github its-me-prash/vwgroup-connect-ha v4.10.0b1
VW Group Connect v4.10.0b1

latest releases: v5.4.1, v5.4.0, v5.3.0...
pre-releaseone month ago

VW Group Connect v4.10.0b1

Home Assistant integration for Audi · VW · Škoda · SEAT · CUPRA · Porsche · VW US/CA.

What's new in this release / Was ist neu in diesem Release

Added

  • Sixteen more HV, thermal and climate readings for cars on the raw-signal portal feed (#1661, thanks @dasebi91).
    The same feed we already read cell voltages from, but this car sends a different signal set from different control
    units. New: drive-battery current (the sign is kept exactly as the car reports it — charging is positive), energy
    drawn from the pack and whether those counters have wrapped, the coolant feed temperature and the whole HV coolant
    loop, the two coolant valves, where in the pack the hottest/coldest sensor and the highest/lowest cell actually sit,
    the climate and heat-pump state, the blower target, and the outside temperature. Two readings are deliberately not
    believed: a −40 °C "no reading" sentinel, and a charge-plug status that reports as uninitialised — calling that
    "no cable" would be a confident wrong answer.
  • A lot of data the portal was already sending, in a shape we ignored (#1661, thanks @dasebi91).
    Some cars' portal feed carries whole vehicle diagnostic responses as encoded blobs — on the reporter's car that was
    ten of them, thrown away on every poll. They're decoded now, which brings: the range the car's own display shows,
    the complete 12 V battery picture (voltage, charge, temperature, ageing, current), an outside humidity and dew-point
    reading (the integration had no humidity at all before), plus the odometer and a genuine per-read capture time.
    The 12 V battery's charge is kept strictly apart from the drive battery's — they are not the same number. Blobs we
    can't interpret yet are deliberately left untouched so they keep being reported instead of silently vanishing.
  • The portal's own data-delivery trigger now has a sensor (Vehicle Data Scout, #1637 and 16 more reports).
    Twenty-two Scout reports landed in two days, across Volkswagen, VW Commercial, Audi and CUPRA, all for the same
    leaf: the delivery trigger the EU Data Act snapshot carries about itself. It gets its own diagnostic sensor rather
    than being folded into the existing report trigger — the official portal field catalogue documents those as two
    different things with different value sets, so one sensor for both would have mixed two unrelated enums. Off by
    default. A leaf nobody maps is re-reported on every single poll, which is how twenty-two issues happened.

Changed

  • The "portal has no vehicle data yet" warning now names the car it's about (#1656, thanks @kalwados).
    The warning is raised once per account and only mentioned the brand, so with two Volkswagens on one account there
    was no way to tell which car was affected — and it really can be one and not the other. It now lists the cars that
    are actually without data, with the VIN shortened to its last six characters, because people paste these warnings
    into bug reports. With nothing known yet it falls back to the brand name, exactly as before.

Fixed

  • An electric car whose feed has no state of charge no longer hides every EV entity (#1661, thanks @dasebi91).
    The integration decided a car was electric from its state of charge, electric range or charging state. The
    reporter's ID.7 sends none of those three — but it does report a 218 Ah drive battery at 355 V with per-cell
    voltages and pack temperatures, and it was still treated as not-electric, so the whole EV entity set stayed hidden.
    That is what it looked like as "missing battery SoC": the sensor wasn't empty, the car wasn't recognised as electric
    at all. A drive battery above 60 V (the legal high-voltage threshold, so a 48 V mild hybrid can't trip it) now
    counts as evidence on its own. It only says "this car has a drive battery" — it deliberately doesn't claim the car
    has no engine, because a pack voltage doesn't prove that.
  • The volkswagen.de read channel no longer has to be re-added after every restart (#1659, thanks @Joassens).
    On some accounts the silent session resume bounced straight back to the portal's own login page. That landing
    wasn't recognised as a dead session, so the channel reported "could not silently resume" and never tried the
    stored-password re-login some users had switched on — it just told them to re-add the channel, every single
    restart. It's recognised now: the opt-in re-login gets its chance, and if it isn't on, the message says the
    session expired instead of something opaque.

Full diff vs v4.9.0 / Kompletter Diff zu v4.9.0

Every commit, file and code change between the two versions:
Jeder Commit, jede Datei und jede Code-Änderung zwischen beiden Versionen:

➜ v4.9.0...v4.10.0b1

Recent releases / Letzte Releases

If you're upgrading from an older version, also read these notes:

Wenn du von einer älteren Version updatest, lies auch diese Release-Notes:

Full history: CHANGELOG.md

Installation / Update

HACS users: the update notification appears automatically within ~6 hours of the release.

HACS-User: Der Update-Hinweis erscheint automatisch innerhalb von ~6 Stunden nach dem Release.

Manual install / Manuelle Installation:

  1. Download vag_connect.zip from this release / vag_connect.zip aus diesem Release herunterladen
  2. Unzip and copy custom_components/vag_connect/ to your HA config/custom_components/ folder, replacing any older copy / Entpacken und den Ordner custom_components/vag_connect/ in dein HA config/custom_components/ kopieren — alten Ordner ersetzen
  3. Restart Home Assistant / Home Assistant neu starten

Supported brands / Unterstützte Marken

Volkswagen EU · Audi · Škoda · SEAT · CUPRA · Volkswagen US/CA (Beta) · Porsche (Beta)

Found a bug? / Bug gefunden?

Open an issue with the bug-report template: https://github.com/its-me-prash/vwgroup-connect-ha/issues/new/choose

Bug-Report-Template: https://github.com/its-me-prash/vwgroup-connect-ha/issues/new/choose

Please mask your VIN to the last 6 characters and remove email/tokens/GPS before posting.

Bitte VIN auf die letzten 6 Zeichen kürzen und Email/Tokens/GPS vor dem Posten entfernen.

Don't miss a new vwgroup-connect-ha release

NewReleases is sending notifications on new releases.