Warning
If you experience immediate bluetooth pairing failures after updating, this likely indicates that you need to forget the bluetooth pairing and/or perform a full erase and flash.
🚀 What's Changed
- Support overriding GPS serial pins on all architectures by @Stary2001 in #8486
- Swap GPS pins for GPS TX/RX only for T114/T-Echo by @Xaositek in #8751
- Remove native from the build, and remove the required permissions by @NomDeTom in #8685
- Swap the GPS serial port pins. by @Quency-D in #8756
- More GPS pin flips for devices by @Xaositek in #8760
- Remove screen activation in powerExit function by @jp-bennett in #8779
- Add LOG_POWERFSM and LOG_INPUT debug macros by @jp-bennett in #8791
- Fix ifdef statement after ST7796 merge to resolve screen color issues by @Xaositek in #8796
- Update dorny/test-reporter action to v2.3.0 by @renovate[bot] in #8809
- InkHUD: Replace assert in UTF8 decoder to prevent unexpected reboot by @HarukiToreda in #8807
- Update meshtastic/device-ui digest to 3bf3322 by @renovate[bot] in #8814
- tryfix screen.cpp ifdefs by @jp-bennett in #8816
- Add WiFi Toggle to System frame to re-enable by @Xaositek in #8802
- #if defined conditions for WiFi by @jp-bennett in #8815
- Add initial support for Hackaday Communicator by @jp-bennett in #8771
- M5Stack UnitC6L - Enabled MQTT and WEBSERVER by default by @RikerZhu in #8679
- Initial Chatter 2.0 fix for baseUI by @HarukiToreda in #8615
- Make GPS_TX_PIN the serial TX and GPS_RX_PIN the serial RX for all NRF variants by @Stary2001 in #8772
- Update XPowersLib to v0.3.2 by @renovate[bot] in #8823
- RPM: Fix broken builds (bad backmerge) by @vidplace7 in #8787
- Flags and scripts for size reduction on NRF52 -> Currently targeting … by @thebentern in #8825
- Plain RAK4631 should not compile EInk and TFT display code by @thebentern in #8811
- Fix for high power drain after shutdown on Heltec T114. by @rbomze in #8800
- Bump release version by @github-actions[bot] in #8786
- Move everything from /arch to /variant by @jp-bennett in #8831
- Move device specific OCV curves to their respective device.h by @jp-bennett in #8834
- Add 'cleanup' to required PR labels by @jp-bennett in #8835
- Don't scale up the frequency of telemetry sending by @RCGV1 in #8664
- Update actions/stale action to v10.1.1 by @renovate[bot] in #8848
- Update alpine Docker tag to v3.23 by @renovate[bot] in #8853
- Promicro documentation update by @NomDeTom in #8864
- Optimization flags for all NRF52 targets to reduce code size by @Donix212 in #8854
- Update meshtastic/device-ui digest to 4fb5f24 by @renovate[bot] in #8862
- Update protobufs and classes by @github-actions[bot] in #8871
- promicro doesn't need limiting by @NomDeTom in #8873
- Enable USB_MODE to acknowledge RTS/DTR reset signal from esptool for heltec-v4 by @h3lix1 in #8881
- Fix #8883 (lora-Pager fter playing the notification, voltage does not disappear from the speaker) by @polarikus in #8884
- Resolve #8887 (T-LoRaPager Vibration on New Message Delivery) by @polarikus in #8888
- OnScreenKeyboard Improvement with Joystick and UpDown Encoder by @whywilson in #8379
- [T-LoraPager]Disable vibration if needed by @polarikus in #8895
- Tryfix: T3S3 ePaper eInk updates by @mverch67 in #8898
- Improved R1 Neo & muzi-base buzzer beeps for GPS on/off by @simon-muzi in #8870
- Meshtastic build manifest by @vidplace7 in #8248
- Fix backwards buttons on Thinknode-M1 by @jp-bennett in #8901
- Update protobuf name of FRIED_CHICKEN by @jp-bennett in #8903
- Guard 2M PHY mode for NimBLE by @thebentern in #8890
- Renovate: fix BH1750_WE by @vidplace7 in #8767
- Fixed the issue where T-Echo did not completely shut down peripherals… by @lewisxhe in #8524
- Fix apply device-install permissions by @vidplace7 in #8911
- Update platformio/espressif32 to v6.12.0 by @vidplace7 in #7697
- Fix #8915 [Bug]: Exception Decoder does not recognize the backtrace by @polarikus in #8917
- Actions: Fix release manifest formating by @vidplace7 in #8918
- ARCtastic runners by @vidplace7 in #8904
- Update peter-evans/create-pull-request action to v8 by @renovate[bot] in #8919
- PIO: Fix closedcube lib reference by @vidplace7 in #8920
- Use PSRAM to reduce heap usage percentage on ESP32 with PSRAM by @samm-git in #8891
- Create new screen colors for BaseUI by @Xaositek in #8921
- Enable Muzi-base LED notification by @jp-bennett in #8925
- Update System Frame for improved rendering on devices by @Xaositek in #8923
- Add I2C device check for seesaw device on native by @jp-bennett in #8927
- Use truncated position for smart position by @RCGV1 in #8906
- Properly turn off power pins at shutdown for m3 by @jp-bennett in #8935
- Update meshtastic/device-ui digest to 2746a1c by @renovate[bot] in #8936
- Use 'gh-action-runner' action for "Check" jobs. by @vidplace7 in #8938
- Optimize builds to reduce duplicate dependency checks by @vidplace7 in #8943
- Update actions/cache action to v5 by @renovate[bot] in #8944
- Fix #8899 [Bug]: [TloraPager] RotaryEncoder crash by @polarikus in #8933
- Mark implicit ACK for MQTT as MQTT transport by @GUVWAF in #8939
- Fix GPS Buffer full issue on NRF52480 (Seeed T1000E) by @fifieldt in #8956
- Actions: Compact manifest job output summary by @vidplace7 in #8957
- Add JSON packet recording option to native by @jp-bennett in #8930
- Implement Long Turbo preset by @thebentern in #8985
- Upgrade all esp32 targets to NimBLE 2.X by @thebentern in #9003
- Be more judicious about responding to want_response in existing meshes by @thebentern in #9014
- First position send validation by @thebentern in #9023
New Contributors
- @RikerZhu made their first contribution in #8679
- @rbomze made their first contribution in #8800
- @Donix212 made their first contribution in #8854
- @polarikus made their first contribution in #8884
- @phaseloop made their first contribution in #8858
- @samm-git made their first contribution in #8891
- @zeropt made their first contribution in #8678
Full Changelog: v2.7.16.a597230...v2.7.17.83c6161