github illuminus5/skiff v2.7
Skiff 2.7

one hour ago

Skiff 2.7: work your FM-1 from the Screen tab, full screen, the Screen tab on the SMK-37, a piano roll in the editor, sync out for Pocket Operators, and a batch of fixes from your reports.

Thank you to everyone who reported, tested and sent code. Pull requests in this release: @TomPeak (the editor's piano roll, the macOS test build), @ankitpaul9 (V15's voices kept on the way back), @drageryd (SYNC OUT), @Mewsse (the Screen tab on the SMK-37). Reports: @jmiller2416 and robm6009 on YouTube (the editor's stray entries), @b13nn and @harmakit (the phaser), @benjaminguerrer (TRIO, the filter on spread voices), @michaelmon1203 (SUB BASS), @tescalada, @houston12346-hash and @chaixdev (2 CORES), @aklinbail (REC with inverted LEDs), HprFcs on YouTube (SELECT in the MENU), @sfs28 and @Section25 (the README).

Install on the FM-1: in Chrome or Edge with the Skiff installer, or download skiff-2.7.fwsc below and run python tools/fm1_install.py skiff-2.7.fwsc. Custom firmware, at your own risk; the installer page also takes the FM-1 back to the official firmware, V15 or V16.

Install on the SMK-37 Pro: read SMK37.md first, then the same installer page, or python tools/fm1_install.py skiff-2.7-smk37.fwsc.

From 2.5, 2.5.1 or 2.6: nothing saved changes; your projects, sounds and patterns stay as they are.

New

  • The Screen tab works your FM-1. Tick Controls and the FM-1's panel appears round its screen: click or tap the buttons and keys, drag or scroll a knob. Right-click (or Shift-click) a button to hold it down, so HOME can be held for SHIFT. On a computer the keyboard works too, as on Try Skiff. The panel's lights follow the unit's. On a phone held upright you get the FM-1's tall layout; on a computer or a tablet held sideways, the screen stays large with the controls beside it. MASTER stays on the unit (it's a real knob).
  • Full screen, one press. The Screen tab has a Full screen button now, with or without the controls.
  • The Screen tab on the SMK-37 (by @Mewsse): the SMK-37's screen in the editor too, following its keys, pads, faders, wheels and pedal. The screen alone: the controls around it are the FM-1's for now.
  • The editor's Sequencer as a piano roll (by @TomPeak): draw, move and stretch notes with the mouse, the drum lanes on a DRUM track, and a lane under them for velocity, chance, nudge and ratchet. The step list is still there, folded.
  • MENU › AUDIO › SYNC OUT (by @drageryd): sync pulses on the left or right output, the music in mono on the other, for a Pocket Operator (SY4/SY5) or a Volca. SYNC PPQN and SYNC INVERT go with it. Off unless you turn it on.
  • In the MENU, SELECT turns the tabs too, as everywhere else (ALGORITHM still does).

Fixed

  • The editor added a pattern to entry A by itself (#133, and robm6009 on YouTube). Pressing NEW on another entry gave that entry a pattern but left the track where it was, so what you then drew was saved as a new pattern in the first empty entry. Now NEW (stopped) puts the track on its new entry, as a double-click does, and the Sequencer tab says which entry and pattern it's editing.
  • GLO › CHORUS's PHASER squealed at a high FEEDBACK (#101). A number inside the phaser overflowed; it can't now.
  • FX › INSERT's FILTR missed voices spread with SPREAD (#119), and the lanes of a drum kit panned left or right. It filters all of it now.
  • TRIO popped on a repeated note (#118): a retriggered voice lost its filter for an instant.
  • SUB BASS clicked at the start of a note (#110): a sine now starts from zero on a new voice.
  • 2 CORES: after a crash or a hang on 2 CORES, the FM-1 now starts on 1 CORE and says CORE 2 FAILED: 1 CORE (#126). MENU › SYSTEM › CPU turns 2 CORES back on.
  • MENU › LEDS INV: an armed REC breathes now instead of going dark (#134).
  • Going back to V15 (by @ankitpaul9): Skiff's pattern pool shares flash with V15's factory voices, so after saving patterns, V15 could come back with broken voices that no reinstall fixed. On the way back to V15, Skiff now writes V15's own data back first. (Going from Skiff to V16 and then to V15 isn't covered: go back to V15 first.)
  • The README says where your own drum kits are (a DRUM track's first EDIT page, #124), and that Skiff doesn't use the FM-1's Bluetooth: holding HOME opens the MENU (#128).
  • For developers: the host tests build on macOS again (@TomPeak); every build leaves the USB serial console out, as releases always did (./build.sh --console builds it in, without the Screen tab's cast, to fit).

Known

  • The Screen tab's controls are the FM-1's only, for now, and need 2.7 on the FM-1. On an SMK-37 it needs 2.7 and shows the screen alone; tried on an SMK-37 Pro, not yet on the Elite or the MKE-P37.
  • HOME's and EDIT's waveform scopes in the Screen tab can be a few pixels off (the HALL reverb comes out very slightly differently in the copy).
  • #126: why some FM-1s crash on 2 CORES is still open; 2.7 just stops them crashing again. If yours did, the 320 MHz test in #126 would help us.
  • TRIO's envelope on a repeated note carries on from where it is (by design); a shorter GATE lets each release finish.
  • Tried on our FM-1 and SMK-37 Pro: 2.7's packages and editor, in Chrome on a PC.

Going back to 2.6

  • Install skiff-2.6.fwsc (or the SMK package) from 2.6's release. Nothing saved changes between 2.6 and 2.7.

Credits

Skiff is built on Felucca by Leo Kuroshita (Hügelton Instruments). The README's Credits have the rest.

Files

  • skiff-2.7.fwsc: the FM-1 package (identity FM-1_727)
  • skiff-2.7.zip: the FM-1 package, the app image, SHA256SUMS and every licence and attribution text they need
  • skiff-2.7-smk37.fwsc: the SMK-37 Pro package (identity SMK-37 Pro_727)
  • skiff-2.7-smk37-elite.fwsc, skiff-2.7-smk37-mke.fwsc: the SMK-37 Elite and MKE-P37 packages, not tried on a keyboard yet

SHA-256:

82e9068a22c9949dd2d452a317feb365b918cff9fb9337c820eed91324d75d75  skiff-2.7.fwsc
8cb824aadfd4cba9554e601f9e5155ce084fff49e747c0d35755ee5e692b8c08  skiff-2.7.zip
1dc758db7df2c69eb91134d5bed9c28d09f5ef854fae5e77a19476b6fc021b68  skiff-2.7-smk37.fwsc
91bf6ae27aba9d277dd9ae63d9327ea918523a257842cc52d7d9b7568dd9f1c5  skiff-2.7-smk37-elite.fwsc
4e513706e4cc74c2ab587430eb1f2d24a2ba3ba5bde189329b5dec5a216a1983  skiff-2.7-smk37-mke.fwsc

The packages hold three unmodified files of the JieLi AC79 SDK (Apache-2.0); see LICENSING.md. M-VAVE, FM-1 and SMK-37
are trademarks of their respective owners; Skiff is not affiliated with or endorsed by them.

Don't miss a new skiff release

NewReleases is sending notifications on new releases.