• esphome: Add lint check for integer constants esphome#775
• esphome: Wizard board name fixes esphome#787 by @scop
• esphome: Logger on_message trigger esphome#729 by @Anonym-tsk
• docs: Logger on_message trigger docs#374 by @Anonym-tsk
• docs: Add Fujitsu General Climate component docs docs#307 by @31337Ghost
• docs: fix logger.rst ref link docs#379 by @glmnet
• esphome: Added more power data to the atm90e32 component esphome#799 by @CircuitSetup
• docs: added reactive power, power factor, chip temp... docs#380 by @CircuitSetup
• esphome: service uuid based ble tracking esphome#800 by @Lumpusz
• docs: Ble rssi svc docs#377 by @Lumpusz
• docs: Typo fix pzemac docs#388 by @Anonym-tsk
• docs: Typo fix pzemdc docs#389 by @Anonym-tsk
• docs: Document UART stop_bits docs#396
• docs: Document missing servo restore option docs#398
• esphome: Fix stack trace decode for latest platformio esphome#830
• esphome: Add MAX31865 sensor support, fix MAX31855 sensor esphome#832 by @DAVe3283
• docs: Add MAX31865, update MAX31855 docs#399 by @DAVe3283
• esphome: Add support for INA226 Current/Power Monitor esphome#801 by @sergio303
• docs: Add INA226 current/power monitor docs#403 by @sergio303
• esphome: implemented ruuvi_ble and ruuvitag with RAWv1 and RAWv2 protocol esphome#810 by @Alex9779 (new-integration)
• docs: added docs for ruuvitag docs#383 by @Alex9779
• esphome: http_request component esphome#719 by @Anonym-tsk (new-integration)
• docs: http_request component docs#392 by @Anonym-tsk
• esphome: fix esphome better error out esphome#843 by @glmnet
• esphome: Add climate dry fan esphome#845 by @glmnet
• esphome: Decode DHT11 decimal part esphome#861 by @airy10
• docs: add climate core docs fan, swing docs#415 by @glmnet
• esphome: fix chip_temperature for atm90e32 component esphome#865 by @CircuitSetup
• esphome: add position action and lambda - tested esphome#877 by @KristopherMackowiak
• esphome: added idle action for climate esphome#859 by @danielkucera
• esphome: Fix MAX31865 edge case. esphome#882 by @DAVe3283
• docs: Added Documentation for QMC5883L + HMC5883L Doc improvements docs#301 by @timpur
• esphome: Add QMC5883L Sensor + Improvements to HMC5883L esphome#671 by @timpur
• esphome: Add B/W support for Waveshare 2.90in (B) screen esphome#889 by @akomelj
• docs: Add B/W support for Waveshare 2.90in (B) screen docs#426 by @akomelj
• esphome: Add support for Sensirion SPS30 Particulate Matter sensors esphome#891 by @valordk (new-integration)
• docs: Add documentation for Sensirion SPS30 Particulate Matter sensors docs#424 by @valordk
• docs: Add TM1651 docs docs#429 by @freekode
• esphome: Add TM1561 support esphome#893 by @freekode (new-integration)
• esphome: Add magic value REPLACEME esphome#881
• esphome: Pulse counter validate not both disabled esphome#902
• esphome: Optimize application loop speed esphome#860
• esphome: Better/stricter pin validation esphome#903
• esphome: Disable default wait_time for rc_switch esphome#900
• esphome: Update python dependencies esphome#906
• esphome: Handle yaml merge keys correcly. esphome#888 by @edge90
• esphome: Allow loading esphome version from a fork esphome#907 by @jesserockz
• esphome: Clean up YAML Mapping construction esphome#910
• docs: Add doc for slow_pwm output component docs#427 by @nickw444
• esphome: Add slow_pwm output component esphome#894 by @nickw444 (new-integration)
• esphome: ESP32 GPIOs 33 to 38 can be used for deep sleep wakeup esphome#911 by @adamgreg
• esphome: Drop Python 2 Support esphome#793 (breaking-change)
• esphome: Add RFBridge component esphome#896 by @jesserockz (new-integration)
• docs: Add docs for RF Bridge docs#433 by @jesserockz
• esphome: ct_clamp: Check sample() return value is not NaN esphome#921 by @balrog-kun
• docs: merge all ir climates in a single doc docs#385 by @glmnet
• esphome: Climate Mitsubishi esphome#725 by @glmnet (new-integration)
• esphome: fix: only decode when not str already esphome#923 by @wilmardo
• esphome: fix climate-ir bad merge esphome#935 by @glmnet
• esphome: http_request: fix memory allocation esphome#916 by @Anonym-tsk
• esphome: http_request: version validation fix esphome#917 by @Anonym-tsk
• esphome: PID Climate esphome#885 (new-integration)
• docs: not a display component docs#462 by @glmnet
• esphome: Fix for wizard via dashboard not decoding strings esphome#941 by @timsavage
• esphome: Adding the espressif 2.6.3 esphome#944 by @Valcob
• esphome: extract and use current version of python 3 esphome#938 by @gitolicious
• esphome: Inverted output in neopixelbus esphome#895 by @voibit
• docs: Added support for inverted output in neopixelbus docs#441 by @voibit
• esphome: Added degree symbol for MAX7219 7-segment display. esphome#764 by @cyberplant
• esphome: Fix dump/tx of 64 bit codes esphome#940 by @andrasbiro
• esphome: Update hdc1080.cpp esphome#887 by @dmkif
• esphome: add tcl112 support for dry, fan and swing esphome#939 by @glmnet
• esphome: Fix SGP30 incorrect baseline reading/writing esphome#936 by @panuruj (breaking-change)
• docs: Update SGP30 for the correct eCO2 and TVOC baseline docs#458 by @panuruj
• docs: change docs to suggest logger config docs#378 by @glmnet
• esphome: Add register_*_effect to allow registering custom effects esphome#947 by @ayufan
• esphome: Bugfix/normalize core comparisons (and Python 3 update fixes) esphome#952 by @timsavage
• esphome: Add transmit pioneer esphome#922 by @kbx81
• docs: Add transmit pioneer docs#446 by @kbx81
• docs: add tm1637 docs docs#467 by @glmnet
• esphome: Display tm1637 esphome#946 by @glmnet (new-integration)
• esphome: Support a further variant of Xiaomi CGG1 esphome#930 by @mario-tux
• docs: Add Daikin IR Climate documentation docs#476 by @hectorgimenez
• esphome: Daikin climate ir component esphome#964 by @hectorgimenez (new-integration)
• esphome: fix tm1637 missing init.py esphome#975 by @glmnet
• esphome: sim800l: Add support of roaming-registered SIM cards esphome#977 by @andriej
• esphome: BME280: fix typos, use forced mode constant esphome#974 by @GMTA
• esphome: MQTT climate features esphome#913 by @puuu
• esphome: Revert default ESP32 upload baud rate esphome#978
• esphome: Add TM1651 simple level, turn on, turn off actions esphome#920 by @freekode
• esphome: Webserver - include css, js in index esphome#932 by @Elkropac
• docs: web_server - css_include and js_include: add new options and example docs#459 by @Elkropac
• docs: Add new action for TM1651 docs#442 by @freekode
• docs: Added equal symbol for MAX7219 7-segment display docs#503 by @egeltje
• esphome: Added equal symbol for MAX7219 7-segment display esphome#986 by @egeltje
• esphome: Output from platformio idedata command does not need to be decoded esphome#953 by @brandond
• esphome: Allow custom lights to be addressable esphome#954 by @brandond
• esphome: Fix esphome/issues#947 - RGBW(W) white brightness esphome#925 by @pauln
• esphome: Add support for TTGO epaper boards with B73 revision esphome#928 by @thomasklingbeil
• esphome: Fix OTA updates getting killed by task_wdt esphome#959 by @Skaronator
• esphome: Bugfix/1077 decode called on str fetching platformio stacktrace esphome#991 by @timsavage
• esphome: Add support for Tuya ceiling fan controllers esphome#989 by @buxtronix
• esphome: Fixed iBeacon struct and major and minor parsing esphome#987 by @sekkr1
• esphome: http_request http fix esphome#980 by @Anonym-tsk
• esphome: Rgbww color fix esphome#967 by @quinnhosler
• esphome: add time cover assumed_state option esphome#979 by @glmnet
• esphome: Add on_rc_switch trigger esphome#983 by @escoand
• esphome: SCD30 fixes and improvements esphome#962 by @Sizurka
• docs: cover time based add assumed state option docs#490 by @glmnet
• esphome: pzemac total energy support esphome#933 by @yekm
• docs: docs for Tuya fan, update tuya light docs#502 by @buxtronix
• docs: Next docs#491 by @CircuitSetup
• docs: add energy support to pzemac docs#478 by @yekm
• docs: Added examples for uart text sensor docs#468 by @tomludd
• docs: Add docs for TMP117 sensor docs#505 by @Azimath
• esphome: Add TMP117 component esphome#992 by @Azimath (new-integration)
• esphome: Unittests for esphome python code esphome#931 by @timsavage
• esphome: Corrections to default register values of ATM90E32 component esphome#982 by @CircuitSetup
• esphome: Support for AHT10 temperature and humidity sensor esphome#949 by @gmasse (new-integration)
• docs: Add documentation for AHT10 sensor docs#466 by @gmasse
• esphome: Retry connecting if the connection is not valid esphome#994 by @abmantis
• esphome: Support for pcd8544 (nokia 5110 and 3310) screen esphome#973 by @pax0r
• esphome: fix servo bug restoring state and starting servo detached esphome#1008 by @glmnet (breaking-change)
• docs: Documentation for PCD8544 docs#485 by @pax0r
• esphome: VSCode devcontainer support esphome#914 by @Anonym-tsk
• esphome: removes comments from lambda esphome#998 by @glmnet
• esphome: Add HM3301 laser dust detection sensor esphome#963 by @freekode (new-integration)
• docs: Add docs HM3301 docs#529 by @freekode
• esphome: Constant brightness esphome#1007 by @kroimon
• docs: Add webserver-v1.js click handlers for Cover buttons docs#521 by @balrog-kun
• esphome: web_server: Add cover calls to REST API esphome#999 by @balrog-kun
• esphome: Add AC Dimmer support esphome#880 (new-feature) (new-integration)
• docs: add ac_dimmer docs#536 by @glmnet
• docs: Add documentation for cwww and rgbww constant_brightness variables. (… docs#540 by @glmnet
• esphome: feat: Add support for MCP23016 IO Expander esphome#1012 by @reidprojects (new-integration)
• docs: feat: Added documentation to support for MCP23016 docs#537 by @reidprojects
• docs: Kristopher mackowiak next docs#544 by @glmnet
• docs: fix copy paste void docs#545 by @glmnet
• esphome: Daikin climate receiver support esphome#1001 by @puuu
• docs: ir_climate: describe daikin receive support docs#522 by @puuu
• esphome: Tests for CPP Code generation and some Python3 improvements esphome#961 by @timsavage
• esphome: Climate whirlpool esphome#1029 by @glmnet (new-integration)
• docs: add whirlpool climate docs#552 by @glmnet
• docs: add mac address info docs#554 by @glmnet
• esphome: add mac address to wifi info esphome#1030 by @glmnet
• esphome: SHTC3: Wake up the sensor during setup esphome#993 by @Sizurka
• esphome: Change buffer sending process for waveshare_epaper (2.70in) esphome#1031 by @ukewea
• docs: add light on off triggers docs docs#559 by @glmnet
• esphome: add lights on off triggers esphome#1037 by @glmnet (new-feature)
• docs: Bluetooth advertising automation docs#512 by @puuu
• esphome: Bluetooth advertising automation esphome#995 by @puuu
• esphome: Fix missing yield in ESP32 UART timeout code causing watchdog resets when blocking for serial data. esphome#1016 by @fake-name
• docs: Make initial run variable available to addressable_lambda docs#558 by @Skaronator
• esphome: Make initial run variable available to addressable_lambda esphome#1035 by @Skaronator
• esphome: Dashboard Updates esphome#1025 by @jonathanadams (new-feature) (notable-change)
• docs: remote_receiver: describe memory_block configuration docs#523 by @puuu
• esphome: esp32 remote: make RMT memory blocks configureable esphome#1002 by @puuu
• esphome: test disable no delay esphome#1026 by @glmnet
• esphome: http_request ESP32 insecure requests fix esphome#1041 by @Anonym-tsk
• esphome: Update FastLED Library 3.3.3 esphome#1020 by @teamsuperpanda
• docs: Max7219 intensity change update docs#546 by @buxtronix
• esphome: Some max7219 updates. esphome#1021 by @buxtronix
• docs: 5.83in Waveshare add docs#572 by @sredfern
• esphome: Extending Support to 5.83in Waveshare eink B/W displays esphome#1009 by @sredfern
• esphome: Allow tm1637 to use pins from IO expanders esphome#1058 by @jesserockz
• esphome: Fix fan oscillation trait not being used esphome#1048 by @blejdfist
• esphome: Update tm1637.cpp esphome#1044 by @nepozs
• esphome: dht: Fix sensor reading from DHT22 esphome#926 by @robinsmidsrod
• docs: dht: Add DHT22_TYPE2 model docs#563 by @robinsmidsrod
• esphome: Add lambda to devcontainer config esphome#1059 by @jesserockz
• docs: Ble scanner doc docs#611 by @TheKuko
• esphome: Ble scanner esphome#976 by @TheKuko (new-feature)
• docs: Update arduino framework versions docs#575 by @Skaronator
• docs: Fix pcf8574 mode docs#616 by @glmnet
• docs: Dallas autosetup docs#551 by @krahabb
• esphome: Expose mac address via discovery (mDNS) esphome#1038 by @ctalkington
• docs: ESP32 DAC output documentation docs#617 by @napieraj
• esphome: Add support for ESP32 DAC esphome#1071 by @napieraj (new-integration)
• esphome: Uart improvments esphome#1024 by @0hax (notable-change)
• docs: Uart improvments docs#571 by @0hax
• esphome: Adding support for MAX31856 Thermocouple Temperature Sensor (feature #700) esphome#1039 by @declanshanaghy (new-integration)
• esphome: Add support for additional Xiaomi BLE sensors esphome#1027 by @ahpohl (new-integration) (notable-change)
• docs: Add support for additional Xiaomi BLE sensors docs#576 by @ahpohl
• esphome: Explicitly set language to English esphome#1073 by @gitolicious
• docs: Added TTGO-Camera Plus PIN configuration docs#510 by @rudgr
• esphome: Added support for ssd1327 esphome#985 by @igg
• docs: added energy in pzem004 documentation docs#547 by @adriancuzman
• esphome: added energy reading for pzem004 esphome#1022 by @adriancuzman
• esphome: BH1750 Measurement time esphome#997 by @rradar
• docs: BH1750 Measurement time doc updates docs#515 by @rradar
• esphome: Sort keys in dicts in output yaml for 'config' command esphome#1049 by @ivan4th
• esphome: Extend uart: with rx_buffer_size: esphome#1006 by @ayufan
• docs: Document uart.rx_buffer_size docs#528 by @ayufan
• esphome: Add Prometheus /metrics-Endpoint esphome#1032 by @margau (new-feature)
• docs: Add Prometheus-Documentation docs#556 by @margau
• esphome: Turn off PN532 RF field when not expecting a tag esphome#1046 by @apeeters
• docs: Docs for CS Optional docs#644 by @igg
• esphome: making SPI CS optional esphome#988 by @igg
• esphome: AQI calculator for HM3301 esphome#1011 by @freekode
• docs: AQI calculator for HM3301 docs#535 by @freekode
• esphome: Fix gamma_correct when using constant_brightness option esphome#1043 by @Skaronator
• esphome: Add E1.31 support esphome#950 by @ayufan (new-integration)
• esphome: Add adalight light effect esphome#956 by @ayufan (new-integration)
• docs: Add documentation about E1.31, Adalight and WLED docs#646 by @ayufan
• esphome: Add WLED support esphome#1092 by @ayufan (new-integration)
• docs: PID Climate Controller docs#432
• docs: Added Etekcity Voltson cookbook docs#628 by @gitolicious
• esphome: Update docker base image esphome#1093 by @Skaronator
• esphome: SenseAir: flush input buffer on read error esphome#1017 by @ferbar
• docs: Add documentation for fan direction docs#580 by @blejdfist
• esphome: Add support for controlling fan direction esphome#1051 by @blejdfist
• esphome: Add API component to logging error message esphome#1062 by @JeffResc
• docs: Added MCP3008 docs#591 by @SenexCrenshaw
• esphome: Add MCP3008 I/O Expander esphome#1057 by @SenexCrenshaw
• esphome: ADE7953: Fix dereferencing of a null pointer esphome#1086 by @rnauber
• esphome: sgp30 baseline write bug fix (#1157) esphome#1078 by @korellas
• esphome: fix for ESP32 'Association Leave' esphome#1081 by @MasterTim17
• esphome: Climate bang bang enhancements esphome#1061 by @kbx81
• docs: Climate bang bang enhancements docs#595 by @kbx81
• esphome: Fix decode and encode for RC5-protocol esphome#1047 by @LukasK13
• esphome: Add esp8266 huzzah gpio pins esphome#1096 by @halkeye
• esphome: fix percentage handling esphome#1094 by @ssieb
• docs: Add support for command-line-substitutions docs#538 by @AlexMekkering
• esphome: Add support for command-line substitutions esphome#1014 by @AlexMekkering (new-feature)
• esphome: Add LG Climate IR esphome#1097 by @square99 (new-integration)
• docs: Add LG Climate IR docs#655 by @square99
• esphome: ESP32: Conditionally log on services to avoid OOM crashes esphome#1098 by @buxtronix
• esphome: Release BT controller unused memory in the right place esphome#1095 by @buxtronix
• docs: add documentation for component sn74hc595 docs#637 by @phjr
• esphome: add support for SN74HC595 shift register esphome#1083 by @phjr (new-integration)
• esphome: Max7219 in Dot Matrix configuration esphome#1053 by @rspaargaren
• docs: Max7219 new documentation docs#585 by @rspaargaren
• esphome: Add support for ST7789V display module (as on TTGO T-Display) esphome#1050 by @kbx81
• docs: Add documentation for ST7789V display module (as on TTGO T-Display) docs#594 by @kbx81
• esphome: Vl53 long range esphome#1055 by @rspaargaren
• docs: Update vl53l0x.rst docs#592 by @rspaargaren
• esphome: fix shunt voltage / current / power reading in INA3221 esphome#1101 by @Vxider (breaking-change)
• esphome: Fix current / power reading in INA219 esphome#1103 by @Vxider
• esphome: Fix: Component script not stopped in certain situations esphome#1004 by @balrog-kun (breaking-change)
• docs: add script.stop breaking change docs#659 by @glmnet
• esphome: Fixes esphome/issues#1192 - Save on upload bug esphome#1107 by @jonathanadams
• esphome: Revert "Climate bang bang enhancements" esphome#1106 by @glmnet
• esphome: Use default average mode in INA3221 esphome#1102 by @Vxider
• esphome: Thermostat component esphome#1105 by @kbx81 (new-integration)
• docs: Added thermostat component doc docs#665 by @kbx81
• esphome: unpin mbedtls version esphome#1114 by @glmnet
• esphome: Fix ethernet logging too many warn messages esphome#1112 by @glmnet
• esphome: add click dependency esphome#1111 by @glmnet
• docs: Add documentation for climate.pid.reset_integral_term action docs#660 by @carlos-sarmiento
• esphome: Add Integral Reset Action to PIDClimate esphome#1104 by @carlos-sarmiento
• docs: color interlock docs#653 by @peq123
• esphome: RGBWW - added channel interlock for RGB vs white esphome#1042 by @peq123
• docs: Add documentation for new WPA2-EAP authentication. docs#633 by @tomtom5152
• docs: SSD1325 documentation update for grayscale support docs#596 by @kbx81
• esphome: SSD1325 grayscale support esphome#1064 by @kbx81
• docs: Cleaned up ESP32 DAC docs docs#618 by @napieraj
• docs: Added SSD1351 doc docs#663 by @kbx81
• esphome: Add SSD1351 OLED display support esphome#1100 by @kbx81 (new-integration)
• esphome: Add cryptography requirement to the setup.py file esphome#1116 by @jesserockz
• docs: Support ssd1327 docs docs#664 by @igg
• esphome: Revert "Add ESP32 support for WPA2-EAP Enterprise WiFi authentication" esphome#1117 by @glmnet
• esphome: Revert "Add cryptography requirement to the setup.py file" esphome#1118 by @glmnet
• esphome: Install updated git version in lint image esphome#1122 by @jesserockz
• docs: documentation for version sensor hide timestamp option docs#640 by @Wauter
• esphome: fixes script wait not waiting esphome#1123 by @glmnet
• docs: Split the Tuya component documentation docs#631 by @jesserockz
• esphome: Add support for Tuya Switches esphome#1074 by @jesserockz (new-integration)
• docs: Add Tuya Switch docs docs#625 by @jesserockz
• esphome: fix script.wait action esphome#1120 by @ssieb
• esphome: Add support for Tuya Climate devices esphome#1076 by @jesserockz (new-integration)
• docs: Add Tuya Climate docs docs#632 by @jesserockz
• esphome: Add support for Tuya Sensors esphome#1088 by @jesserockz (new-integration)
• docs: Add Tuya Sensor docs docs#661 by @jesserockz
• docs: Add Tuya Binary Sensor docs docs#662 by @jesserockz
• esphome: Add support for Tuya Binary Sensors esphome#1089 by @jesserockz (new-integration)
• esphome: feature request 398 add 'hide timestamp' option for version text sensor esphome#1085 by @Wauter
• esphome: Add 7.5inch v2 waveshare esphome#1077 by @PaulAntonDeen
• docs: Added new version of 7.5inch waveshare epaper docs#675 by @PaulAntonDeen
• esphome: Move CI/CD to GitHub Actions esphome#1125 by @jesserockz
• esphome: Add PR labels based on files changed esphome#1127 by @jesserockz
• esphome: Brightness support for Nextion display esphome#1109 by @Vxider
• docs: Brightness support for Nextion display docs#668 by @Vxider
• esphome: Revert "Add PR labels based on files changed" esphome#1128 by @jesserockz
• docs: Add Toshiba climate docs#681 by @JoppyFurr
• esphome: Add support for Toshiba heat pumps esphome#1121 by @JoppyFurr (new-integration)
• esphome: Packages feature esphome#1052 by @corvis (new-feature) (notable-change)
• docs: Added documentation for packages feature docs#582 by @corvis
• esphome: Allow updating pid control params esphome#1115 by @carlos-sarmiento
• esphome: Github actions repo esphome#1130 by @jesserockz
• esphome: Feature/fix unit tests esphome#1129 by @pkuehne
• esphome: GH Actions Update esphome#1134
• esphome: Bug/fix internal flag in binary sensor esphome#1136 by @pkuehne
• esphome: Use inclusive terminology esphome#1137
• esphome: Add exposure notifications esphome#1135 (new-integration)
• esphome: Fix adding another mbedtls esphome#1131
• esphome: Tuya Sensor remove commented out code (style guide) esphome#1132
• docs: Add exposure notifications docs docs#683
• docs: Improve RGBW(W) docs docs#682
• esphome: add mqtt speed topics for fan esphome#1140 by @ssieb
• esphome: Bump pytest from 5.4.1 to 5.4.3 esphome#1144 by @dependabot[bot]
• esphome: Bump hypothesis from 5.10.4 to 5.19.3 esphome#1146 by @dependabot[bot]
• esphome: Bump protobuf from 3.11.3 to 3.12.2 esphome#1147 by @dependabot[bot]
• esphome: Bump ifaddr from 0.1.6 to 0.1.7 esphome#1148 by @dependabot[bot]
• esphome: Bump pytest-cov from 2.8.1 to 2.10.0 esphome#1145 by @dependabot[bot]
• esphome: Fix Waveshare 7.50inV2 esphome#1143
• esphome: Load setup.py requirements from requirements.txt esphome#1149
• esphome: Add pytest to CI esphome#1138
• esphome: Feature/component test fixture esphome#1142 by @pkuehne
• esphome: Use more layer caching for esphome/esphome Dockerfile esphome#1150
• esphome: Don't remove location information for packages esphome#1133
• esphome: Add tasmota magic bits to short circuit compat check esphome#1152
• esphome: Fix executable bits on some hassio files esphome#1151
• esphome: Don't run deploy job when repository is not esphome/esphome esphome#1157 by @jesserockz
• docs: Docs for Setting control parameters on PID docs#674 by @carlos-sarmiento
• esphome: Bump pytest-mock from 1.13.0 to 3.2.0 esphome#1159 by @dependabot[bot]
• esphome: Bump pylint from 2.5.0 to 2.5.3 esphome#1160 by @dependabot[bot]
• esphome: Bump tzlocal from 2.0.0 to 2.1 esphome#1162 by @dependabot[bot]
• esphome: Fix unit test warning for hypothesis deprecation esphome#1163 by @pkuehne
• esphome: Bump flake8 from 3.7.9 to 3.8.3 esphome#1161 by @dependabot[bot]
• esphome: Bump FastLED from 3.2.9 to 3.3.3 esphome#1164
• esphome: Arduino dev branch changed esphome#1139 by @glmnet
• esphome: Add bump version script esphome#1153
• esphome: fix(cover yaml validation): adds gate to coincide with Home Assistant esphome#1175 by @erasmuswill
• esphome: http_request fix urls caching esphome#1174 by @Anonym-tsk
• esphome: Fix rf_bridge send and receive esphome#1180 by @vicfergar
• esphome: mdi:timer icon replaced with mdi:timer-outline esphome#1181 by @Troon
• esphome: Bump hypothesis from 5.19.3 to 5.20.3 esphome#1176 by @dependabot[bot]
• esphome: Fix Home Assistant API disconnects when using st7789v display. esphome#1179 by @dr-oblivium
• esphome: Fixed type mismatch between result field and preference of integration sensor esphome#1178 by @FrankBakkerNl
• esphome: Feature/wizard tests esphome#1167 by @pkuehne
• esphome: Add HassIO by-id serial port paths to serial ports listing esphome#1155
• esphome: Bump NeoPixelBus from 2.5.2 to 2.5.7 esphome#1165
• esphome: Bump colorlog from 4.1.0 to 4.2.1 esphome#1183 by @dependabot[bot]
• esphome: Bump hypothesis from 5.20.3 to 5.21.0 esphome#1184 by @dependabot[bot]
• esphome: ESP8266 Disable Pin Initialization on Boot to fix pin toggling esphome#1185
• esphome: Fix dashboard logout button and py3.8 removed hmac.new digestmod esphome#1156
• docs: WPA2 Enterprise Attempt 2 docs#704
• esphome: WPA2 Enterprise Attempt 2 esphome#1158 (new-feature)
• esphome: Remove symlink_ops.py esphome#1196
• esphome: Fix senseair flush input buffer wrong log level esphome#1194
• esphome: Fix WLED minor issues esphome#1193
• esphome: Clean up UART Improvements code esphome#1190
• esphome: Partially revert make SPI CS pin optional esphome#1187
• esphome: New script modes POC esphome#1168 (breaking-change) (new-feature)
• docs: Add script modes and timers docs#693 by @glmnet
• esphome: Revert "Sort keys in dicts in output yaml for 'config' command (#1049)" esphome#1191
• esphome: Fix SN74HC595 doesn't use ESPHome HAL and add lint checks for it esphome#1188
• docs: Partially Revert make SPI CS pin optional docs#706
• esphome: Enlarge ESP32 app partitions esphome#1197
• esphome: Add CODEOWNERS mechanism esphome#1199
• esphome: rtttl player esphome#1171 by @glmnet (new-integration)
• docs: add buzzer rtttl docs docs#700 by @glmnet
• esphome: Add @glmnet components esphome#1200 by @glmnet
• docs: fix merge: climate devices moved to climate-ir docs#710 by @glmnet
• esphome: Add @jesserockz to codeowners esphome#1202 by @jesserockz
• esphome: Fix set point logging issue esphome#1201 by @kbx81
• docs: Revert "Dallas autosetup (#551)" docs#709
• esphome: Revert "Added auto discovery and setup to Dallas Platform (#1028)" esphome#1189
• docs: Update bang_bang doc, changelog fix docs#667 by @kbx81
• esphome: Update cryptography requirement from <3,>=2.0.0 to >=2.0.0,<4 esphome#1206 by @dependabot[bot]
• esphome: fix dashboard select drop down esphome#1205 by @glmnet
• docs: New prometheus configuration docs#713
• esphome: Cleanup web server prometheus integration esphome#1192