Development build for testing on an MHO900. Not a release. mho-dev-20 with two fixes; use this one. Not yet
verified on hardware.
mho-settings.pysets the memory depth again before each channel: the stock system switched to 1 M points after
50 ms/div and kept them, so CH2 to CH4 of a recording were taken at another depth (an MHO934, issue #248).
Recordings of dev-19 still work.- The screen reads deep records whole (up to 1 M points), so settings recorded at 1 M points fill the screen.
The steps are those of mho-dev-20 (issue #4): record mho-settings.py under the stock system, install this build,
copy the recording to /oos/mho-settings.txt, oos-mho-live, then turn the V/div and time base knobs.
| File | What |
|---|---|
oos-mho900-dev-21.img
| the OOS image, for the install on a second card (boot/card-install.py, then boot/switch.py oos)
|
oos-mho900-dev-21.oosupd
| the same image as a signed package, for the install over ADB (oos-update gel-install)
|
oos-update-mho-dev-21
| the install tool of this build, for the scope (aarch64) |
oos-fpgad-mho-dev-21
| this build's oos-fpgad alone
|
mho-check.py, mho-settings.py, mho-poll
| the recording tools |
MHO900_OOS_Install.GEL
| the stick install. Not known whether the stock MHO900 update accepts it. Use the ADB or card route |
SHA256SUMS
| checksums |
Built from tag mho-dev-21 (build 20261122-213042) with kernel/build-base.sh (the kernel of mho-dev-10) and OOS_BOARD=mho boot/build-dev-image.sh, Linux 6.12.115. Sources: this tag, and the third-party sources of v0.1.14.