github kalkman-code/beamer v1.4.0
Beamer 1.4.0

latest releases: v1.5.19, v1.5.18, v1.5.17...
one month ago

One keyboard and mouse or trackpad for a Mac and a Windows PC over the local network, in either direction. Push the pointer off the shared edge and it carries on onto the other machine, or double-tap the trigger key (Right Option on the Mac, Right Ctrl on the PC). The clipboard follows. Traffic between the two stays on your network, encrypted and authenticated; pairing is a six-digit code.

Install 1.4.0 over any earlier version; your pairing and settings stay as they are.

Downloads

  • macOS 13 or later, Apple silicon: Beamer-1.4.0.dmg, signed with a Developer ID and notarised by Apple. Intel Macs are not supported.
  • Windows 10 and 11, 64-bit: Beamer-Setup-1.4.0.exe, or winget install KalkmanCode.Beamer once the winget listing is approved.

The Windows installer is not code-signed, so Windows shows "Windows protected your PC" the first time. Choose More info, then Run anyway. Everything in it is built from this repository.

In this release

  • Nine new ways for a crossing to look. Beside Glow and Beam there are three families, Membrane, Sparks and Instrument, with three effects each and three colour packs of their own, and any colour works with any effect. On the Design page, Show at draws every style's tile, Glow and Beam included, at the edge, in a corner or, on the Mac, at the notch, each playing while you point at it, with the chosen style's name and what it does beneath; choosing Glow or Beam no longer hides or greys out the rest of the page. An effect plays on the display the pointer is on, and nowhere else.
  • How long it plays. Length on the Design page, Short, Normal or Long, sets how long a crossing's animation runs after the push: the landing, the arrival, and Glow and Beam's flash. The push itself still follows your hand.
  • Glow and Beam in a corner. A push into a corner now lights that corner, along both walls and brightest where they meet, on both machines; on the Mac the top arm lights the menu bar.
  • See where the pointer lands. A switch by the shortcut, a menu or a direction switch now plays an arrival around the pointer on the machine that takes over, so you never have to hunt for it. Choose what it plays under Show where the pointer lands on the Design page, or turn it off.
  • Part of the edge. A new way in that crosses only along the thirds of the edge you pick: the middle of a long monitor, say, leaving the ends free for scroll bars and window edges. Glow and Beam fade out at the ends of each third.
  • Pairing on Overview, and by address. Both Overview pages now lead with pairing until it is done, so there is no separate page to find. When the PC never appears in the Mac's list, as across a VPN or on another subnet, type the address the PC shows next to its code into "PC not listed?" on the Mac and press Find. The PC joins the list, and you pair with the code as usual. No token to copy by hand any more.
  • Update check. When it starts, and once a day after that, Beamer asks GitHub whether a newer version is out. When one is, the menu says Beamer X is available and Overview offers a Download button that opens the release. It downloads nothing itself, and nothing is sent but the request. Drafts and pre-releases never count. Turn it off with Check for updates on Overview.
  • A clearer first run. The Mac download opens on a window that says to drag Beamer to Applications. On Windows, Beamer adds its firewall rules before it listens, so Windows no longer asks first and no longer offers to open Beamer on public networks, and the firewall check sits at the top of the Connection page rather than on a page of its own.
  • Settings, page by page. Both windows were gone through for sense and ease of use: pages in the order you set things up, rows that cannot apply hidden rather than greyed out, clearer names ("Same shortcuts" and "Same positions", "Where the PC is", Outline for the notch style that was Beam), a drawing of your arrangement on the Crossing page that lights up where each way crosses, short animations that show what each change did, and Design page previews that play when you point at them. They are instant with Reduce Motion or animation effects off.
  • Light mode. Both settings windows now come in light as well as dark. Choose System, Light or Dark under Appearance on the Design page; with System, the window follows your machine's setting as it changes.
  • Monitor layouts. On a MacBook under a wider external display, the edge of the display that stops short can now be pushed through, and arrivals land on the right display when monitors are stacked or staggered. Before, the lower of two stacked monitors could not be reached.
  • The clipboard only crosses when it has changed. Before, every switch re-sent it, up to an 8MB image, before the pointer moved.
  • Pointer and scroll speed. Each machine's Keyboard page sets how the other machine's pointer moves and scrolls on it, from 25% to 400%, with a switch to reverse its scrolling. Before, the PC's pointer speed on the Mac, and the Mac's on the PC, depended on the other machine's own settings.
  • A PC whose address changed. When the router hands the PC a new address, the Mac finds it again and carries on, where before it said Windows was unreachable until you paired again.
  • Trackpad ticks. The breakthrough is now a double tick, and Try it on the Design page plays the moment you press, as macOS plays nothing without a finger on the trackpad. The Light, Medium and Firm choice is gone: macOS gives apps no haptic strength, so it never changed anything.
  • Hide addresses on both Connection pages hides every IP and hardware address Beamer shows.
  • Open log folder in the Mac's menu and the Windows tray, for attaching logs to a bug report.
  • Less work when idle. The Mac no longer redraws its settings window while it is closed, and nothing on the Design page animates until you point at it.

Fixed

  • On Windows, crossing effects and the glow now draw over the taskbar. A push into a bottom corner, or out through the bottom edge, drew under it.
  • Pause crossing and a full-screen app now also stop the other machine's pointer coming home through the edge you are leaning on.
  • The way home through an edge follows that machine's own Crossing page, so the thirds you pick and Corner apply to the other machine's pointer too.
  • With only the notch on, the PC's pointer now comes home through the notch, not anywhere along the top edge.
  • A change on the Crossing page now applies to the other machine's pointer straight away, not after crossing out and back.
  • When nothing can cross, the Crossing page says why.
  • With only the shortcut on at the Mac, pushing through the PC's edge takes you home again, and both Crossing pages always show where the other machine sits.
  • After the link dropped mid-crossing, the PC's edge never crossed again until the shortcut or a settings change.
  • With Corner and Edge both on, a straight push near the corner now crosses on the Mac, as it already did on the PC.
  • Pairing by a typed name no longer stalls while the name is looked up.
  • A hand-edited config with an odd entry in a list is treated as a bad setting rather than stopping Beamer at start.
  • The example config files show only the three settings a hand setup needs, and the Windows installer refuses 32-bit Windows, which Beamer has never run on.

Still not handled: a dead key typed on the PC (´ then e) does not cross, so the accent is lost on the Mac. Files do not cross, only text and images.

SHA-256

fb02991d740ae1c449914c870c64b51d8736cd06a739dd88cbb3061f13e1c653  Beamer-1.4.0.dmg
2492ef11a8935e3292528441d3a84de3cb0be9fbdbd038a2c6b6280db6577126  Beamer-Setup-1.4.0.exe

Don't miss a new beamer release

NewReleases is sending notifications on new releases.