Release 0.1.0a19
- The survey now reads an iHomeManager into a document of its own. Turn on
its Modbus TCP first, in the iSolarCloud app: iHomeManager settings ->
Forwarding channel settings -> open port 502, 503 or 504. Nothing that
looks like a serial number is published. - The survey also reads a Sungrow Logger1000/3000/4000. If your inverter is
behind one, answer "a Logger" to the transport question so the Logger
itself is read too. - With a Sungrow SBR battery found on its own unit, the battery's power
limits now come from its datasheet instead of the BMS's current times
voltage. - The "Cut PV generation" switch is now offered on firmware P022 as well
as P023. - The control test no longer reports "nothing measurable happened" when
your own battery charge or discharge limit is set low: it tests under the
limit, or says the limit is why it skipped. - The wallbox shows its own serial number on its device page.
- First control test on an SH20T, thanks to Raik0 (#772), and a second
reading of an SH10RT-V112, thanks to Korsberg (#785).