github evcc-io/evcc 0.315.0
on GitHub

4 hours ago

Changelog

Breaking Changes 🚨

  • 8661c66 Curtailment devices: new device class for feed-in limitation (BC) (#32416)
  • 0812904 Mqtt: always render preset timeout (BC) (#33084)

New Features 💫

Experimental Features 🧪

Other Changes ☀️

  • 769a6a1 API: bound jq evaluation on /api/state against unauthenticated DoS (#33028)
  • 8905c27 About modal: powered by footer for branded installations, update status badge (#33233)
  • e7b694e Afore: remove Modbus TCP option (#32964)
  • 13db309 Battery boost: resume from hold when limit is lowered (#32999)
  • 859c905 Battery control: apply battery mode per battery and only on change (#32967)
  • 0d08159 Charging plan: show strategy settings without dynamic tariff (#33168)
  • 9f70a18 Charts: prevent long-press text selection (#33012)
  • 7f33bb9 Config UI: hide disabled vehicles from loadpoint default-vehicle dropdown (#33125)
  • 1a0a05c DaheimLaden: improve error handling (#33010)
  • 063088c Demo tariffs: increase forecast to 5 days (#33174)
  • c28f2ff Digest auth: reuse challenges across requests (#32842)
  • 490f209 EEBus: apply the configured failsafe limits consistently (#33288)
  • d379b78 EEBus: clamp the curtailment percent to the documented maximum (#33300)
  • 829f11f EEBus: don't deny pairing while devices are still being configured (#32966)
  • eeb2f59 EEBus: keep pairing requests pending while devices are being configured (#33046)
  • 27bbdce Energyflow: clip collapsed details to remove phantom scroll area (#33229)
  • e4e5c2d Enovates: verify EMS mode and use actually offered current (#33163)
  • 9beca9b Go plugin: keep float parameters typed (#33162)
  • eec0a8f GoodWe: list ESA series under hybrid template (#32884)
  • 2b87fe2 Grünstromindex: fall back to co2_g_oekostrom when co2_g_standard is null (#33164)
  • e24ec1a History: keep charge and discharge apart in entity legend sums (#33299)
  • a565f2d History: show both directions for all entities of a bidirectional section (#33335)
  • 6715711 Home Assistant: auto-detect Supervisor instance and token (#33000)
  • f193eb1 Home Assistant: link charge status docs (#33260)
  • dbe100b HomeWizard: support 1p kWh meters (#33293)
  • f6e6db9 Issue: remove obsolete number input spinner styles (#33006)
  • c314e8e Keep permanent sentinel errors distinguishable (#33194)
  • ebe064a Loadpoint: disable PV mode when idle integrated device lacks surplus (#33073)
  • c106711 Loadpoint: don't reserve surplus when paused by feed-in priority (#33072)
  • 3159126 Loadpoint: ignore charge interruption during phase switch (#33109)
  • bf57d39 Loadpoint: project continuous device min power shortfall into PV disable gate (#33075)
  • 72b7e27 Loadpoint: sync charger phases on vehicle connect (#32962)
  • e2c59fc Meter (SunSpec): read max AC power from nameplate (#32732)
  • c1960b3 Metrics: fall back to power integration when a meter loses its energy register (#33103)
  • 24498ad Modbus templates: share block reads (#32887)
  • b305af0 Nissan: switch to MyNISSAN OneID authentication (#33316)
  • af4d14f OCPP: keep websocket alive between heartbeats (#33099)
  • 6b94ac6 OneKey: make mqtt timeout configurable, default 90s (#33120)
  • 8abae0f OpenDTU: tolerate missing radio_stats in energy filter (#33279)
  • ba8596b Optimizer chart: day boundaries with weekday at 00:00 (#32894)
  • 4cc75b1 Optimizer: extend horizon to 48h plus end of day (#32893)
  • 5960e9f Optimizer: limit precondition demand to required charging duration (#33137)
  • bb6854b Optimizer: respect session energy limit when vehicle soc is unknown (#32895)
  • 8d425d3 Phases: allow 1p scale-down when the loadpoint never disables (#33214)
  • 748d36d Phases: disable instead of scaling down to 1p without sufficient surplus (#32991)
  • 4adbf14 Provider auth: require authenticated session for OAuth login/logout (#33115)
  • d22b67f Reapply "Optimizer: respect session energy limit when vehicle soc is unknown (#32895)"
  • fa6f757 Revert "Optimizer: respect session energy limit when vehicle soc is unknown (#32895)"
  • 6d27652 Revert "PV: reserve only min power for higher-priority loadpoints starting up" (#32947)
  • f7b3f39 Shelly: no return energy register on gen1 relay and plug meters (#33111)
  • 47fd73b Site: feed the optimizer a trailing percentile solar scale (#32849)
  • a578893 Site: separate measurement from power calculation in update cycle (#32770)
  • b15f81a Soc: extrapolate from charged energy when vehicle api is unavailable (#33122)
  • 41319df SolarMax MAX.STORAGE: drop the whole-kWh energy register (#32986)
  • f4b289f Sponsor: include device serial in hardware check metadata (#32927)
  • 5120f26 Sungrow: remove coarse energy reading from inverter template (#33321)
  • 1b909ed Sunspec: serialize access to a shared device tree (#33014)
  • de0bac2 Sunspec: share block reads across values on the same connection (#33011)
  • defe940 Tariff (solar): resample sub-slots along the source curve (#33105)
  • 9600fc5 Tariff: make Energy Price Forecast cacheable (#33049)
  • de3f899 Templates: support class-local include files (#32871)
  • 8ccd72e UI: show inactive phases as dots in phase indicator (#33173)
  • cba812d Vehicle settings: compact rows layout (#33169)
  • adfbd05 Vehicle: don't instantiate disabled vehicles (#32919)
  • fbbe12a Voltie: only offer phase switching where the power board supports it (#33070)
  • d10ea19 Zaptec Go 2: disable phase switching with APM active (#33255)
  • 80a6231 [BUGFIX] Update url / backup example curl command (#32984)
  • 0be2e0d api: let Identify return multiple identities (#32949)
  • 1ea9c3d fox-ess-h3-smart: remove limitsoc so batterymode is applied (#33325)
  • 7d9fe8c my-PV meters: skip TLS verification for local data.jsn requests (#33003)
  • f43499e pvnode: resample against the preceding interval, not the following one (#33102)
  • 1416134 pvnode: revert to end-labelled interval resampling (#33133)
  • fd09512 warp-ws: use wss when charger URI is https (#33184)

Bug Fixes 🐞

  • e8b5477 Cardata: fix retrying failed container setup (#33243)
  • 7df861f DaheimLaden: fix firmware init (#33032)
  • 022171f Deye 3p hybrid: fix curtailed script for whole-number limits (#33161)
  • 48c125e Deye 3p hybrid: fix energy scaling for HV pre-1098 firmware (#33074)
  • cc92f39 Fix site.pvPower estimation for battery without pv (#32930)
  • b3db9e9 Fix tariff API route not matching co2 (#33166)
  • 64d48e5 Loadpoint: fix config error for disabled loadpoints (#32880)
  • b590719 SunEnergyXT 500: fix battery control (#32866)
  • 9034f45 Tesla Powerwall Fleet: fix template not selectable in ui (#32934)
  • 10c646e UI: fix blurred energy flow bar labels in Safari (#33144)
  • 1defa5f UI: fix docs links after docs site restructuring (#33160)
  • 99d9adb Zaptec: fix nil pointer panic when Capabilities observation is missing (#33304)
  • 20058f6 Zaptec: optional fix for auto-charging (#32996)
Check out latest releases or
releases around evcc-io/evcc 0.315.0

Don't miss a new evcc release

NewReleases is sending notifications on new releases.

Get notifications