mbillow/localthings v0.35.0

on GitHub

🚀 Highlights

• Two new languages. French and Brazilian Portuguese join the existing eight. The four actions (Start cooking and the three resource actions) can now be translated, and every language has them. Thanks to @3615nulsi and @eduardobittencourt! (#617, #694, from #686)
• More appliances over TCP 8888. The DV80M8214AW dryer, the NZ36K7570R cooktop, the NQ70M6650DS microwave/oven combo and the NW9300MD's oven cavities now set up. LocalThings now recognizes an 8888 appliance by the type it reports for itself, so a model nobody has mapped yet still reads in full. Thanks to @roweboat123, @antiremy and @korbijn! (#619, #675, #687, #690, #693, closes #636, closes #646)
• Paired range hood. The NZ30K7570RS's Bluetooth hood gets its fan, light and shutoff timer, all confirmed on hardware. Thanks to @antiremy! (#677, for #676)
• Switch off subdevices. Configure → Subdevices lets you untick a slot that isn't real hardware, like a blank cavity on some ovens and ranges. (#685)

✨ Added

• Ovens: a Reservoir sensor that shows whether the water reservoir is in or out. Thanks to @roweboat123! (#666)
• Ovens: cook time and temperature are entered in a number box instead of on a slider. Thanks to @roweboat123! (#688, #689)
• Ovens: the cavity state shows Ready, Preheat, Cooking and Finish, for "preheated" and "done" automations. Thanks to @BrawnyBravo! (#634)
• Dual Cook ovens (NV7B): the lower zone gets its own modes and is named "Lower oven". Start keeps working after a Wi-Fi board restart. (#620, for #597 and #600)
• Cooktops: the NZ36K7570R's timer shows minutes remaining, and burner ring size is translated. Thanks to @roweboat123! (#642)
• Heat pumps (MIM-H04EN): outdoor temperature, heat generated, booster heater and 3-way valve. (#687, for #682)
• Washers: names for 13 FlexWash WV9900M cycles. Thanks to @NadinMerali! (#672)
• Air Monitor Plus: a temperature sensor. (#684, closes #683)
• ARTIK051 air purifiers: Auto and Sleep are presets, so HomeKit can select them. (#684, closes #658)
• Microfiber filters get their own device type, with a Filter activity sensor. (#654, for #626)
• A "Last response" sensor shows when the appliance last answered. It's disabled by default. (#654, for #648)

🐛 Fixed

• Home Assistant 2026.12: following a new IP address, reauthenticating and reconfiguring reload the entry again. (#653, closes #647)
• A write the appliance accepted is no longer reported as unconfirmed when it answers with extra fields. Thanks to @roweboat123! (#663)
• NV51K7770S: changing the cook time during a cook works. Its Power is shown as a read-only sensor, since the switch never worked. Thanks to @roweboat123! (#662, #664)
• Air conditioners: setting the mode the unit is already in no longer fails. Thanks to @lucaponzanelli! (#623, closes #622)
• Air conditioners: the swing button no longer opens an empty menu, and 2-in-1 units find the wall unit's swing controls. Thanks to @blupine! (#638, #639)
• FAC_BORA air conditioners show unknown power in standby instead of 65,278 W. Thanks to @BrawnyBravo! (#628, closes #625)
• Frequent pushed updates no longer delay the regular poll, and an unload no longer leaves a connection open. Thanks to @BrawnyBravo! (#629, #630)
• 8888 appliances: one slow resource no longer fails the whole update. Thanks to @BrawnyBravo! (#632)
• Heat pumps (MIM-H04EN): power in kW is shown correctly, and there's one energy sensor instead of two. (#687, #692, for #682)
• A cooktop burner slot marked NotSupported no longer shows as a hot, active burner. (#653, for #621)
• A child lock with no reading shows unknown instead of locked or unlocked. (#654)
• Fewer incomplete-coverage notices: the NX58K7850SS and NX60T8311SS ranges, the Dacor DTI36P876BB cooktop and the MIM-H04EN heat pump. (#654, #684, #687, for #624, #621, #670, #682)
• An oven slot's description is no longer read as a washer model. (#684, for #681)

🔍 Upgrade notes

• read_resource, write_resource and observe_resource are admin-only, so non-admin users can no longer call them. Thanks to @BrawnyBravo! (#633)
• "Enable debug logging" now also captures the connection library's handshake and auth logs. Thanks to @BrawnyBravo! (#631)
• Oven cavity state values are now lower case (Preheat is preheat). Update automations that match the old text.
• NV51K7770S and NV51K777OS: the Power switch is replaced by a read-only Power sensor with a new entity ID.
• ARTIK051 purifiers: fan percentages map to Low, Medium and High only. Use fan.set_preset_mode for Auto and Sleep.
• Microfiber filters lose the washer entities they never used.
• NZ36K7570R: the duplicate countdown sensor is removed, and Paused and Flex coil code are disabled by default on new installs. After a reload, you can delete an empty hood device.
• MIM-H04EN: …_power_energy stops updating and can be deleted. …_energy keeps its history.
• DV80M8214AW: dryer controls are on, but not yet confirmed on hardware.
• NQ70M6650DS: the combo is read-only. Remote starts only load the cook at the panel.