Highlights in this release

RF24: Add delay after power-up (#1193)

Update #1184, RFM69 frequency band support for India

Improve transport function & debug messages (#1191)

Allow flash strings in present() to save RAM (#1198)

Important information:

• The NRF24 defines have been renamed to RF24 to use naming that's consistent with the other transport defines.
• ESP8266 board definitions 2.4.2 or later are REQUIRED for use with this release. If you use ESP8266 board definitions 2.4.1 or earlier you will get an error saying fatal error: gdb_hooks.h: No such file or directory #include "gdb_hooks.h"

Contributors

Special thanks to the following people who have contributed code to this release:

• freynder
• Jeeva Kandasamy
• Lee Nelson
• tekka
• Yveaux
• Marcelo Aquino
• Mikael Falkvidd
• Patrick Fallberg

Changelog

MySensors 2.3.1 release

f4fd69eb131cd5d by Mikael Falkvidd git@mjo.se at 2018-12-14 08:53:20

MQTT GW: Add INDICATION_GW_RX (#1228)

121648f34bb45ab by tekka at 2018-11-12 20:36:10

Update PubSubClient 2.7 (#1224)

4b14f5a7401e732 by tekka at 2018-11-11 14:06:37

Implement CPUTemperature() (#1225)

bde7dadca6c50d5 by tekka at 2018-11-04 12:27:28

Display release number (#1217)

06bdb991b6012c3 by tekka at 2018-11-03 09:04:32

MY_DEBUGDEVICE output (#1221)

4104cdbb980eb35 by tekka at 2018-10-23 21:26:16

Revert "Allow splash screen to redirect to MY_DEBUGDEVICE if defined (#1057) (#1210)" (#1220)

This reverts commit f5676a3.
d1805db3484e5e9 by tekka at 2018-10-23 19:38:13

Allow splash screen to redirect to MY_DEBUGDEVICE if defined (#1057) (#1210)

• Allow splash screen to redirect to MY_DEBUGDEVICE if defined (#1057)
  f5676a362207b89 by Lee Nelson at 2018-10-22 18:55:39

Code updates & harmonization (#1201)

8e8f44b40252e9d by tekka at 2018-10-21 14:55:24

Jenkins:Update Arduino 1.8.7 (#1215)

b6ab7aaf03354bf by tekka at 2018-10-21 11:10:21

Add GatewayESP32OTA example (#1216)

5a7f3a4faee19e1 by tekka at 2018-10-21 11:10:07

Fix internal message forwarding (#1205)

5d159a6c57209e9 by tekka at 2018-09-12 09:27:12

Allow flash strings in present() to save RAM (#1198)

b346214b1988a57 by tekka at 2018-09-04 07:00:38

Fix SPIDEV on Armbian Stretch (#1200)

Fix #1195
1c33609556e10b1 by Marcelo Aquino at 2018-09-04 06:59:32

Update Jenkins to use Arduino 1.8.6 (#1199)

0b51d5c1476086f by tekka at 2018-08-31 09:17:02

RF24: Add delay after power-up (#1193)

7214b0d4577ba9b by tekka at 2018-08-30 19:14:29

Nrf24 lowlevel (#1192)

• Implemented nRF24 constant carrier wave

For testing purposes only! Not used by regular MySensors stack.

• Please Jenkins for unused functions

• Add RPD retrieval
  966c5d70e12ba41 by Embedded Innovation at 2018-08-30 19:14:10

Inclusion mode: change pinmode to INPUT_PULLUP (#1197)

Issue 1196: #1196

According to arduino references we should instead use INPUT_PULLUP
as of Arduino 1.0.1
https://www.arduino.cc/en/Tutorial/DigitalPins
cff369679b96afb by freynder at 2018-08-30 19:13:44

Improve transport function & debug messages (#1191)

6d24ab1bb52ed44 by tekka at 2018-08-29 12:52:01

AVR: Fix variable scope in SHA256 ASM (#1188)

• AVR: Disable SHA256 ASM implementation

• AVR: Fix variable scope in SHA256 ASM
  ea7f7bec79573a5 by tekka at 2018-08-26 15:39:47

Add lowlevel nRF24 functions (#1190)

• Implemented nRF24 constant carrier wave

For testing purposes only! Not used by regular MySensors stack.

• Please Jenkins for unused functions
  5051d516dcb42cc by Embedded Innovation at 2018-08-26 15:38:46

RF24: Fix TX issue regarding PA+LNA modules (#1189)

46568ba14a6b6e6 by tekka at 2018-08-26 12:46:16

Code maintenance (#1186)

6ffe29cb5fcfa33 by tekka at 2018-08-22 18:50:16

Update #1184, RFM69 frequency band support for India (#1185)

c8d951d3df05a23 by Jeeva Kandasamy at 2018-08-21 17:31:10

Introduce CryptoHAL, optimize crypto functions (#1178)

2e406f51350f46c by tekka at 2018-08-21 17:30:11

Direct node2node traffic (#1174)

831e0e8cd232f7e by tekka at 2018-08-21 17:20:06

GW: Send discovery message after startup

4a94fcfd4fafaf7 by Olivier at 2018-08-15 12:32:08

Update library props and fix typo (#1173)

57e3294bcc82b8e by tekka at 2018-08-07 14:00:48

Add CPPFLAGS to configure output (#1168)

Printing the CPPFLAGS might help people notice when they are
not including all parameters on one line.
d0d0ee7e5ee6f30 by Mikael Falkvidd at 2018-08-06 17:15:47

ESP8266: Updates to support 2.4.2 board defs (#1169)

2badd59a71a096b by tekka at 2018-08-04 18:40:54

Prevent toggle ACTIVATE (#1164)

Fix issue #1163. Prevent toggling advanced features on nRF24L01 non-plus versions.
c6a970be8ba27ba by Embedded Innovation at 2018-07-30 11:14:36

Development version 2.3.1-alpha (#1154)

75538934955572c by Patrick Fallberg at 2018-06-25 07:21:45