aerial 离开前台和进屏保时重新上锁（#718）。
- 安装命令：5555 端口连不上时引导 Android 11+ 的无线调试配对（PR #403）。
Aerial Lite 1.2（Android 4.0–4.4，测试版）：照片自动转正，家长密码同上。
已在小米 MiTV-MFTR0（Android 14，standard）和 TCL MT5879（Android 11，guard）上测过；部分机型的修复没有真机，只按报告人的数据改，欢迎在对应 issue 里反馈。
Mostly compatibility and bug fixes.
Screensaver
- Picture wallpaper with the aerial screensaver: the picture and clock carry into the screensaver and the film fades in over the picture once it moves, instead of cutting to black first (#683).
- Going idle on the apps page into the aerial screensaver: the apps page's milky glass fades with it, so the screensaver is no longer blurred.
- Where Aerial is the system screensaver and the TV's own sleep delay is shorter than the one chosen in Personalize (Coocaa C10 is fixed at 60 s, #732), the screensaver starts at your delay, not always at 45 s.
- The system screensaver ends itself as the screen goes off, letting the decoder go (TCL tc8000 would not wake from standby, #371).
- The 4K canvas no longer turns on by itself: on TCL MT9655 it was no sharper and slower (#607 #736). It can still be forced over ADB.
Home Guard
- After Home, if no window change reaches the guard, usage stats tell what is in front; if it is the stock launcher, Aerial comes back and accessibility is restarted once (Mi Box 5 Max after Xiaomi Weather / Mi Home, #651).
- XGIMI: its Home chooser coming up after Home (invisible, remote dead) brings Aerial back (#44).
- Android 5: when the guard is on but the system does not list it (fixed only by reinstalling), Aerial has the system read the services again (Hisense VIDAA 5.1, Skyworth 8S70, #578 #579).
- Skyworth E900V21F's LeJia launcher counts as the stock home (PR #741).
Inputs and devices
- Mi TV 4 (ANSM0) HDMI numbering from firmware 22.11 (#584 #592).
- Redmi X50 (NSOP0): DTMB opens digital TV, not analogue (#738).
- Hisense VIDAA: HDMI read from Hisense's own service and switched by broadcast (PR #430).
- XGIMI: Z6X Gen 4 (XK03U) HDMI (PR #733); the settings service's input page where passthrough will not open (PR #437); the brightness row steps the DLP light engine (PR #434).
Also
- Uploaded photos are turned upright by their EXIF orientation (#647, PR #729).
- The parental PIN holds as soon as it is set, and relocks when Aerial leaves the screen or the screensaver starts (#718).
- Install command: guides Android 11+ wireless-debugging pairing when port 5555 will not answer (PR #403).
Aerial Lite 1.2 (Android 4.0–4.4, beta): photos turned upright, parental PIN as above.
Tested on Xiaomi MiTV-MFTR0 (Android 14, standard) and TCL MT5879 (Android 11, guard). Some model fixes were made from reporters' data without the TV at hand; please report back in the issue.