github ffunes/Omnibattery v1.3.0b6

latest releases: v1.6.1, v1.6.1b2, v1.6.1b1...
pre-release3 months ago

[1.3.0b6] - 2026-08-11

Added

  • Optional per-battery MAC tracking (#254): IP-based batteries can now be re-discovered through Home Assistant's DHCP integration when their router assigns a different address. Tracking is opt-in, supports automatic MAC detection with a validated manual fallback, preserves entity IDs and history during address migration, and safely ignores ambiguous shared-gateway MACs or conflicting endpoints. Thanks to @wilsto.
  • Hoymiles MQTT model profiles: the driver now detects MS-A2, HiBattery 1920 AC, HiBattery 4020 X and HiBattery 4020 AC variants from MQTT discovery and applies each model's capacity, scalability and charge/discharge envelope. The former MS-A2-only defaults are upgraded when an existing Hoymiles connection is reconfigured and discovery identifies another model. A manual model override covers firmware that publishes an incorrect or generic model. HiBattery 4020 systems currently use a symmetric 2500 W charge/discharge software ceiling; higher expansion-stack power remains out of scope for a future feature request, and the device-published MQTT envelope remains the final authority.
  • LilyGo RS485 ESPHome diagnostics: maps the firmware's diagnostic telemetry and 24 individual warning sensors into Omnibattery, including versions, network status, MOS/cell temperatures, cell-voltage delta and ESP WiFi data. Matching now accounts for ESPHome text sensors being exposed by Home Assistant under the sensor domain.

Fixed

  • Dynamic Pricing pre-slot reevaluation could overestimate grid demand: the check before each selected price slot now projects household consumption and solar remaining until midnight, skipping unnecessary slots or reducing the per-battery charge target while leaving the 00:05 daily evaluation unchanged.
  • Voltage taper could stop coupled Venus A/D packs at 3.60 V: Venus A/D now keep the tapered charge at 200 W until the debounced BMS cutoff, so a full first pack cannot leave the remaining coupled packs undercharged. After the cutoff, the integration waits 60 seconds without charging and records a one-shot cell-delta measurement with phase top_charge_bms_cutoff, including weekly full-charge runs. Venus E top-voltage behavior remains unchanged.
  • PD target grid power now scales with the configured battery fleet: the target slider follows the sum of the per-battery charge/discharge limits, applies optional system caps independently in each direction, updates without a reload, and expands the related blueprint selectors, help text and documentation for multi-battery installations. Coordinators now also expose separate physical, configured and effective limits, keeping every brand and control path aligned through effective_max_* = min(device_max_*, configured_max_*). Thanks to @waelha for the original PR (#252).

Don't miss a new Omnibattery release

NewReleases is sending notifications on new releases.