• support modifying the apds9960 settings esphome#3708 by @ssieb
• Add support for pvvx mithermometer display via ble client esphome#3333 by @puuu
• Improve OTA error messages adding return codes esphome#3698 by @IgnacioHR
• Send CR also for commands for sim800l esphome#3719 by @ssieb
• hydreon_rgxx: Support lens_bad, em_sat and temperature esphome#3642 by @functionpointer
• wifi: support 802.11k and 802.11v esphome#3600 by @stintel
• Add final validate for i2c with mix/max frequency esphome#3727 by @jesserockz
• Add dps310 sensor support esphome#3704 by @kbx81 (new-integration)
• Let favicon be cached esphome#3729 by @slovdahl
• Add bitmap font support esphome#3573 by @justfalter
• add log messages for bad pronto codes esphome#3738 by @ssieb
• add color compare operator's esphome#3730 by @nielsnl68
• Support for MCP9600 Thermocouple Amplifier esphome#3700 by @MrEditor97 (new-integration)
• Support high update rates and fix several bugs in the cse7766 component. esphome#3675 by @fhriley
• Add Prometheus metrics relabeling esphome#3734 by @jangrewe
• mcp23017: read output latch registers during setup esphome#3744 by @andyboeh
• Captive portal show nearby WiFi with no ssid configured esphome#3748 by @anatoly-savchenkov
• Remove unnecessary schema extension on template button esphome#3753 by @jesserockz
• Tidy up switch schemas esphome#3754 by @jesserockz
• Add IP101 support to Ethernet component esphome#3751 by @kbx81
• Add BedJet Fan child component esphome#3735 by @jhansche
• ibeacon support for the ble_rssi sensor esphome#3745 by @wjtje
• Add AEHA IR Protocol esphome#3726 by @hazi
• Add sum type to binary_sensor_map esphome#3541 by @fbrthld
• Bump aioesphomeapi from 10.11.0 to 10.13.0 esphome#3740 by @dependabot[bot]
• Bump pylint from 2.14.5 to 2.15.0 esphome#3746 by @dependabot[bot]
• Esp32 pulsecounter optional pcnt esphome#3691 by @RoboMagus
• Bump black from 22.6.0 to 22.8.0 esphome#3760 by @dependabot[bot]
• Various ili9341 fixes esphome#3756 by @nielsnl68
• Add the same docker tags as used in HA esphome#3752 by @andrey-yantsen
• Bump pytest from 7.1.1 to 7.1.3 esphome#3766 by @dependabot[bot]
• Remove unneeded line (spi component adds it) esphome#3778 by @jesserockz
• Move crc16 to helpers esphome#3780 by @jesserockz
• YAML linting esphome#3779 by @jesserockz
• Add support to tm1621 display esphome#3737 by @Philippe12 (new-integration)
• u-fire EC sensor esphome#3774 by @pvizeli (new-integration)
• Add support for MPL3115A2 Pressure/Altitude and Temperature Sensor esphome#3371 by @kbickar (new-integration)
• Add support for BL0942 voltage, current, energy and power Sensor esphome#3777 by @dbuezas (new-integration)
• Bump pylint from 2.15.0 to 2.15.2 esphome#3785 by @dependabot[bot]
• Add Factory Reset button and switch esphome#3724 by @anatoly-savchenkov (new-integration)
• [MPU6050] Support devices with WHOAMI 0x98 esphome#3784 by @CarlosGS
• Bump zeroconf from 0.39.0 to 0.39.1 esphome#3782 by @dependabot[bot]
• Add support for TM1638 Led and Key component esphome#3340 by @skykingjwc (new-integration)
• Remove status_set_error from ufire_ec esphome#3792 by @pvizeli
• Bump frenck/action-yamllint from 1.2.0 to 1.3.0 esphome#3798 by @dependabot[bot]
• esp32_ble_tracker continuous and one shot scanning modes esphome#3649 by @jonofmac
• Add stop action for ble scanning esphome#3799 by @jesserockz
• Add Prometheus Service Discovery for online devices esphome#3788 by @cznewt
• Allow ble tracker to subscribe to ota start and stop the scanning esphome#3800 by @jesserockz
• Add uFire ISE sensor esphome#3789 by @pvizeli (new-integration)
• fix spi timing issues esphome#3763 by @IgnacioHR