github hreskiv/mikr v2.9.0

one hour ago

Added

  • Interfaces: see which interface lists each port is in, with a tag on the port and a List picker that lights up a list's members. A block under the interfaces shows every list, its members, what it includes and excludes, and the firewall rules that use it.
  • Interfaces: change interface lists from the device page, behind a review, a backup and a rollback the device does by itself if you do not confirm.
  • Firewall: an interface list in a rule opens who is in it.
  • Ports: turn PoE out on a port to Auto, Forced on or Off, or power-cycle it for a few seconds, one port from its panel or several at once from PoE ports. A change on the port mikr reaches the device through is rolled back by the device itself unless you confirm it.
  • Ports: a Traffic / PoE switch on the ports shows which PoE ports are powering, waiting for a load, off, in a fault or power-cycling, with the watts under each port.
  • Templates: a template run shows in Active Tasks and Task History, so you can follow it after a reload or from another page.
  • Firewall: a new Address lists view shows every IPv4 and IPv6 address list with its entries, comments, timeouts and dynamic entries. A list named in a rule opens it.
  • Alerts: set a threshold on a firewall address list, such as port-scan=200. When the list holds that many dynamic entries, the device shows in Needs attention and the metric webhook fires. Set it in Settings for all devices or on a single device.
  • Devices: a device shown as Not accessible now says why the last poll failed, for example a refused login, in Needs attention, on its page and in the badge's hover text. When the device is polled over SNMP and SNMP does not answer, it says so and what to check on the router.
  • Topology: a site that hangs off another site's switch or access point shows that device on its map, marked with its site and a link to that site's map.
  • Topology: Wi-Fi links between your devices show the signal on the line, and the signal and rates in the link panel.
  • Devices: the ISP links card shows how much each provider link received and sent over the last 24 hours or 7 days, with its average and peak rate.

Fixed

  • Templates: a device that does not answer is skipped after a failed connection or three timeouts in a row, instead of waiting out a timeout for every line, and it no longer holds up other devices.
  • Backups: in Backup All, a device that is slow to export no longer holds up the others.
  • LTE: a modem whose firmware RouterOS cannot update no longer fills the router's log with errors while the LTE tab is open.
  • Upgrades: a board without health sensors no longer writes a syntax error into its log after each RouterOS upgrade.
  • Wi-Fi: clients on the older wireless package now show signal, uptime and rates.
  • Topology: a device seen through a Wi-Fi bridge is no longer drawn as connected over Wi-Fi to a device that has no radio.
  • Topology: the line to a group of Wi-Fi clients is dashed like other Wi-Fi links, and an opened group's names and addresses stay inside the card.

Don't miss a new mikr release

NewReleases is sending notifications on new releases.