Development build for testing on an MHO900. Not a release. The screen's keys set the board. Not yet
verified on hardware.
With your unit's mho-settings.py recording (from mho-dev-19 or this release) copied to /oos/mho-settings.txt,
the screen's channel, scale and time base set the board: the first channel on is measured, its V/div and the
time base go to the nearest setting the stock system recorded on your unit. One channel at a time for now; the
trigger level and offset don't follow yet. Without the file the board stays at the snapshot's setting, as in dev-18.
- Under the stock system:
python3 mho-settings.py <scope-ip>(about 12 minutes, nothing connected). - Install this build, keep the snapshot in
/oos, copy the recording:scp mho-settings-*.txt root@<scope>:/oos/mho-settings.txt, remove an older/oos/bin/oos-fpgad. ssh root@<scope> oos-mho-live, connect the probe compensation signal, switch its channel on (and only it), then
turn the V/div and time base knobs.
| File | What |
|---|---|
oos-mho900-dev-20.img
| the OOS image, for the install on a second card (boot/card-install.py, then boot/switch.py oos)
|
oos-mho900-dev-20.oosupd
| the same image as a signed package, for the install over ADB (oos-update gel-install)
|
oos-update-mho-dev-20
| the install tool of this build, for the scope (aarch64) |
oos-fpgad-mho-dev-20
| this build's oos-fpgad alone
|
mho-check.py, mho-settings.py, mho-poll
| the recording tools, as in mho-dev-19 |
MHO900_OOS_Install.GEL
| the stick install. Not known whether the stock MHO900 update accepts it. Use the ADB or card route |
SHA256SUMS
| checksums |
Built from tag mho-dev-20 (build 20261122-211641) with kernel/build-base.sh (the kernel of mho-dev-10) and OOS_BOARD=mho boot/build-dev-image.sh, Linux 6.12.115. Sources: this tag, and the third-party sources of v0.1.14.