Nightly build: This automated prerelease is for testing and evaluation. Features and stored data may change before a stable release.
Before installing
- Match the complete hardware name and binary suffix. Do not substitute a binary merely because two devices use the same ESP32 family.
- See Install/Update Instructions for the supported flashing methods.
- See GPS Modification when adding GPS to compatible hardware.
- Flipper Zero users should install the current Marauder Companion.
Flipper hardware: Flipper Zero WiFi Dev Board and Marauder Dev Board Pro/BFFB use different firmware targets.
Marauder v6: Check the revision printed on the screen side of the PCB. Use
_v6.binfor v6 and_v6_1.binfor v6.1/v6.2.
Firmware assets
| Hardware | Release binary |
|---|---|
| Flipper Zero WiFi Dev Board (Flipper Zero, WiFi Dev Board) | _flipper.bin
|
| Flipper Zero Multi Board S3 (MultiBoard S3, Multiboard S3) | _multiboardS3.bin
|
| OG Marauder (Marauder v4, Old hardware) | _old_hardware.bin
|
| Marauder v6 (New hardware) | _v6.bin
|
| Marauder v6.1 (Marauder v6.2, AWOK V2 screen, AWOK V3 screen) | _v6_1.bin
|
| Marauder Kit | _kit.bin
|
| Marauder Mini | _mini.bin
|
| ESP32 LDDB (NodeMCU, Wemos) | _esp32_lddb.bin
|
| Marauder Dev Board Pro (BFFB, AWOK V3 flipper) | _marauder_dev_board_pro.bin
|
| M5StickC Plus | _m5stickc_plus.bin
|
| M5StickC Plus 2 | _m5stickc_plus2.bin
|
| ESP32-S2 Reverse Feather (Rev Feather) | _rev_feather.bin
|
| Marauder v7 | _marauder_v7.bin
|
| Marauder CYD 2432S028 (CYD 2432S028R) | _cyd_2432S028.bin
|
| Marauder CYD 2432S024 GUITION (RL Phantom) | _cyd_2432S024_guition.bin
|
| Marauder CYD 2432S028 2 USB | _cyd_2432S028_2usb.bin
|
| Marauder CYD 3.5 inch | _cyd_3_5_inch.bin
|
| M5 Cardputer | _m5cardputer.bin
|
| M5 Cardputer ADV | _m5cardputer_adv.bin
|
| ESP32-C5-DevKitC-1 (ESP32-C5 DevKit) | _esp32c5devkitc1.bin
|
| LilyGo T-Dongle C5 (T-Dongle C5, T Dongle C5) | _t_dongle_c5.bin
|
| M5 Nano C6 (M5NanoC6) | _m5nanoc6.bin
|
| Marauder Pancake (Pancake Marauder V8) | _pancake.bin
|
| POOM (Stellar IoT POOM) | _poom.bin
|
| Marauder v8 | _v8.bin
|
| Marauder Mini v3 (Mini v3) | _mini_v3.bin
|
| Dual Mini C5 (Dual C5 Mini) | _dual_mini_c5.bin
|
ESP32-C5 targets require their documented flash layout. See the ESP32-C5 guide and Supported Hardware.