esphome/esphome 2024.3.0

on GitHub

Full list of changes

New Components

• New component: ADE7880 voltage/current/power/energy sensor esphome#5242 by @kpfleming (new-integration)
• Add Uponor Smatrix component esphome#5769 by @kroimon (new-integration)
• Support for MS8607 PHT (Pressure Humidity Temperature) sensor esphome#3307 by @e28eta (new-integration)
• Add datetime date entities esphome#6191 by @RFDarter (new-integration)
• Add AGS10 Sensor esphome#6070 by @mak-42 (new-integration)
• ads1118 component esphome#5711 by @solomondg1 (new-integration)
• Add CST816 touchscreen driver esphome#5941 by @clydebarrow (new-integration)
• AM2315C Temperature + Humidity Sensor esphome#6266 by @swoboda1337 (new-integration)
• Touchscreen: add support for CST226 controller chip esphome#6151 by @clydebarrow (new-integration)
• Drivers for RGB 16 bit parallel displays esphome#5872 by @clydebarrow (new-integration)
• VEML7700 and VEML6030 light sensors esphome#6067 by @latonita (new-integration)
• Add Seeed Studio mmWave Kit MR24HPC1 esphome#5761 by @limengdu (new-integration)
• Add driver for quad SPI AMOLED displays esphome#6354 by @clydebarrow (new-integration)
• feat: Add HTU31D Support esphome#5805 by @betterengineering (new-integration)
• Emmeti infrared climate support esphome#5197 by @E440QF (new-integration)
• Added Kamstrup Multical 40x component esphome#4200 by @cfeenstra1024 (new-integration)

New Platforms

• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)

Breaking Changes

• LTR390 - Multiple bugfixes esphome#6161 by @sjtrny (breaking-change)
• Touchscreen component and driver fixes esphome#5997 by @nielsnl68 (breaking-change)
• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)

Beta Changes

• SPI: Revert clk_pin to standard output pin schema esphome#6368 by @clydebarrow
• Allow actions in web_server to be executed via GET method esphome#5938 by @afarago
• fix servo restore esphome#6370 by @ssieb
• Don't try to get IPv6 addresses when disabled esphome#6366 by @HeMan
• Use AQI device class esphome#6376 by @fgsch
• Fix list-components when PR is not targeting dev esphome#6375 by @jesserockz
• allow negative ppm for sensair esphome#6385 by @ssieb
• microWakeWord - add new ops and small improvements esphome#6360 by @kahrendt
• Fix compilation for uponor_smatrix without time component esphome#6389 by @kroimon
• Shows component operation time in ms esphome#6388 by @edwardtfn
• IPv6 can't be enabled for libretiny esphome#6387 by @HeMan
• Replace name and friendly name in full adopted configs esphome#4456 by @jesserockz
• Fix bug in remote_base conditional esphome#6281 by @swoboda1337
• Fix sending packets to uponor_smatrix devices esphome#6392 by @kroimon
• Fix wrong initialization of vectors in ade7953_i2c esphome#6393 by @kroimon
• ld2420: Firmware v1.5.4+ bug workaround esphome#6168 by @descipher
• Require xsrf/csrf when using a password esphome#6396 by @jesserockz
• AHT10: Use state machine to avoid blocking delay esphome#6401 by @clydebarrow
• Show component warnings and errors in the log; esphome#6400 by @clydebarrow
• web_server support for v3 esphome#6203 by @RFDarter

All changes

• Bump openssh-client to 1:9.2p1-2+deb12u2 esphome#6216 by @jesserockz
• Add support for 1.8V-powered devices esphome#6234 by @bisbastuner
• Adjust HeatpumpIR dependency esphome#6222 by @ivankravets
• INA226 - fixed improper work with signed values, added configurable ADC parameters esphome#6172 by @latonita
• Prevent network config on rpipico board esphome#5832 by @carlosV2
• Bump pytest-asyncio from 0.23.3 to 0.23.5 esphome#6201 by @dependabot[bot]
• New component: ADE7880 voltage/current/power/energy sensor esphome#5242 by @kpfleming (new-integration)
• Add some components to the new testing framework (D) esphome#6175 by @kbx81
• Provide example devcontainer config for mdns and USB passthrough esphome#6094 by @linkedupbits
• Bump black from 23.12.1 to 24.2.0 esphome#6221 by @dependabot[bot]
• Bump pytest from 7.4.4 to 8.0.1 esphome#6246 by @dependabot[bot]
• Bump codecov/codecov-action from 3 to 4 esphome#6160 by @dependabot[bot]
• Bump peter-evans/create-pull-request from 5.0.2 to 6.0.0 esphome#6159 by @dependabot[bot]
• Bump frenck/action-yamllint from 1.4.2 to 1.5.0 esphome#6236 by @dependabot[bot]
• Bump voluptuous from 0.14.1 to 0.14.2 esphome#6181 by @dependabot[bot]
• Bump pyupgrade from 3.15.0 to 3.15.1 esphome#6247 by @dependabot[bot]
• LTR390 - Multiple bugfixes esphome#6161 by @sjtrny (breaking-change)
• Fix yamllint esphome#6253 by @jesserockz
• Improve the error message on OTA version mismatch esphome#6259 by @sybrenstuvel
• Bump aioesphomeapi from 21.0.2 to 22.0.0 esphome#6263 by @dependabot[bot]
• Allow ESP8266 to use multiple i2c busses esphome#6145 by @LouDou
• Add Uponor Smatrix component esphome#5769 by @kroimon (new-integration)
• Fix test_build_components for macOS sed esphome#6278 by @kbx81
• Allow to specify global build directory esphome#6276 by @werwolfby
• Add device class support to text sensor esphome#6202 by @dougiteixeira
• Bump pytest from 8.0.1 to 8.0.2 esphome#6288 by @dependabot[bot]
• Improve dualstack and IPv6 support esphome#5449 by @HeMan
• Waveshare e-ink 2IN9_V2 - fix full and partial update based on vendor… esphome#5481 by @darianndd
• Add RTTTL volume control. esphome#5968 by @nielsnl68
• Touchscreen component and driver fixes esphome#5997 by @nielsnl68 (breaking-change)
• Add on_update trigger for Project versions esphome#6298 by @jesserockz
• Bump peter-evans/create-pull-request from 6.0.0 to 6.0.1 esphome#6302 by @dependabot[bot]
• CSE7766 Apparent Power & Power Factor calculations esphome#6292 by @DAVe3283
• Adding W5500 support to ethernet component esphome#4424 by @JeroenVanOort
• Fix numbering of ip_address sensors esphome#6305 by @HeMan
• Bump aioesphomeapi from 22.0.0 to 23.0.0 esphome#6293 by @dependabot[bot]
• Add regular polygon shapes to display component esphome#6108 by @mathieu-mp
• Fix return value in core/automation.h esphome#6314 by @FlyingFeng2021
• aht10: Added new CMD and renamed existing CMD to match datasheet esphome#6303 by @cptskippy
• handling with the negative temperature in the sensor tmp102 esphome#6316 by @FlyingFeng2021
• x9c: fix off by 1 error esphome#6318 by @andynumber2
• Support for MS8607 PHT (Pressure Humidity Temperature) sensor esphome#3307 by @e28eta (new-integration)
• Separate logger implementations for each hardware platform into different files esphome#6167 by @tomaszduda23
• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• Add toggle command to cover web_server endpoint esphome#6319 by @heythisisnate
• Improv: support connecting to hidden networks esphome#6322 by @jesserockz
• Update mDNS for IDF >= 5.0 esphome#6328 by @HeMan
• DFPlayer: refix Bug created with PR 4758 esphome#5861 by @sandronidi
• Fix build failures on host platform caused by #6167 esphome#6338 by @clydebarrow
• Update bang_bang to log two decimal places in config dump esphome#6304 by @rafalw1277
• Add datetime date entities esphome#6191 by @RFDarter (new-integration)
• Add AGS10 Sensor esphome#6070 by @mak-42 (new-integration)
• Bump aioesphomeapi from 23.0.0 to 23.1.0 esphome#6332 by @dependabot[bot]
• Bump pytest-asyncio from 0.23.5 to 0.23.5.post1 esphome#6334 by @dependabot[bot]
• Bump docker/setup-buildx-action from 3.0.0 to 3.1.0 esphome#6295 by @dependabot[bot]
• Set dependabot to look at composite actions versions esphome#6343 by @jesserockz
• ads1118 component esphome#5711 by @solomondg1 (new-integration)
• Bump actions/cache from 4.0.0 to 4.0.1 esphome#6306 by @dependabot[bot]
• Bump docker/build-push-action from 5.0.0 to 5.2.0 in /.github/actions/build-image esphome#6347 by @dependabot[bot]
• fix: modbus_textsensor response is too long in some cases esphome#6333 by @NewoPL
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)
• dump config after logging CDC port is opened by host esphome#6169 by @tomaszduda23
• Add IRK support to allow tracking of devices with random MAC addresses esphome#6335 by @chbmuc
• [Fingerprint_grow] Implements Sleep Mode feature esphome#6116 by @alexborro
• cleanup ili9xxx component by removing data rate define esphome#6350 by @nielsnl68
• web_server_idf: support x-www-form-urlencoded POST requests esphome#6037 by @dentra
• feat(MQTT): Add QoS option for each MQTT component esphome#6279 by @Rapsssito
• Check permissions esphome#6255 by @OdileVidrine
• Add CST816 touchscreen driver esphome#5941 by @clydebarrow (new-integration)
• ILI9XXX: Lazily allocate buffer esphome#6352 by @clydebarrow
• AM2315C Temperature + Humidity Sensor esphome#6266 by @swoboda1337 (new-integration)
• Add ble_presence binary sensor timeout config value. esphome#6024 by @clydebarrow
• Add state listeners to rotary_encoder esphome#6035 by @clydebarrow
• ili9xxx: Add support for GC9A01A display esphome#6351 by @clydebarrow
• Touchscreen: add support for CST226 controller chip esphome#6151 by @clydebarrow (new-integration)
• font: add anti-aliasing and other features esphome#6198 by @clydebarrow
• Mhz19 warmup esphome#6214 by @fornellas
• Refactor ATM90E32 to reduce blocking time and improve accuracy. esphome#5670 by @descipher
• Bump aioesphomeapi from 23.1.0 to 23.1.1 esphome#6348 by @dependabot[bot]
• Bump pytest from 8.0.2 to 8.1.1 esphome#6346 by @dependabot[bot]
• Add support for Waveshare 2.13" V2 display esphome#6337 by @manuelkasper
• Mitsubishi Climate updates esphome#3886 by @RubyBailey
• Drivers for RGB 16 bit parallel displays esphome#5872 by @clydebarrow (new-integration)
• hydreon_rgxx - add resolution option esphome#6077 by @mrtoy-me
• SPI schema now uses typed_schema with type key esphome#6353 by @clydebarrow
• VEML7700 and VEML6030 light sensors esphome#6067 by @latonita (new-integration)
• Add Seeed Studio mmWave Kit MR24HPC1 esphome#5761 by @limengdu (new-integration)
• Add getter for font glyph data esphome#6355 by @clydebarrow
• Require reset_pin for certain waveshare_epaper models in YAML validation esphome#6357 by @manuelkasper
• touchscreen driver fixes esphome#6356 by @clydebarrow
• Make USE_HOST compilable on msys2 esphome#6359 by @maruel
• download font from url on build esphome#5254 by @landonr
• Add driver for quad SPI AMOLED displays esphome#6354 by @clydebarrow (new-integration)
• ADE7953: Add the ability to use accumulating energy registers, more precise power reporting esphome#6311 by @isorin
• feat: Add HTU31D Support esphome#5805 by @betterengineering (new-integration)
• Emmeti infrared climate support esphome#5197 by @E440QF (new-integration)
• Added Kamstrup Multical 40x component esphome#4200 by @cfeenstra1024 (new-integration)
• add possibility to provide different conversion times for Bus Voltage… esphome#6327 by @kev300
• SPI: Revert clk_pin to standard output pin schema esphome#6368 by @clydebarrow
• Allow actions in web_server to be executed via GET method esphome#5938 by @afarago
• fix servo restore esphome#6370 by @ssieb
• Don't try to get IPv6 addresses when disabled esphome#6366 by @HeMan
• Use AQI device class esphome#6376 by @fgsch
• Fix list-components when PR is not targeting dev esphome#6375 by @jesserockz
• allow negative ppm for sensair esphome#6385 by @ssieb
• microWakeWord - add new ops and small improvements esphome#6360 by @kahrendt
• Fix compilation for uponor_smatrix without time component esphome#6389 by @kroimon
• Shows component operation time in ms esphome#6388 by @edwardtfn
• IPv6 can't be enabled for libretiny esphome#6387 by @HeMan
• Replace name and friendly name in full adopted configs esphome#4456 by @jesserockz
• Fix bug in remote_base conditional esphome#6281 by @swoboda1337
• Fix sending packets to uponor_smatrix devices esphome#6392 by @kroimon
• Fix wrong initialization of vectors in ade7953_i2c esphome#6393 by @kroimon
• ld2420: Firmware v1.5.4+ bug workaround esphome#6168 by @descipher
• Require xsrf/csrf when using a password esphome#6396 by @jesserockz
• AHT10: Use state machine to avoid blocking delay esphome#6401 by @clydebarrow
• Show component warnings and errors in the log; esphome#6400 by @clydebarrow
• web_server support for v3 esphome#6203 by @RFDarter