Changes since v3.0.0
- setup: complete overhaul of the UI flow to be less ADS-B centric
- setup: ask the user for their initials and provide ACARS/VDL2/HFDL/AIS feed ids that match the proposed pattern if the user doesn't provide their own
- setup: show closest airport on basic setup page, based on lat/long data entered (this should help detect mistakes when entering the location and is used in the feed ids)
- acars/vdl2: offer location specific frequencies as a starting point for the user
- acars/vdl2: use librtlsdr instead of soapy for RTLSDR support
- acars/vdl2: changes to sample rates used and therefore frequency spread supported
- vdl2: allow specifying frequencies as list of space separated MHz values
- acars: reduce bandwidth / allow biastee when using airspy mini (R2 not supported, rtl-sdr generally recommended)
- acars: support biastee with RTLSDR
- acarshub: add option to always have data on disk
- acars2pos: update to fix delayed message processing
- acars2pos: disable logging to disk
- hfdl/SDRplay: correct the acceptable gain values
- update DietPi based images to 9.15
- update containers to latest version
- core: add WiFi scanning to system management (similar to hotspot functionality)
- core: while 'secure image' is activated, wifi config hotspot will remain disabled
- core: add setting to disable wifi config hotspot
- ais: fix incorrect HPRadar feed setup
- core: add support for TEMPer USB temperature sensors on all platforms
- core: restrict temperature sensor support to feeder image mode only (so not in app mode) and install dependencies if missing
- core: improve temperature sensor support with full support on the Raspberry Pi 5; add support for DHT11 and experimental / best effort support for BME280
- UI: allow the user to show the temperature in Fahrenheit
- UI: don't offer to update the WiFi connection when running in a VM
- UI: adjust temperature block colors for dark mode and fade them more slowly as the temperature information ages
- UI: allow the user to choose the temperature sensor that they have and specify the GPIO that it is connected to (for DHT11/22)
- UI: prevent menu bar wrapping on small displays if temperature is enabled
- UI: improve styling and consistency of system management and hotspot UI
- UI: data sharing: add some visual separation / grouping to this rather busy page
- UI: data sharing/adsb: move MLAT privacy to be part of the account less aggregator setup (where it belongs)
- UI: password setting: improve readability / ensure password auth is enabled
Note
Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server
Warning
Images can take more than 5 minutes before the web interface is available. Please be patient.
Note
Currently the Odroid image and the default LePotato images do NOT support WiFi. For the default Raspberry Pi image (but not the new Raspbian image for LePotato), WiFi can be configured with the Pi Imager when you write the image to SD-card, DietPi based images do support WiFi, but they require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.
Alternatively, if there is no network connection detected, all WiFi enabled images will create a hotspot named adsb.im-feeder. You can then connect to that hotspot and set up SSID/password of the access point you want the feeder to connect to.
For Raspberry Pis there are multiple images available. For most users the Raspbian based adsb-im-raspberrypi64-pi-2-3-4-5-v....img.xz is likely the best choice, but there are also two DietPi based images available for those who prefer that.