v2.33.0 — Clients that never get lost, links that show
⭐ The main event: clients first
Three changes that shift the day-to-day:
- Indefinite client retention: discovered devices no longer disappear from the list when their lease expires or the ARP table gets cleared. They stay listed as offline with their last known name, IP and last seen (#1145).
- Delete client: a new action in the edit sheet, with confirmation. A deleted client only comes back if seen on the network again.
- One client, multiple MACs: devices that use a different MAC per network (a watch, a laptop) can now be linked into a single row (#1151).
Also
- Fleet unit pause: pause a unit without removing it — it stops being polled, stays quiet and wears its own badge (#1085).
- Topology and rack: uplinks now derive from the managed switch's FDB (no more flat star or invented cables); rack mounts show the real fleet names; unidentified devices are no longer offered as candidates; and a new uplink unit designation for the auto-cabling, which syncs itself when the physical cabling changes. This feature was designed with the community in discussions #1108 (draw your physical rack) and #1109 (auto-cabling from detected topology).
- Real latency: the gateway latency card shows the measured 24 h series (before: a fake 0 ms with a demo chart) (#1148).
- Docs: the landing and READMEs cover channel analysis, MCP and the rack (#1152).
Fixes
- MQTT: the publisher uses gonzalop/mq v0.9.11 (goodbye to the reconnect storm that froze Home Assistant for hours), waits for the old publisher to shut down on hot reconfig, and guards its internal state with a mutex (#1153, #1158, #1162).
- Ports and LLDP: port tooltips no longer clip IP/MAC/detail and show the LLDP neighbor info (#1149, #1150).
- Channels: the picker only offers APs (#1147, partial: the ad hoc scan and conservative suggestions remain).
- Firmware upgrades: out of Labs, with its own visibility toggle (#1146).
- Security and compliance: THIRD_PARTY.md with dependency licenses included in the release archives, golang.org/x/crypto bump (2 SSH CVEs) and other dependency updates, race fixes in the RTL console scraping and in the tests (#1167–#1173).
Special thanks to @crowedavid: the client retention, linking, LLDP and latency work in this release started with his reports.
v2.33.0 — Clientes que no se pierden, enlaces que se ven
⭐ Lo principal: los clientes mandan
Tres mejoras que cambian el día a día:
- Retención indefinida de clientes: los equipos descubiertos ya no desaparecen de la lista cuando caduca su lease o se limpia la tabla ARP. Permanecen como offline con su último nombre, IP y última vez vistos (#1145).
- Borrar cliente: nueva acción en la hoja de edición, con confirmación. Un cliente borrado solo reaparece si se le vuelve a ver en la red.
- Un cliente, varias MAC: los dispositivos que usan una MAC distinta por red (un reloj, un portátil) ahora se enlazan en una sola fila (#1151).
Además
- Pausa de unidades de flota: pausa una unidad sin borrarla — deja de sondearse, no alerta y se distingue con su insignia (#1085).
- Topología y rack: los uplinks salen ahora del FDB del switch gestionado (adiós a la estrella plana y a los cables inventados); los montajes del rack muestran los nombres reales de la flota; los equipos no identificados ya no se ofrecen como candidatos; y nueva designación de unidad central para el auto-cableado, que se sincroniza solo cuando cambia el cableado físico. Esta función se diseñó con la comunidad en las discusiones #1108 (draw your physical rack) y #1109 (auto-cabling from detected topology).
- Latencia real: la tarjeta de latencia del gateway muestra la serie de 24 h medida (antes: un 0 ms falso con gráfica de demo) (#1148).
- Documentación: landing y READMEs al día (análisis de canales, MCP, rack) (#1152).
Correcciones
- MQTT: el publisher usa gonzalop/mq v0.9.11 (adiós a la tormenta de reconexiones que congelaba Home Assistant durante horas), espera el apagado del publisher viejo al reconfigurar en caliente y protege su estado interno con mutex (#1153, #1158, #1162).
- Puertos y LLDP: los tooltips de los puertos ya no recortan IP/MAC/detalle y muestran la información del vecino LLDP (#1149, #1150).
- Canales: el desplegable solo ofrece APs (#1147, parcial: quedan el scan ad hoc y las sugerencias conservadoras).
- Firmware upgrades: fuera de Labs, con su toggle propio de visibilidad (#1146).
- Seguridad y cumplimiento: THIRD_PARTY.md con las licencias de dependencias incluido en los archivos de release, bump de golang.org/x/crypto (2 CVEs SSH) y otras dependencias, fixes de carreras en el sondeo RTL y en los tests (#1167–#1173).
Gracias a @crowedavid: el trabajo de retención, enlazado, LLDP y latencia de esta release empezó con sus reportes.
All PRs in this release / Todos los PRs de esta release
#1143 · #1154 · #1155 · #1156 · #1160 · #1161 · #1163 · #1164 · #1165 · #1166 · #1168 · #1171 · #1172 · #1173 · #1174 · #1176 · #1179 · #1187 · #1188 · #1189 · #1190 · #1191 · #1192 · #1193 · #1194 · #1195
Instalación / Upgrade: curl -fsSL https://raw.githubusercontent.com/gnacho/netpulse/main/install.sh | bash — o actualiza desde Ajustes / or update from Settings.