Highlights
1. Embedded MCP server (labs) — your network, from your AI assistant
NetPulse now ships with a built-in read-only MCP server at /mcp: fleet
status, devices, alerts, topology and more, queried by your AI assistant
over HTTP with an API token. Labs-only, off by default, rate-limited and
audited.
2. LLDP-MIB topology on SNMP switches
Managed SNMP switches now use LLDP-MIB for topology discovery — proper
uplink visibility on hardware that never exposed an OpenWrt bridge.
This one exists thanks to @crowedavid — literally, without him and his
hardware this would not have been possible.
3. Rack canvas (experimental preview, labs)
A physical rack view: draw your 19" rack, place your routers, switches
and servers, and let NetPulse detect the cabling from the FDB —
including router-to-router uplinks. Very early preview: disabled by
default (enable it in Settings → Labs), still under heavy development.
Do not use it in production.
Also in this release
- Firmware Upgrades now lists only vanilla OpenWrt devices, with an
explanatory note — and graduates out of labs (#1121) - Alerts: the unread-only view option now persists (#1122), and the
read mark is forgotten when an alert is resolved (#1133) - Speedtest: adhoc button and "testing" state detection restored (#1132)
- Roaming: events client filter matches the details view and filters
are now multi-select (#1139) - UI: AdGuard and AP markers no longer shown where they do not apply (#1141)
- SNMP: virtual interfaces grouped instead of hidden (#1142, closes #1125)
- SNMP: whitespace-only ifAlias port labels ignored (#1077)
- Overview: first/last seen applied to the SSE device snapshot (#1111)
- Update dialog resized to match Pulse, with blurred backdrop (#1116)
Lo más destacado
1. Servidor MCP integrado (labs) — tu red, desde tu asistente IA
NetPulse incorpora un servidor MCP de solo lectura en /mcp: estado de
la flota, dispositivos, alertas, topología y más, consultables por tu
asistente IA por HTTP con token de API. Solo en Labs, apagado por
defecto, con rate-limit y auditoría.
2. Topología LLDP-MIB en switches SNMP
Los switches gestionados por SNMP ya usan LLDP-MIB para el descubrimiento
de topología: enlaces reales en hardware que nunca expuso un bridge
OpenWrt. Esta funcionalidad existe gracias a @crowedavid — literalmente,
sin él y su hardware esto no habría sido posible.
3. Rack canvas (vista previa experimental, labs)
Una vista física de tu rack: dibuja tu mueble de 19", coloca routers,
switches y servidores, y deja que NetPulse detecte el cableado desde el
FDB — uplinks entre routers incluidos. Vista previa muy temprana:
desactivada por defecto (actívala en Ajustes → Labs), aún en pleno
desarrollo. No la uses en producción.
Además en esta versión
- Actualizaciones muestra solo dispositivos con OpenWrt vanilla, con
nota explicativa — y sale de labs (#1121) - Alertas: la opción "solo no leídas" ahora persiste (#1122) y se olvida
la marca de leída al resolverse una alerta (#1133) - Speedtest: botón adhoc y detección de "testing" restaurados (#1132)
- Roaming: el filtro de cliente de los eventos coincide con el detalle
y los filtros son multiselección (#1139) - Interfaz: los marcadores AdGuard y AP ya no se muestran donde no
aplican (#1141) - SNMP: las interfaces virtuales se agrupan en vez de ocultarse (#1142,
cierra #1125) - SNMP: se ignoran ifAlias de solo espacios (#1077)
- Resumen: first/last seen aplicado al snapshot SSE (#1111)
- Diálogo de actualización con tamaño y fondo de Pulse (#1116)
Full changelog / Changelog completo
- #1138 — fix(rack): cables render via DOM-measured overlay
- #1139 — feat(rack): labs gating + fix(roaming): events filter multi-select
- #1135 — feat(rack): land the rack canvas iteration on main
- #1133 — fix(alerts): forget the read mark on resolve
- #1132 — fix(speedtest): adhoc button and testing detection
- #1130 — fix(rack): resolve conflict markers in Faceplate
- #1128 — fix(rack): fleet uplink hints from raw FDB evidence
- #1142 — feat(snmp): group virtual interfaces instead of hiding them
- #1141 — fix(ui): stop showing AdGuard and AP markers where they do not apply
- #1123 — feat(rack): physical rack canvas with auto-cabling (labs)
- #1122 — feat(alerts): persist the unread-only view option
- #1121 — feat(firmware-upgrades): only list vanilla OpenWrt devices
- #1120 — feat(settings): mark the MCP integration as labs-only
- #1119 — chore: ignore locally built binaries
- #1118 — feat(mcp): embedded read-only MCP server at /mcp
- #1117 — feat(snmp): use LLDP MIB on SNMP switches for topology discovery
- #1116 — fix(home): size the update dialog like Pulse and blur the backdrop
- #1111 — fix(overview): apply first/last seen to the SSE device snapshot
- #1077 — fix(snmp): ignore whitespace-only ifAlias port labels