github dashdogy/MFG-Unlocker v1.7.0
Universal MFG Unlocker - V1.7.0

latest release: v1.7.1
22 days ago

V1.7.0 adds DLSS 5 to the menu, XeSS MFG without OptiScaler (experimental), a reworked XeMFG pacing that removes the stutter many games had, and MFG Unlocker's menu beside OptiScaler for the DLSS presets and DLSS 5. It also brings every fix from the V1.6.2 and V1.7.0 test builds.

To update, close the game and replace the installed MFGUnlocker.dll (or MFGUnlocker.asi in OptiScaler\plugins) with the new one, keeping its filename. Your settings carry over. With OptiScaler, also take our OptiScaler build, OptiScaler for MFG Unlocker V1.7.0 (see OptiScaler below).

Changes since V1.6.1

DLSS 5

  • A DLSS 5 tab in the menu. It appears when NVIDIA's DLSS 5 dll (nvngx_dlssnr.dll) is beside the game's executable or MFG Unlocker, and applies DLSS 5 in games that run DLSS Super Resolution, DLAA or Ray Reconstruction. MFG Unlocker does not include or download the provider.
  • Hook Method sets where DLSS 5 runs: Auto, Before upscaling, After upscaling or Present (DirectX 12). In Vulkan games it runs After upscaling or Auto.
  • Look (Subtle, Balanced or Strong; Balanced is the provider's own default), Intensity, Model and Faces & skin. Resolution Scale has an Auto mode that lowers it to keep DLSS 5 within its budget, never below 75 %, and changes it without a visible gap. Advanced has much more: Structure, Tone and Faces & skin up to 2, extra passes with their own model, blending, a highlight guard, halo reduction, edge-aware upsampling, area supersampling, an HDR knee, debug views and a split view.
  • Half rate runs the DLSS 5 network on every other frame for about half the cost, and carries its look to the frames in between (DirectX 12, Before or After upscaling).

XeMFG standalone (experimental)

  • XeSS Multi Frame Generation without OptiScaler, in DirectX 12 and Vulkan games. Put Intel's libxess_fg.dll and libxell.dll (XeSS SDK 3.0.2 is tested) in a folder named RTXMFG-XeSS beside MFG Unlocker, tick XeMFG standalone in the menu, restart the game and pick 2x to 6x or Dynamic (target, rounding, Allow 1X, Use target as cap).
  • In games with DLSS Frame Generation, turn it on in the game: XeMFG takes its place and uses its inputs, including the HUD-less image. Other games need DLSS, XeSS or FSR 3.1 (or newer) upscaling on. The Reflex FPS limit, the DLSS presets, DLSS 5 and an FPS readout (real and XeMFG frames) work alongside it. If the XeSS files are missing or misnamed, the menu says where it looked.

OptiScaler

  • MFG Unlocker's menu beside OptiScaler. While the game runs DLSS Super Resolution, DLAA, Ray Reconstruction or DLSS 5, MFG Unlocker's menu shares the screen with OptiScaler's and offers the DLSS presets and DLSS 5. Frame generation stays in OptiScaler's menu. Forza Motorsport and Forza Horizon keep it hidden (they ended at startup with it in a test build). To hide it in every game, set "optiScalerUi": "optiscaler" in RTXMFG-Universal.json.

  • The menu also appears when only XeFG's own swap chain can carry it (Honkai: Star Rail), shows once instead of twice with OptiScaler's XeFG in Vulkan games, keeps its own cursor above it, and follows the mouse smoothly while frame generation runs.

  • Our OptiScaler build: OptiScaler for MFG Unlocker V1.7.0 (dashdogy/OptiScaler, release mfgunlocker-v1.7.0, source branch mfgunlocker). Install OptiScaler as usual from its nightly-20261024, then replace OptiScaler.dll with the one from that release, keeping the name it was installed under. Stock OptiScaler does not have these yet, until they are upstreamed:

    • FGOutput = XeFG in Vulkan games, with any FGInput (Upscaler or DLSSG): XeMFG in Vulkan games needs this build (Arknights: Endfield).
    • FGInput = DLSSG in games that check DLSS Frame Generation at startup: Doom: The Dark Ages no longer greys out its Frame Generation option.
    • FGOutput = XeFG in DirectX 12 games: OptiScaler's menu and FPS overlay no longer hold the game in Present.
    • FGInput = FSRFG or FSRFG30 (the game's own FSR Frame Generation): XeFG leaves the swap chain to it, and the game's UI still shows while frame generation is off (Modern Warfare 4).

    DLSS MFG through OptiScaler, and XeMFG in DirectX 12 games with the Upscaler input, also work with a current upstream OptiScaler 10 build.

XeMFG pacing

  • A new flip queue presents each batch of XeMFG frames on an even cadence, and each batch's first frame as soon as it is ready. That removes the stutter and the frame rate loss many games had. It follows in-game V-Sync and VRR. On NVIDIA it works with the driver's flip metering; on AMD Radeon RX 7000 and RX 9000 with Adrenalin 26.10.1 or newer it drives the driver's flip meter with the batch's frame count. Radeon RX 6000 and older, and Wine/Proton, keep V1.6.1's pacing. To go back to V1.6.1's pacing on any GPU, set XeFGFlipQueue = off under [XeFG] in OptiScaler.ini.
  • Fixes for 5x and 6x on AMD (frames arrived in bursts), for games the queue itself held back, for backlogged presenters, for Linux with XeLL's frame limit, and for swap chains XeFG cannot enlarge.
  • XeFG's swap chain gets 10 buffers by default, up to 16, with an OptiScaler build that has the matching menu fix (older builds keep 8).
  • XeFG's HDR10 handling is off: very bright HDR displays showed interpolation errors in the brightest areas. XeFGHdr10Flag = stock under [XeFG] restores it.
  • On AMD, Intel's own versions of two XeFG programs are kept where they are faster.
  • The Page Up flip metering toggle is gone. XeFGFlipMetering = off still turns flip metering off.

RTX 30 and RTX 20

  • DLSS Frame Generation starts when the game's Streamline allocated fewer frame buffers than MFG Unlocker expected; the menu then offers the modes those buffers hold (Final Fantasy VII Rebirth on an RTX 2070 SUPER, fixed per the tester).
  • When DLSS Frame Generation can't start, MFG Unlocker now tells Streamline to keep it off instead of letting Streamline retry it every frame. In Doom: The Dark Ages on an RTX 3080 Ti, video memory grew to 41 GB while those retries ran, until the game crashed. There is no new menu text.
  • DLSS Frame Generation stays available when NVIDIA's runtime answers Streamline's startup check with an error (Final Fantasy VII Rebirth, GitHub issue 106).
  • The menu's DLSS Frame Generation preset row shows the preset in use instead of "waiting for the provider" (issue 107).
  • The XeMFG tensor core route switches itself off when one of its GPU driver calls faults (reported in Ghost of Tsushima on an RTX 2060).

Also

  • The Reflex FPS limit works with Streamline Reflex 2.7 to 2.14 (Wuthering Waves reported "The loaded Reflex plugin version is unsupported.").
  • DLSS works when another tool has hooked NVIDIA's NGX entry points first (S.T.A.L.K.E.R. 2, issue 115).
  • The DLSS status says DLAA when the game renders at the output resolution (issue 112).
  • Crash reporters (UnityCrashHandler, CrashReportClient, crashpad_handler, REDEngineErrorReporter) and programs run from the Windows folder are left alone (issues 111 and 116).
  • A French menu translation, thanks to Slideulidou.
  • The log has timestamps and an environment header, writes a crash record with a minidump (*.crash.dmp) beside it, ends with a Session end line, and keeps one more previous log (*.previous2.log).
  • The NVIDIA game list was checked on 25 October 2026; it has not changed since V1.6.1.

Known issues

  • With OptiScaler's XeFG in Vulkan games, the flip queue stays on and can cost frame rate. Set XeFGFlipQueue = off if that happens.
  • With ReShade's dxgi.dll, XeFG's swap chain cannot be enlarged, and at 5x and 6x some generated frames do not reach the screen.
  • Half rate is not available in Vulkan games or with the Present hook method.
  • In HDR games, DLSS 5 itself still moves lit skin slightly redder.
  • XeMFG standalone is experimental: in Vulkan games it only uses DLSS upscaling inputs, games with display-resolution motion vectors are not supported, FSR 2 and FSR 3.0 built into a game cannot be read, and without a HUD-less image the HUD is interpolated with the scene.

MFGUnlocker-v1.7.0.zip contains only MFGUnlocker.dll. Press Backspace to open the menu. See the README for installation, supported filenames, XeMFG standalone and OptiScaler setup. SHA-256 checksums for the ZIP and the extracted DLL are attached.

Licence note: MFGUnlocker.dll embeds XeSS Frame Generation program data derived from Intel's XeSS SDK (DXIL, and SPIR-V translations for Vulkan). That data is Intel's work, is not covered by the MIT License, and remains subject to Intel's licence terms. See NOTICE.md. MFG Unlocker does not include Intel's XeSS runtime, NVIDIA's DLSS 5 provider or OptiScaler; our OptiScaler build is a separate GPL-3.0 download from the fork linked above.

Please send your logs if something does not work. Enjoy :D

Don't miss a new MFG-Unlocker release

NewReleases is sending notifications on new releases.