0.1.0a38: Home Assistant finds a WiNet-S and a wallbox by itself, and a wallbox with its own address is its own device
- Discovery: an inverter behind a WiNet-S, and a Sungrow wallbox with a
network connection of its own, now show up under Settings → Devices &
Services as a Discovered card, with no search. Nothing is read from the
device until you press Add; it is then identified over Modbus as the
search does. Anything already set up is left as it is. An inverter on its
own LAN cable announces nothing and is still added with
Add integration → Search my network. - Wallbox: a wallbox with an address of its own is set up as an entry of
its own, the only one that writes to it; a wallbox read through a WiNet-S
stays read only. If you set Wallbox address in an inverter entry's
options, that option is gone with this release: add the wallbox with
Add integration → Search my network instead. An inverter entry that
also sees the same wallbox through its dongle now leaves it to the
wallbox's own entry, so one wallbox is one device. - Wallbox search: behind a WiNet-S the wallbox is also looked for at
units 2 and 4, where other installations report it, and only a Sungrow
wallbox is accepted there. - Diagnosis: a diagnosis now records what the device announces on the
network (its mDNS record, the name your router gives it and its network
card's maker), serial numbers replaced and no address published. This
tells us whether discovery can work for your setup; please run one. - Requires Home Assistant 2026.11 or later.