github flybywiresim/aircraft v0.14.0
on GitHub

11 hours ago

A32NX/A380X Stable v0.14.0

We are excited to introduce our latest A32NX and A380X release, a comprehensive update to various long-standing features including a host of new features and improvements across the aircraft systems, flight deck, and flight planning tools.

All of our changes and more information is available on our release notes in our documentation website.

MSFS 2024 information
Both aircraft are now officially compatible with MSFS 2024. Please note that they are not yet a native 2024 package.

Our latest update to the FlyByWire Installer will allow you to install our aircraft to the right location for Microsoft Flight Simulator (2020 and 2024). Please make sure you are on the latest FlyByWire Installer and report any 2024-specific issues through our usual support channels.

Visit our installer documentation for more information.

Release Notes.

Please Note: Due to our development and operations workflows, version numbers for the A32NX and A380X are the same. Expect near-simultaneous releases of both aircraft moving forward.

Note: Throttle calibration is now required.
Throttle Calibration Guide

Note: Not Available on MSFS Marketplace.

Unedited Changelog

  1. [A380X/FMS] Fix speed margins being displayed in the wrong place for a Mach target - @BlueberryKing (BlueberryKing)
  2. [A380X/MFD] Visual update to reflect later avionics batches (overlapping tab selectors) - @flogross89 (floridude)
  3. [A380X/OANS] Fixed BTV message and chrono not appearing on OANS - @Jonny23787 (Jonathan)
  4. [A380X/APU] Fix too low APU BLEED pressure during engine starts (fix by BBK) - @flogross89 (floridude)
  5. [A380X/SD] Fix BLEED indications for APU BLEED and cross bleeds; Add HP GND air supply triangle - @flogross89 (floridude)
  6. [A380X/ELEC] Fix electrical distribution for ground servicing mode - @Gurgel100 (Pascal)
  7. [A380X/ECAM] Improved STROBE LT OFF memo behaviour - @Jonny23787 (Jonathan)
  8. [A380X/FCU] Update FCU font for QFE based on new references - @heclak (Heclak)
  9. [A32NX/EIS] Fix malformed W glyph on the EIS display units - @tracernz (Mike)
  10. [A32NX/RMP] Keep the ATC frequency tuned when spawning on the runway in MSFS2024 - @tracernz (Mike)
  11. [A380X/MFD] Add speed limit modification on VERT REV SPD page - @BravoMike99 (bruno_pt99)
  12. [A32NX/FWC] Fix PRED W/S OFF memo colour logic - @tracernz (Mike)
  13. [A380X/SD] Add video page with 'NOT AVAIL' text - @dzoeteman (Deniz)
  14. [A380X/PFD] Inhibit rudder trim indication in the air - @Jonny23787 (Jonathan)
  15. [A380X/ECAM] Add FLAPS LEVER NOT ZERO ECAM message - @Jonny23787 (Jonathan)
  16. [A380X/MFD] Add RETURN button to DATA/AIRPORT page - @Jonny23787 (Jonathan)
  17. [A380X/ECAM] Improve ALL PRIMARY CABIN FANS FAULT - @Jonny23787 (Jonathan)
  18. [A380X/FCU] Reduce FCU texture size from 5120 to 2560 - @heclak (Heclak)
  19. [A380X/MFD] Fix VERT DEV not updating in APPR page during descend phase - @heclak (Heclak)
  20. [A380X/VD] Add vertical display (first implementation) - @flogross89 (floridude)
  21. [FMS] Fix pseudo waypoint transmission for F/O side when EFIS range different from CAPT side - @flogross89 (floridude)
  22. [A380X/SURV] Enable SURV system switching via MFD SURV page; Add ECAM faults for TERR/GPWS - @flogross89 (floridude)
  23. [A380X/MFD] MFD F-PLN page data display improvements when no predictions or flightplan available - @BravoMike99 (bruno_pt99)
  24. [A380X/PFD] Fix FMA to update current AUTO BRK selection during RTO and rollout - @Jonny23787 (Jonathan)
  25. [FMS] Use proper DME location for AF, CD, FD legs on MSFS2024 and add MSFS2020 fallback to improve AF legs - @tracernz (Mike)
  26. [FMS] Improve CR and FC leg geometry - @tracernz (Mike)
  27. [GENERAL] Fixed inconsistency in the PED/NO SMOKING option when it hasn't been set - @tracernz (Mike)
  28. [A32NX/FMS] Add approach via auto-selection. - @tracernz (Mike)
  29. [A380X/MFD] Fixed ENTER DEST DATA message not clearing automatically - @BravoMike99 (bruno_pt99)
  30. [A380X/FCU] Fix selected speed initial target not being managed speed in non SRS - @BravoMike99 (bruno_pt99)
  31. [A380X/SD] Adjust BLEED page visuals and indications logic - @lukecologne (luke)
  32. [A380X] Add default CPT and FO seat positions to FLT files - @heclak (Heclak)
  33. [A380X/ND] Show RNP on approach identifier for RNP AR approaches - @BravoMike99 (bruno_pt99)
  34. [ND] Improve vertical position of approach message - @BravoMike99 (bruno_pt99)
  35. [A380X/FBW] Improve alternate law and direct law activation conditions and ECAM procedures - @flogross89 (floridude)
  36. [A380x/FWS]: Update normal checklists to newer Airbus standard and harmonize TO memo - @becas22 (bernardor96)
  37. [A32NX/ECP] Implemented realistic simulation of the ECAM control panel - @tracernz (Mike)
  38. [A32NX] Fix speedbrake handle not animating smoothly - @heclak (Heclak)
  39. [A380X] Fix speedbrake handle not animating smoothly - @heclak (Heclak)
  40. [ADR] Implement accurate altimetry computations - @tracernz (Mike)
  41. [A32NX] Split EIS baro corrections between captain and first officer side - @tracernz (Mike)
  42. [A32NX] Increased available baro correction range to 745-1100 hPa - @tracernz (Mike)
  43. [A32NX/FWC] Add baro ref and altitude discrepancy warnings - @tracernz (Mike)
  44. [A32NX/PFD] Add CHECK ALT message - @tracernz (Mike)
  45. [A380X] Increased available baro correction range to 745-1100 hPa - @tracernz (Mike)
  46. [A380X/PFD] Fixed missing red lines on altitude tape failure indications - @tracernz (Mike)
  47. [A380X/RMP] Added localvars for RMP frequencies and state for API users - @tracernz (Mike)
  48. [A380X/RMP] Added handling of all COM key events for API users - @tracernz (Mike)
  49. [A380X/RMP] Added standby mode handling for VHF3 - @tracernz (Mike)
  50. [A380X/RMP] Keep the ATC frequency tuned when spawning on the runway in MSFS2024 - @tracernz (Mike)
  51. [A32NX/ND] Fixed ND range change & mode change font size - @Lucas-IQ21 (Lucas)
  52. [A380X/FMC] Use the estimated gross weight to compute the max level for step climbs - @tracernz (Mike)
  53. [ND] Fixed TAS, GS & Wind data not taking source switching into account - @BravoMike99 (bruno_pt99)
  54. [A32NX/SD] Add flashing for AUTO BRK element - @Jonny23787 (Jonathan) & @BlueberryKing (BlueberryKing)
  55. [A32NX/FMS] Change GA PERF speeds to match APPR PERF speeds - @Jonny23787 (Jonathan)
  56. [EFB] Fixed overflow on settings pages when the page is too long - @heclak (Heclak)
  57. [EFB] Renamed "Weight Unit" pin program to "US Units" to reflect it's actual effect and real-world name - @tracernz (Mike)
  58. [A32NX/MCDU] Fix units on arrival airport runway lenghts - @Lucas-IQ21 (Lucas)
  59. [A32NX/A380X] Handle the MASTER_CAUTION_ACKNOWLEDGE and MASTER_WARNING_ACKNOWLEDGE key events - @tracernz (Mike)
  60. [A32NX/FMS] Fix automatic cruise temperature calculation on INIT A page - @BlueberryKing (BlueberryKing)
  61. [A380X/MODEL] Fixed RMP 1 keypad backlighting - @heclak (Heclak)
  62. [A380X/MODEL] Fixed animations and emissives of some ECAM buttons - @heclak (Heclak)
  63. [A380X/MODEL] Overhead maintenance panel backlighting is no longer controlled by integrated lighting - @heclak (Heclak)
  64. [A380X/MODEL] Tweaked EFB positioning - @heclak (Heclak)
  65. [A380X] Fixed FO EFB and OIT display not working - @heclak (Heclak)
  66. [A380X/MODEL] Improved CPT and FO tray clickspot and animation - @heclak (Heclak)
  67. [A380X] Fixed glareshield sidestick priority annuciators not showing in light test - @heclak (Heclak)
  68. [A380X] Fixed GND HF DATALINK switch stuck in ON state - @heclak (Heclak)
  69. [A380X/MODEL] Fixed CPT MFD DU knob animation not aligned to panel decal - @heclak (Heclak)
  70. [A380X/MODEL] Fixed protuding mesh under right wing when spoilers are moved or wing is flexing - @heclak (Heclak)
  71. [A380X/MODEL] Removed unwanted mesh in front of main landing gear - @heclak (Heclak)
  72. [A380X] Sidestick pushbuttons on CPT and FO sidesticks are made clickable - @heclak (Heclak)
  73. [A380X/MODEL] Fixed black textures on side windshield windows - @heclak (Heclak)
  74. [ATSU] Improved Hoppie ACARS connection protocol - @heclak (Heclak)
  75. [ATSU] Fixed a case where "no active atc" is returned but station is online - @heclak (Heclak)
  76. [A32NX/FMS] Fixed TOO STEEP PATH AHEAD message appearing greater than 150nm from destination - @Jonny23787 (Jonathan)
  77. [A32NX/PFD] Inhibit SPEED SEL when BRK MAX is visible on PFD - @Jonny23787 (Jonathan)
  78. [A380X/PFD] Fixed logic for the flap position display - @HarmanSingh48 (Harman)
  79. [A32NX/FWS] Improve altitude alert logic, add PFD indications, improve AP OFF warning logic - @lukecologne (luke)
  80. [A380X/FMS] Add TL indication for tailwind on APPR PERF - @Jonny23787 (Jonathan)
  81. [A32NX/FMS] Consider pilot-entered tropopause for automatic cruise temperature calculation - @BlueberryKing (BlueberryKing)
  82. [FMS] Make sure radials of CR/VR legs use the station declination as magvar - @BlueberryKing (BlueberryKing)
  83. [A32NX/FWS] Implement BAT 1(2) OFF ECAM warning - @BlueberryKing (BlueberryKing)
  84. [A380X] Fixed pink textures in 2024 SU3 caused by invalid texture size - @heclak (Heclak)
  85. [GSX] Added automatic refuel start and cargo door synchronisation for A380X, external power available synchronisation for A380X/A32NX - @Fragtality (Fragtality)
  86. [EFB/FUEL] Added total and ETA for A380X, improved state label on both aircraft - @Fragtality (Fragtality)
  87. [A380X/FWS] Added DEST EFOB & FMS SWTG memos - @BravoMike99 (bruno_pt99)
  88. [A380X/FMS] Added CHECK MIN FUEL AT DEST & DEST EFOB BELOW MIN message with associated amber EFOB color on MFD pages - @BravoMike99 (bruno_pt99)
  89. [A380X] Fixed wing taxi lights appearing black - @heclak (Heclak)
  90. [A380X] Fixed lighting issues in MSFS2024 - @heclak (Heclak)
  91. [A380X/FWS] Fix approach capability downgrade triple click - @flogross89 (floridude)
  92. [A380X/FWS] Disable startup time for runway spawns - @flogross89 (floridude)
  93. [A380X/PFD] Ignore non-running engines in flight phase 2 for rudder trim indicator visibility - @flogross89 (floridude)
  94. [EFB] Split jetway and pax stairs button in MSFS2024 to fix jetways not connecting in MSFS2024 - @heclak (Heclak)
  95. [A380X/FWS] Add PRIM abnormal sensed procedures - @BravoMike99 (bruno_pt99)
  96. [A32NX/FWS] Active warnings are no longer cleared when entering an inhibited flight phase - @tracernz (Mike)
  97. [A32NX] Fixed lighting issues in MSFS2024 - @heclak (Heclak)
  98. [FMS] Fixed a rare issue where airways failed to load - @tracernz (Mike)
  99. [A380X/FWS] Implement ENG SHUTDOWN abnornal sensed & timer countdown to timed based items - @BravoMike99 (bruno_pt99)
  100. [A380X/CDS] Implement abnormal engine parameters amber attention getting box on the EWD - @BravoMike99 (bruno_pt99)
  101. [A380X/FWS] Add several abnormal non-sensed procedures (EMER DESCENT, EMER EVAC, ...) - @flogross89 (floridude)
  102. [A380X] Improve logic and architecture for INOP SYS, LIMITATIONs and INFOs - @flogross89 (floridude)
  103. [A380X/FG] Fix VLS increasing above VAPP for CONF 3 landings - @flogross89 (floridude)
  104. [A380X/FMS] Add DCT capability to AIRWAYS page - @flogross89 (floridude)
  105. [A380X] Various fixes in FMS and ECL - @flogross89 (floridude)
  106. [A380X/SD] Fix unit conversion in SD permanent area - @flogross89 (floridude)
  107. [A380X/FMS] Fix THR RED field being dashed even though filled in - @flogross89 (floridude)
  108. [A380X/FMS] Fix decision height handling in FMS and PFD; Add NO DH/NODH/NONE/NO options - @flogross89 (floridude)
  109. [SD] Fix ISA deviation display conditions on status area - @flogross89 (floridude)
  110. [A380X/SD] Display GW, GW CG only when ZFW and ZFW CG are entered - @flogross89 (floridude)
  111. [A380X/SD] Add clamp to CABIN ALT donut - @Jonny23787 (Jonathan)
  112. [ADIRU] Added excess motion and outside latitude limit (> 82° N/S) faults - @tracernz (Mike)
  113. [ADIRU] Added quick re-align function - @tracernz (Mike)
  114. [ADIRU] Changed the IRS alignment times to actual enhanced align times - @tracernz (Mike)
  115. [A32NX/FWC] Added IRS alignment related faults and improved accuracy of time to align logic - @tracernz (Mike)
  116. [A32NX/EWD] Added support for flashing text from FWC - @tracernz (Mike)
  117. [A380X/OIT] Add initial implementation of OIT AVNCS side, including flight log and inbox page for COMPANY COM app - @flogross89 (floridude)
  118. [A380X/FG] Fix SRS disengagement conditions for eng 3&4 OEI - @flogross89 (floridude)
  119. [A380X/FMS] Add engine-out indications and behavior to FMS - @flogross89 (floridude)
  120. [A380X/Fuel] Enabled gravityfeeding and fixed crossfeed fuel usage from correct tanks - @Maximilian-Reuter (_chaoz_)
  121. [A380X/EIS] Fix malformed W glyph on the EIS display units - @tracernz (Mike)
  122. [A380X/ECAM] Add ATA 52 (DOOR) ECAM procedures (initial implementation) - @Jonny23787 (Jonathan)
  123. [A380X/FMS] Add NAV PRIMARY & NAV PRIMARY LOST scratchpad messages - @BravoMike99 (bruno_pt99)
  124. [A380X/EWD] ECL checkbox is the same color as the text color - @BravoMike99 (bruno_pt99)
  125. [A380X/OIS] Fix OOOI times logic, automatically power laptop for runway spawns - @flogross89 (floridude)
  126. [A380X/MFD] Changed colors of TCAS modes to match correct colors in A380 FCOM - @fwillard (Finn)
  127. [MODEL] Inverted behavior of FADEC GND PWR PB - @Maximilian-Reuter (_chaoz_)
  128. [A380X] Autoflight: Partially move approach and landing capability computation to FCDC - @flogross89 (floridude)
  129. [A380X/PRIM] Introduce required equipment monitoring for AUTOLAND capability - @flogross89 (floridude)
  130. [A380X/FWS] Fix cavalry charge for AP disconnect; Add improved triple click logic using FCDC signals - @flogross89 (floridude)
  131. [A380X] Autoflight: Add ROLLOUT fault (i.e. communication fault between NWS and PRIM) - @flogross89 (floridude)
  132. [A380X/CDS] Change autoland capability designation to Batch 7 standard (LAND instead of CAT) - @flogross89 (floridude)
  133. [A380X/FLIGHT and ENGINE MODELS] Fixed excessive descent rates and takeoff rotation issues, improved fuel burn - @donstim (donbikes)
  134. [FMS] Fix fuel predictions in the FMS not matching the engine model - @BlueberryKing (BlueberryKing)
  135. [A380X/PFD] Fix selected altitude not white when ROLLOUT engaged - @BravoMike99(bruno_pt99)
  136. [A380X/PFD] Fix green ARS indication appearing before flaps are in CONF 1+F - @BravoMike99(bruno_pt99)
  137. [A380X/OIT] Add systems info page for approach and landing capability equipment monitoring - @flogross89 (floridude)
  138. [A380X] Enable mouse drag for knobs in lock mode - @heclak (Heclak)
  139. [A380X] Fix some knobs snapping back to start position when turned to max value - @heclak (Heclak)
  140. [A32NX] Enable mouse drag for knobs in lock mode - @heclak (Heclak)
  141. [A32NX] Fix some knobs snapping back to start position when turned to max value - @heclak (Heclak)
  142. [ND] Fix terrain display smearing issue - @flogross89 (floridude)
  143. [MISC] Prevent long sim freezes in some scenarios in MSFS 2024 - @Benjozork (Benjamin Dupont)

Full Changelog: v0.13.0...v0.14.0

Check out latest releases or
releases around flybywiresim/aircraft v0.14.0

Don't miss a new aircraft release

NewReleases is sending notifications on new releases.

Get notifications