This is release 3.67.10.20230114 of RaspberryMatic which is a major release with the following bugfixes and feature changes:
Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag
🚧 Changes:
For all changes, see the full commit log.
CCU/HomeMatic service changes:
- updated OCCU version to 3.67.10-3 integrating full compatibility to the CCU3 3.67.10 firmware which comes with the following upstream (eQ3) performed changes:
- With the
HmIP-SWO-*
, the parameter "Wind speed" was translated incorrectly in the English texts of the WebUI. - With the
HmIP-PSM*
no direct link to channel 7 was possible. - Device configuration parameters for channel 1 of
HmIP-eTRV-B-2
were not shown completely. - When creating direct links between
HmIP-MOD-RC8
andHmIP-BBL
orHmIP-FBL
, the correct default profile is now displayed. - Device images in the device firmware overview were not displayed correctly for some devices.
- Differentiation between minimum temperature and "Off" at
eTRV-C-2
was corrected. - Pictures with overview of pushbutton channels for
HmIP-BS2
andELV-SH-BS2
corrected. - Incorrect display of the EULA corrected.
- With
HmIP-FWI
, "Code 21" could not be selected in programs. - No negative values below "-100" could be shown in diagrams.
- When calling the XML-RPC method "reportValueUsage" of the LegacyAPI (HmIP) with the parameter value 0, the direct link between control center and device channel was not deleted.
- Adjustment of the slat position texts in the profile settings of direct links of blind actuators.
- For
HmIP-eTRVs
, the status of the valve drive is now displayed under Status and operation, in the event of an error during adaptation travel. This only applies to devices that have been CCU firmware version or higher. - Text changed during device firmware update of event listener.
- In the HmIP-BWTH, "Heating valve open" / "Heating valve closed" is now set under Status and operation for channel 10 depending on the "NO / NC" setting.
- There is now a device object for the CCU3 coprocessor / RPI-RF-MOD. This means that status values such as duty cycle and carrier sense of the CCU3 coprocessor / RPI-RF-MOD can be displayed in the CCU and used in programs.
- With the
- updated the default HmIPW-DRAP firmware files to latest official version (2.4.28) available (#2145).
- modified home assistant addon config to support to also set external ports for the CCU-Jack Addon (#2011).
- implemented support to use the HomeMatic/BidCos-RF LAN-Gateway mode without having to downgrade the RF firmware but use
/dev/mmd_bidcos
as the serial device for thehmlangw
daemon. This finally allows to use aRPI-RF-MOD
orHmIP-RFUSB
for the BidCos-RF LAN-Gateway mode (#2132, @jp112sdl).
WebUI changes:
- renamed
0078-WebUI-Fix-SetDeviceProfile
WebUI patch to0173-WebUI-SendPOSTRequest
and unified it with changes to switch allSendRequest()
calls inwebui.js
to a newSendPOSTRequest()
function which will performAjax.Updater()
post request calls instead so that query strings do not end up being too long for some use cases (e.g. in case of being used with an ingress proxy like in the HomeAssistant Addon case, #1189). - fixed issue in
0155-WebUI-Add-HmIP-RFUSB-Support
WebUI patch which incorrectly removed support for the "HmIP-HAP JS1" maintenance channel support (cf. #2150 (reply in thread)) - integrated a new
0174-WebUI-Fix-MissingETRVparams
WebUI/OCCU bugfix patch which fixes an issue where since OCCU 3.65.x some options/parameters of certain HmIP-eTRV devices were not displayed anymore in the WebUI due to a upstream typo in thelegacy-parameter-definition.config
file (#2027). - modified the home assistant ingress proxy (
ha-proxy.js
) to exclude/jpages/
urls from the charset encoding conversion becauseHMIPServer
always seems to send in utf-8 but unfortunately without explicitly addingcharset=utf-8
to the content-type. This resulted in broken charset conversions like for umlauts if used in the groups, diagrams and other HMIPServer delivered WebUI portions (#2139). - modified
0004-LocalSSLCert
WebUI patch andS50lighttpd
startup script to use elliptic curve based algorithms when generating default private key and https certificates. - updated
0031-WebUI-Fix-FileUpload
WebUI bugfix patch to include a fix for accepting certificate files containing elliptic curve based private keys and certificate files (#2126). - modified
0007-WebUI-Enhanced-FirmwareUpdate
WebUI patch to include a sha256 checksum check to first check for potential inconsistent backup files before trying to restore it. This should catch rare sbk file inconsistencies that could happen (cf. https://homematic-forum.de/forum/viewtopic.php?p=749245#p749250). - modified
0042-WebUI-HeatingControl-HumidityBatteryValveState
WebUI patch to show the humidity also in HM/BidCos-RF heating groups (#2106, @jp112sdl). - downgraded
prototype.js
to last 1.6 version (1.6.1) to stay compatible with the API used in the WebUI, thus fixing some issues since the last release (#2105, #609). - integrated a regression fix for updating spectrum.js to 1.8.1 (#2102).
- updated CodeMirror to latest 5.65.11 version.
Operating system changes:
- updated tailscale to latest 1.34.2 version.
- updated RaspberryPi firmware+kernel to latest 1.20230106 (5.15.84).
- updated upstream kernel to 5.15.86.
- set
discard=on
as a default in theinstall-proxmox.sh
VM installation script on fresh scsi0 disks to make sure the VM can properly issue trim operations via "fstrim" to decrease virtual disk size.
👪 Contributors (alphabetically):
📝 Support:
For support on installation and help please visit the following web pages:
RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪
📦 Download:
The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256
checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img
files on a fresh installation media (e.g. microSD card):
-
RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
📦 RaspberryMatic-3.67.10.20230114-rpi4.zip
SHA256: 29293c484844eb76d08b0141c8f8a9af5fbbd414af2f0bcdd5d6229f416df264 -
CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
📦 RaspberryMatic-3.67.10.20230114-rpi3.zip
SHA256: 474b6815f50c95cea024d1c2676aa8e84f9ec39352874e80b0d43d1704e57489
📦 RaspberryMatic-3.67.10.20230114-ccu3.tgz (only for initial CCU3 Firmware -> RaspberryMatic Upgrade)
SHA256: 1e6a77e866e12924f6fa4a3df17d1a062e26a0d9857e174ffc7019b28b44c72d -
RaspberryPi2 Model B – (installation):
📦 RaspberryMatic-3.67.10.20230114-rpi2.zip
SHA256: ff90af96011287b9da5111192c3113f402efedb470f5db3c5f2caecb6dc833b2 -
RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
📦 RaspberryMatic-3.67.10.20230114-rpi0.zip
SHA256: 8c58a7a1f070604e7932baf254ff66cd9c54f6abeaf64966839d83291e002285 -
TinkerBoard S, TinkerBoard – (installation):
📦 RaspberryMatic-3.67.10.20230114-tinkerboard.zip
SHA256: 1df00838d74b7430127908d6e3fb47084b1c8b0731aa4d02b4ce0ae589329c30 -
ODROID-N2/N2+/C4/C2 – (installation):
📦 RaspberryMatic-3.67.10.20230114-odroid-n2.zip
SHA256: b816f496073d83e3de4a7eac9a18e95bfe1ecdc3e7959b56c2102bd38f09a89f
📦 RaspberryMatic-3.67.10.20230114-odroid-c4.zip
SHA256: 1cb43de7c530436606b2fafacba4f9672a6598f35f0773c717b158328b66b65a
📦 RaspberryMatic-3.67.10.20230114-odroid-c2.zip
SHA256: 9420db8a42137af856b6238d02ed93b6fd83261e6b7c554a0276847872496fba -
Intel NUC – (installation):
📦 RaspberryMatic-3.67.10.20230114-intelnuc.zip
SHA256: 01122c1e2e5c0474b2de40cd5ff37dd533e9f08607050c5f8e7301fb87096666 -
Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
📦 RaspberryMatic-3.67.10.20230114-ova.zip
SHA256: da472a647029bb7c1f04e803382a33fb26a42e958f9e713b94243bf802ebb780
📦 RaspberryMatic-3.67.10.20230114.ova (only for initial OVA installation)
SHA256: 4abe63e9eb3a7c27388f6d73066d2dc52a6ad92275d7b0cc2c3025ff5e42368a -
Docker / Open Container Initiative (OCI) – virtual appliance (installation):
📦 RaspberryMatic-3.67.10.20230114-oci_amd64.tgz (amd64/x86_64)
SHA256: 84759079310f0894726ab70a0008c61137c0a04b2b63ff49cdd92a071156fbec
📦 RaspberryMatic-3.67.10.20230114-oci_arm64.tgz (arm64/aarch64)
SHA256: 2ddc3316d7c234ada519be31a13d9682b5cb02f562c856f0be7dab29c1426b77
📦 RaspberryMatic-3.67.10.20230114-oci_arm.tgz (arm/armhf)
SHA256: da773f2dfae84972c763a94be446231f8bf636a8dbfd5538c508dfcb0e824dd5 -
Kubernetes / K8s – virtual appliance:
see install documentation -
Home Assistant Add-on – virtual appliance:
see install documentation