letscontrolit/ESPEasy mega-20240822

on GitHub

Release mega-20240822

Note on updating nodes running 20240414 build.

Some ESPEasy nodes running a LittleFS build from 20240414 might be hard to OTA update.
This is due to a bug in Arduino code which has been fixed since where the timeout for HTTP transfers was too short.
Especially the larger builds like 8M or 16M "Max" builds might be hard to update via OTA.

Changes in mega-20240822 (since mega-20240414):

Gijs Noorlander (11):

• [Cleanup] Revert accidentally changed line endings
• [PluginStats] Show average rate and total duration of collected stats
• [PluginStats] Add nr of samples to chart legend
• [PluginStats] Uncrustify/cleanup code
• [Build] Fix build due to static var with too generic name
• [Docs] Remove unused files for P169
• [Docs] Document getconfig and commands for P169 AS3935
• [AS3935] Fix restart measurement after running calibration command
• [PluginStats] Fix patching timestamps from before system time was set
• [AS3935] Enable auto gain and reduce number of events
• [Sonoff POR] Move Sonoff POW R1/R2 ESP8266 build back to core 2.7.4

TD-er (140):

• [IPv6] Add option to enable/disable IPv6
• [AdaGFX Helper] Make "1" in TomThumb font as wide as all other numbers
• [NeoPixel] Add AHT20 support to ESP32 NeoPixel build.
• [NeoPixel Matrix] Fix trailing pixels on scrolling text
• [Hidden SSID] Fix ESP32 connecting to hidden SSID with channel > 11
• [ESP-IDF5.1] Update to latest SDK code + fix HWCDC
• [ESP32 WiFi] Add info about found AP from scan
• [ESPEasy p2p] Add p2pNode#Connected and #Disconnected events
• [Build] Fix build on ESP-IDF4.4 builds
• [C018] Reduce build size
• [Build] Reduce ESP8266 build size by concat all in single __tmpfile.cpp
• [Build] Reduce ESP8266 bin size disable LittleFS lib + OTA on 1M builds
• [AS3935] Add P169 Lightning Detector plugin
• [AS3935] Improve calibration accuracy
• [AS3935] Implement P169 code
• [AS3935] Add option to measure all calibrated oscillators
• [AS3935] Improve frequency measurement accuracy
• [AS3935] Improve stability and calibration success rate
• [AS3935] Make it compile for ESP8266 and clarify logs
• [AS3935] Fix build on ESP32 IDF4.4
• [AS3935MI] Get in sync with pending PR to original lib
• [AS3935MI] Move frequency count code to original library code
• [AS3935MI] Make frequency count "vanilla Arduino" for non-ESP SoC
• [AS3935MI] Add selection for nr Samples, division, etc
• [AS3935MI] Add '2nd best' check to calibration to retest
• [AS3935MI] Add event on lightning strike and count strikes per interval
• [AS3935MI] Add total strikes counter, sensor stats and cleanup plugin
• [AS3935MI] Cleanup settings & add chart to help tuning
• [AS3935MI] Speedup LCO calibration + simplify configuration
• [AS3935MI] Add timestamp to PluginStats
• [AS3935] Fix compile issue
• [ESP-IDF5.1] Update ESP-IDF SDK to fix HWCDC
• [AS3935MI] Change lib function names to use camelCase
• [ESP-IDF5.1] Fix crashes on LittleFS after factory reset
• [ESP-IDF5.1] Fix crashes on LittleFS after factory reset
• [ESP-IDF5.1] Update to latest ESP-IDF SDK code
• [ESP-IDF 5.1] Exclude some OPI PSRAM speed improvements due to stability
• [Json] Fix showing JSON including pluginstats data
• [PluginStats] Compute average taking timestamps into account.
• [PluginStats] Move stats to PSRAM when available
• [AS3935MI] Rename interrupt enum to match style of other enums in lib
• [Controller] Fail gracefully when almost out of memory
• [Controller] Fail gracefully when almost out of memory
• [ESP-IDF5.1] Fix WiFi issues on ESP32-C6
• [AS3935] Minor clean-up in code and user-interface
• [P169] Start documenting AS3935 plugin
• [ESP-IDF5.1] Fix WiFi issues on ESP32-C6
• [AS3935MI] Get rid of 'magic' values in lib code
• [AS3935] Fix "indoor/outdoor" setting + no longer disable on fail calib
• [AS3935] Document calibration for P169 Lightning sensor
• [AS3935] Add commands to P169 Lightning Detector
• [AS3935] Set task values to output distance Far/Near and remove "energy"
• [ESP-IDF5.1] update to latest ESP-IDF SDK & Arduino 3.0.0
• [mDNS] Enable FEATURE_MDNS again for ESP-IDF5.1 builds
• [AS3935MI] Add validation check for computeCalibratedFrequency
• [AS3935MI] Make ISR attributes like IRAM_ATTR platform dependant.
• [AS3935MI] Add auto gain algorithm to adapt to changes in noise envs.
• [PluginStats] Update recorded timestamps when time is first set
• [AS3935] Improve auto tuning
• [mDNS] Disable mDNS again as it causes major stalls
• [Charts] Add option to zoom/pan for PluginStats charts
• [ESP-IDF5.x] Fix recent change of flush() to clear() in Arduino SDK
• Revert "[ESP-IDF5.x] Fix recent change of flush() to clear() in Arduino SDK"
• [ESP-IDF5.1] Revert Arduino PR 9453 WiFiClient - rename flush() to clear()
• [ESP-IDF5.1] Update to latest platform build
• [AS3935] Disable auto gain for now
• [ESP-IDF5.1] Revert Arduino PR 9453 WiFiClient - rename flush() to clear()
• [Build] Fix merge issues.
• [AS3935MI] Update to 1.3.5 with PRs from ESPEasy changes merged to lib
• [System Load] Reduce system load running background tasks
• [Cleanup] Speedup converting task values to String
• [Cleanup] Speedup converting task values to String
• [Cleanup] Further reduction of load
• [Cleanup] Further reduction of load
• [Cleanup] Revert line ending to CRLF again (.h files)
• [Cleanup] Revert changed line-ending back to CRLF (.cpp)
• [Cleanup] Revert line endings from LF to CRLF
• [Cleanup] Revert line endings from LF to CRLF
• [Cleanup] Revert line ending to CRLF for PlatformIO ini files
• [AS3935MI] Update increase/decrease functions return values in lib
• [PluginStats] Decimate samples by not storing unchanged values
• [AS3935] Add selectable range for auto gain algorithm
• [Build] Remove previously created __tmpfile.cpp files on ESP8266 build
• [AS3935] Add check to see if RCO is still active on IRQ pin
• [ESP-IDF5.x] Update to latest code incl. possible fix for WiFi issues
• [Controller] Fix sending to controller
• [Controller] Fix sending to controller
• [Cleanup] Speedup all calls where task value name was used
• [Build] Fix build error on LIMIT_BUILD_SIZE builds
• [ESP-IDF5.x] Update ESP-IDF/ESP32-Arduino to latest commits
• [ESPEasy p2p] Improve sharing tasks via p2p + add checksum to UDP packet
• [ESPEasy p2p] Add timestamp to taskvalue data to counter network delays
• [ESPEasy p2p] Fix sending taskinfo packet rejected by wrong size check
• [ESPEasy p2p] Make taskinfo length more flexible, remove trailing zeroes
• [ESPEasy p2p] Add "Data Source" selection to request remote data feed
• [Cleanup] Remove unused code
• [MQTT] Fix some extreme timeouts when broker is unresponsive (#5075)
• [MQTT] Send keep-alive ping at 2/3rd of MQTT_KEEPALIVE
• [MQTT] Set timeout also for connecting to the MQTT broker
• [Memory] Make special memory allocations more robust
• [Controller] Add time spent in connecting to host to timing stats
• [Cleanup] Rename ambiguously controller_number in controller code
• [Controller] Add note on typical timeout for local vs. online networks
• [PluginStats] Fix inconsistency with pluginstats for ADC plugin
• [MQTT] Fix disconnect when broker sends keepalive ping before client
• [ADC] Improve ADC curve fitting calibration accuracy
• [VL53L0X] Fix ignoring sensor error values
• [VL53L0X] Add async read option to library
• [ESP-IDF5.x] Update to latest ESP-IDF/Arduino SDK
• [WiFi] Add passive/active scan for ESP32
• [Cleanup] Always use the same unit/note for settings, regardless the page
• [ESP-IDF5.1] No longer support Ethernet on ESP32-C2
• [Sysinfo] Add internal temperature to sysinfo (when supported)
• [Build] Fix build due to missing #ifdef checks
• [ESP32 temp] Fix int. temperature sensor not changing range
• [WiFi] Fix WiFi not able to reconnect due to unprocessed disconnect
• [VL53L0x] Make reading sensor async
• [VL53L0X] Actually do read the sensor asynchronous.
• [WiFi] Fix (re)connect to WiFi on ESP32-xx builds
• [VL53L0X] Add filtering + make threshold more intuitive
• [AS3935] Do not set IRQ pin to input when not configured (e.g. p2p share)
• [Time] Simplify system time management + increase resolution to usec
• [Time] Cleanup ESPEasy internal system time management
• [VL53L0X] Cleanup code
• [VL53L0X] Add dynamic filtering, allowing fast response on quick change
• [Time] Improve NTP accuracy and prevent lockups on incorrect data
• [Cleanup] Fix wrong unit for TX power on web UI page
• [Time] Improve accuracy and precision of time sync
• [GPS] Fix filtering out occasional jitter in received GPS timestamp
• [ESP-IDF5.1] Fix hanging when OTA update fails.
• [GPS] Fix showing GPS received time on GPS task page
• [P2P] Fix crashes when processing UDP packets after WiFi disconnect
• [ADC] Change order of mV and ADC value as this is more intuitive
• [OTA] Fix crash/abort of larger OTA updates (e.g. Max builds)
• [GPS] Improve GPS time stability
• [Timesync] Tweak time wander penalty for time since last sync
• [CUL reader] Set nr. filters field to actual nr of used filters via cmd
• [CUL reader] Do not sort CUL filters
• [Readme] Added link to PVS-Studio as used SAST tool
• automatically updated release notes for mega-20240822

Ton Huisman (280):

• [P123] Add FT6206 Capacitive touch screen
• [AdaGFX] Implement/activate generic 'adagfx_trigger' command-trigger
• [P123] Add arguments to Object events, allow initial events for On/Off button objects minor corrections
• [P123] Code improvements, increased button response
• [AdaGFX] Add support for btn subcommand to draw button-like objects
• [P123] Add support for button-simulation using AdaGFX btn subcommand
• [Build] Add -Wswitch compiler option for ESP32 (already active for ESP8266)
• [P123] Minor updates and improvements
• [P123] Limit code & bin size for LIMIT_BUILD_SIZE builds
• [AdaGFX] Improve btn subcommand, slim down bin size, other minor improvements
• [TouchHandler] Introduce ESPEasy_TouchHandler, refactored out of P123 touch support
• [P123] Refactor and implement ESPEasy_TouchHandler
• [TouchHandler] Fix conditional compilation issue
• [AdaGFX] Add support for confined windows to print/draw in [AdaGFX] Add support for getting config values
• [P095] [CP] Fix for displaying text on previous location was not overwriting old content Add Text print mode for centered text Extend txtfull subcommand to enable centered text
• [TouchHandler] Move PLUGIN_WRITE and _GET_CONFIG_VALUE to helper, add getters for state and enabled, add toggle subcommand, handle multiple objects for on, off and toggle
• [P123] Refactor PLUGIN_WRITE and _GET_CONFIG_VALUE to TouchHandler, minor improvements
• [AdaGFX] Remove unused variable
• [AdaGFX] Process like template for length and textheight values
• [AdaGFX] Add/update documentation for window commands and config values
• [AdaGFX] Code improvements, initialization, const, move window offset into printText()
• [AdaGFX] Code improvements as suggested by feedback
• [AdaGFX] Correct font include paths, add #ifndef filename checks to fonts
• [AdaGFX] Regression: Background-fill for text should fill entire line height
• [TouchHandler] Change method arguments to const-by-reference where possible
• [TouchHandler] Strip unneeded prefix from page variables
• [P123] Strip unneeded prefix from page variables
• [TouchHandler] Optimizations (as suggested and more)
• [P123] Fix some spelling issues, code optimizations
• [P123] Minor optimizations
• [AdaGFX] Reduce build some more for LIMIT_BUILD_SIZE
• [P123] Small size improvement
• [TouchHandler] Replace _ in captions and object names by a space, and reverse, might save some settings size
• [UI] Add class table.multi2row for alternating color per 2 rows
• [TouchHandler] Use 2-row alternating color, improvements
• [P123] Code improvements
• [AdaGFX] Add Slider/Gauge support (via btn subcommand), fixes
• [AdaGFX] Missed a conditional compile option
• [TouchHandler] Add support for sliders and swiping, many other improvements
• [P123] Implement Slider/Gauge support, other (size) improvements
• [AdaGFX] Improved drawing of Slider/Gauge control (also reverted)
• [TouchHandler] Enable use of reverted sliders/gauges, and improved handling of ranges that don't have 0 included
• [P123] Minor code improvements
• [TouchHandler] Add optional touchscreen disabling, code fixes and improvements
• [P123] Implement disabled-touchscreen feature
• [TouchHandler] Fix typo and conditional compilation issue
• [UI] Improvements for multi2row style
• [TouchHandler] Settings page layout adjusted, and some minor improvements
• [TouchHandler] Logging check improvements
• [P123] Logging check improvements
• [TouchHandler] Remove unneeded enum MAX values
• [AdaGFX] Remove unneeded enum MAX values, fix BMP conditional compilation issue
• [AdaGFX] Fix compilation error after merge from mega
• [TouchHandler] Fix compilation error after merge from mega, table improvements
• [P116] Add GetConfig feature, code improvements
• [I2C scanner] Enable plugin-scan for ESP32, updated sensors
• [TouchHandler] Fix touch-disabled option, code improvements
• [P123] Code improvements
• [TouchHandler] Conditional compilation fix
• [TouchHandler] Conditional compilation fix
• [Boards] Add BOARD_HAS_PSRAM flag for 16M8M config (avoids crashing when saving P123 settings)
• [TouchHandler] Logging and code optimizations
• [P123] Bugfixes and logging improvements
• [P123] Fix for disabled touchpanel setting
• [Lib FT6206] Add support for FT6336 touch panel (as used in M5Stack Core2)
• [P123] Correct merge error
• [P123] De-initialize on error during PLUGIN_INIT fixed
• [Core] Add extra storage space for Custom TaskSettings
• [Plugins] Adjust check for max. CustomTaskSettings
• [TouchHandler][P123] Implement Extended CustomTaskSettings feature
• [P104] Improve storing settings (speed and size)
• [TAR] Add support for downloading and uploading files via .tar archive
• [Core] ExtendedCustomTaskSettings code improvements based on feedback
• [Code] Add NR_ELEMENTS macro for getting the number of elements in an array
• [TAR] Code improvements from feedback, code de-duplication
• [Download] Only add exrcfgNN.dat files with feature enabled
• [TAR] Don't allow subdirectory files, check file before trying to delete
• [TAR] Add setting to disable download configuration as a .tar file
• [TAR] Add documentation
• [TAR] Minimal logging during file-download
• [TAR] Minimal logging during file-upload, code improvements
• [Core] Re-enable Flash-formatting for LittleFS
• [P123][TouchHandler] Fix merge issues, adjust log strings
• [TouchHandler] Fix typo
• [P123][TouchHandler] Fix valuecount issue, implement missing GET_I2C_ADDRESS function
• [TouchHandler] Remove unused variable assignment
• [P104] Disable new settings-version V3 for now
• [P104] Code improvements, re-enable new settings-version V3
• [AdaGFX_helper] Reduce build-size
• [AdaGFX_helper] Simplify font handling, add some better 7/14 segment fonts, enable 18pt fonts for ESP32
• Merge branch 'mega' of https://github.com/letscontrolit/ESPEasy into feature/TAR-archive-upload-and-download + fixes
• [AdaGFX_helper] Update Fonts documentation
• [TAR] Scrape off a few bytes to make the build fit
• [TouchHandler] Fix compilation errors since Core code changes
• [TouchHandler] Fix compilation errors since Core code changes
• [TouchHandler] Code optimization reducing .bin size
• [P123] Minor code optimiziations
• [Build] Reduce code size to make Collection F fit again
• [Build] Reduce code size to make Collection F fit again (Collection plugins)
• [TAR] Exclude feature from normal_IRext_no_rx build for size overflow
• [TAR] Exclude feature from normal_IRext_no_rx build for size overflow (commit correct file)
• [Build] Reduce code size to make Collection F fit again (Collection plugins)
• [Build] Reduce code size (Stable plugins)
• [P045] Don't use UserVar.setInt32() for Collection builds
• [Build] Reduce code size (Stable plugins)
• [Build] Reduce code size (Stable plugins)
• [Build] Reduce code size (Stable plugins)
• [Build] Reduce code size (Collection A plugins)
• [Build] Reduce code size (Collection B plugins)
• [Build] Reduce code size (Collection C plugins)
• [Build] Reduce code size (Collection D plugins)
• [TAR] Correctly handle a 0-byte file on download
• [TAR] Improve Tools/Save description, add Reboot button on Tools/Load, update documentation
• [Build] Reduce code size (Collection E plugins)
• [Core] String optimizations
• [Core] String optimizations
• [Core] String optimizations
• [Core] String optimizations
• [Lib] LD2410 Optimize code to reduce bin size
• [Build] Reduce code size (Collection G plugins)
• [Build] Reduce code size (Energy plugins)
• [Build] Reduce code size (Display plugins)
• [Build] Reduce code size (Controller helper)
• [AdaGFX_helper] Code improvements Partly based on this commit: a95ad3b
• [Build] Reduce code size (avoid String(F("...")) conversions and concatenations)
• [Build] Revert modifications for Eth- and WiFi- event handlers (too timing critical)
• [TouchHandler] Also reverse the Left/Right navigation when Up/Down navigation is reversed
• [TouchHandler] Rename inc/dec subcommands to next/prev
• [P123] Refactor increment/decrement functions to next/prev in line with TouchHandler
• [P123][TouchHandler] Add documentation
• [Build] Code reductions to make Collection F build fit in .bin size again
• [P145] Revert moved include
• [P123] Docs minor corrections
• [P011] Add Input (switch) option, code improvements
• [P011] Add documentation
• [P064] Add Separate Gesture events option
• [P064] Updated documentation
• [TAR] Re-enable TAR support in ESP8266 Display build
• [Docs] Improvements and missing features
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [Storage] Use correct parameter-type for strformat()
• [P047] Add support for Adafruit I2C Capacitive Moisture sensor
• [P047] Update documentation for added sensor model
• [N001] Add support for optional Subject to notify command
• [P162] Add plugin for Digipot MCP42xxx/MCP41xxx
• [P162] Add required include
• [P011] Update documentation
• [P011] Add support for Get Config Values and update documentation
• [P011] Add plugin commands to EasyColorCode
• [P162] Fix some testfindings, add logging
• [P162] Add Send data on change option
• [P162] Add documentation
• [P162] Add EasyColorCode configuration
• [AdaGFX Helper] Add TomThumb 3x5 font
• [Build] Add ESP32-S3 4MB NeoPixel LittleFS build, including AHT2x (P105) for TinyTronics Smart Home display unit
• [Build] ESP32-S3 4MB NeoPixel LittleFS build, remove typo, no longer needed here
• [AdaGFX] Add Default font option and support functions
• [P131] Add default font selector
• [P131] Update documentation
• [Docs] Hide default enabled sidebar menu
• [P167] Enable use of SEN5x sensor, other improvements
• [SysVars] Add conversions to get remote-unit info
• [SysVars] Add more conversions to get remote-unit info
• [Build] Remove P039 from normal_IR_no_rx_ESP8266 build to make it fit again
• [P167] Minor corrections and some cleanup
• [SysVars] Update EasyColorCode with new variables and some fixes
• [P167] Add to I2C Scanner
• [P167] Update EasyColorCode docs
• [P110] VL53L0x: Add Direction value, trigger only when changed, trigger delta
• [P113] VL53L1x: Add Direction value, code optimizations
• [P110] Update documentation
• [P113] Update documentation
• [Bugfix][P135] SCD4x fix reading sensor settings
• [P135] Only set sensor parameters if needed
• [P135] Only set sensor parameters if needed
• [P105] Update plugin name and documentation
• [Commands] Correctly handle on/true/off/false as enable/disable values for commands
• [P105] Update documentation
• [P034] Add documentation, remove unreachable documentation file
• [P012] Clear splash after 5 seconds if not yet overwritten (man. picked from #4884)
• [C018] Re-enable LoRa TTN controller for ESP32 Collection builds
• [P105] Add extra devices to I2C scanner
• [P167] Fix storing setting to enable tech. logging
• [Build] Update espeasy.min.js for multiple merged PRs
• [P167] Use fixed label for model and tech. logging
• [AdaGFX_Helper] Fix typo in default font definition
• [P116] Add Default font selection if AdafruitGFX_Helper fonts are included in build
• [Docs] Add plugin overview per build set (generated)
• [P167] Add command sen5x,techlog,<0|1>
• [P167] Add command sen5x,techlog,<0|1>
• [P167] Add documentation
• [C011] Documentation correction
• [AdaGFX_Helper] Fix typo in default font definition
• [AdaGFX_Helper] Fix merge conflict
• [AdaGFX_Helper] Fix font offset issues
• [P047] Add support for BeFlE v3.x moisture sensor
• [P080] Add Event with iButton address
• [DallasHelper] Reduce logging for Dallas_readiButton to on-change only
• [P080] Remove unneeded Dallas_startConversion calls, reduce logging for Dallas_readiButton call
• [P080] Improved documentation
• [P004] Add support for Get Config Value to retrieve sensor statistics
• [Commands] Add OWScan command to scan for 1-wire devices
• [P004] Correct typo
• [P004] Change argument separator to dot for Get Config Value
• [1WireHelper] Return Unknown for unrecognized devices
• [P168] Add VEML6030/VEML7700 Light/Lux sensor
• [AdaGFX Helper] Parse Get Config Values with period instead of comma, with fall-back
• [AdaGFX Helper] Update documentation
• [P011] Parse Get Config Values with period instead of comma, with fall-back
• [P087] Parse Get Config Values with period instead of comma, with fall-back
• [Build] Fix build error because of removed python package since 3.12
• [Build] Fix build error because of removed python package since 3.12
• [P168] Add documentation
• [P170] Add Seeed studio I2C Liquid Level sensor
• [Build] Set ETH enabled for all IDF 5.1 builds
• [P167] Correct interrupt function definitions
• [P170] Add documentation
• [P170] Add optional logging of received data
• [P123] Add support for GT911, CST820, CST226 and AXS15231 touch screens
• [P123] Update documentation
• [P123] Fix support for CST226 to return 0 when not touched
• [P123] Update documentation
• [P123] Add support for CHSC5816 and update documentation
• [Commands] i2cscanner: add debug and multiplexer support
• [P123] Save current device I2C address
• [P123] Docs: add warning about CST816 can't be found by I2C scan
• [P142] Add AS5600 Magnetic angle sensor
• [P168] Fix VEML6030 support
• [Build] Add P095 to Collection builds (ESP32 only) as documented
• [P047] Fix compiler warning
• [P095] Add support for ILI9488 Displays
• [StringConverter] Fix parseHexTextData unwanted increment during parsing
• [P123] Docs: add remark for untested touchscreen controllers
• [P172] Add BMP3xx using SPI interface
• [P142] Add documentation
• [P095] Combine support for ILI9486 Displays with ILI9488
• [P095] Combine support for ILI9486 Displays with ILI9488
• [P095] Update documentation
• [P095] Documentation note for ILI9486 added
• [Docs] Documentation updates, README.md updates
• [P172] Show ChipID when plugin is enabled
• [P172] Add/update documentation
• [P036] Add Header Time format options
• [P087] Add example to plugin documentation
• [P027] Add optional Powerdown mode
• [P027] Fix sending single values via Controller
• [P003] Countertype to determine the number of values
• [P003] Update documentation, apply some corrections
• [P003] Add extra Counter Type options (for selected builds)
• [P003] Add extra setting for Ignore Delta = 0
• [P003] Fix typo
• [Build] Remove P094 from ESP8266 Collection D for size reasons
• [Build] Remove P094 also from ESP32 Collection D builds
• [P003] Allow Interval = 0 and send first read 0 Count value
• [Commands] Rename Reset to FactoryReset
• [Console] Exclude Serial Console fall-back GPIOs only when fall-back enabled
• [P003] Improve handling and checking for new pulses when Interval = 0
• [P141] Add default font selection setting
• [P011] Exclude plugin from 1M builds
• [P036] Exclude preview from web-UI for 1M builds
• [P123] Missing parenthesis in macro
• [P164] Missing parenthesis in macros
• [TarStream] Add missing fall-through comment in switch
• [P038] Reduce build size
• [P135] Exclude factoryreset command by default
• [P008] Small code optimizations
• [P013] Log-string optimizations
• [P023] Disable Content-display in web-UI for limited builds (code size reductions)
• [P024] Fix issue with reporting/displaying the configured I2C address (offset via Port)
• [P104] Fix unused variable warnings
• [Docs] Corrections for P009 and P019 pin range commands
• [P038] Add commands neopixelfor and neopixelforhsv
• [P038] Add optional <clear> argument to neopixelfor commands
• [P038] Fix optional <clear> argument for neopixelforhsv command

andibaciu (2):

• Plugin P167 IKEA Vindstyrka
• Fix some bugs and add suport (only read parameters) for standalone sensirion sen54 and sen55

thomastech (10):

• Preliminary Notify Plugin Changes to restore operation after ISP email server upgrade
• Added more comments to file. No code change.
• Changed Notify SMTP email timeout values to mS (were secs), per TD-er's request.
• Cleanup Notify log text messages.
• (1) Reduced Notify Timeout Limit to 12000mS. (2) Fixed "Reply to" address when provided by Notify Command (via rules).
• Reverted Notify Max Timeout to 20000mS (was 12000). Notify Log msgs now employ loglevelActiveFor() wrapper.
• Created Docs (RTD) for updated Notifications Email plugin.
• Corrected Changelog dates in NotificationPage.cpp.
• (1) RTD text corrections, per discussions. (2) Updated RTD link, now use addRTDHelpButton() function.
• Minor edits to Notification Docs, per Github comments