mbillow/localthings v0.31.0 on GitHub

Setup finds the appliance when another OCF service shares its address. Some appliances, like the AF80F19D25WN floor unit, run a second, non-appliance service at the same IP, and setup connected to that one instead. Setup now finds the appliance itself, and reconnects to it after a port change. If Home Assistant can't reach it from another subnet, setup says so instead of reporting a refused certificate. (#562, closes #540, addresses #520)
Washer and dryer options. Extra rinse switch, Damp alert switch, a Wrinkle prevent active sensor, and seven more washer cycle names. Thanks to @sabaatworld! (#558, from #542)
AI Air Combo ventilator and AI Motion Wind. The AJ020FERPBC2 gets its ventilation and dehumidify modes, an Interlock switch and Away mode. The AR80H12CAAWNSK gets an AI Motion Wind select. (#555, closes #551, closes #554)

Dual-cavity ovens: a Divider sensor shows whether the divider is in. Thanks to @almulder! (#546)
Microwaves: a Lamp level select with Off, Low and High. Thanks to @almulder! (#545, via #556)
Dishwashers: Speed Booster switch and Wash zone select. (#544)
Names for every WF8900B and DV8900B cycle, extra spin speeds, Tap cold, gas dryers, and the upper/lower oven modes. Thanks to @almulder! (#547, #549)
Names for a flex crisper drawer's pantry zone options. Thanks to @almulder! (#548)

On a range with two ovens, each oven's controls follow that oven's own Smart Control. Before, the lower oven was blocked whenever the upper one's was off. (#560)
The Smart Dry select no longer appears on dishwashers that don't have it. (#544)

Upgrade notes:

On dual-cavity ovens, the lower oven's Cloud connected sensor is replaced by the Divider sensor, which reads the same field.
The DW5000C dishwasher loses its non-working Smart Dry select.
Washer cycle 57 is now "Delicates", and dryer cycle 33 is now "Steam Sanitize+".
Requires smartthings-local>=0.1.21, installed automatically.