github cvhviz/CAIRN cairn-v137
Cairn 137

latest release: experimental-heltec-v4-137
one hour ago

Cairn 137 lets you move the cursor inside a message, makes text easier to read over a wallpaper, adds photo uploads to the ThinkNode M9, and fixes three M9 problems: Shift chords that cleared the message, Trip buttons you couldn't select, and a map selection Back couldn't clear.

Highlights:

  • Move the cursor inside your message (L2 Pro, Heltec V4 touch, ThinkNode M9, T-Deck, T-LoRa Pager; not the T-Display SF32). Typing, Del, holding Del and Paste all work where the cursor is, so you can fix a typo without deleting back to it.
    • Keyboard boards (M9, T-Deck, T-LoRa Pager): Left / Right move one letter, Up / Down move one line and keep the same spot. Down from the last line goes to the Send row, and Up comes back to the text.
    • Touch boards (L2 Pro, Heltec V4 touch): tap in the text to put the cursor there. When a long message is cut off with "…", tap the "…" to jump to that end.
  • Easier to read over a wallpaper. List rows (Chats, Nodes and the pickers) now get the same frosted background as Home's cards. On Home, the date, uptime, sunrise / sunset, temperature and channel each sit on a small frosted chip, so they stay readable on a busy or bright picture.
  • ThinkNode M9: Photos and Files in Wi-Fi transfer. Settings › Network › Wi-Fi transfer now lets you send pictures from your phone or computer's browser to the M9's card, for the wallpaper and the Photos screensaver. There's no Music tab, since the M9 has no speaker.
  • ThinkNode M9: Shift + a letter no longer clears your message. Pressing Shift and a letter at the same moment (Shift+C, Shift+E, Shift+R…) could erase the word before the cursor, or the whole line. The M9's keyboard sends an extra code on those chords, which Cairn read as "delete word". That code is now ignored, and holding Del still deletes as before.
  • ThinkNode M9: the Trip page's buttons can be selected with the keys: Record, Logs, New trip and a saved trip's Delete. Reported in #57.
  • Map: Back clears a selected contact. With a contact selected on the map, Back now hides its info card and route first. A second Back leaves the map as before. Tapping an empty spot on a touch screen still works too. Reported in #58.

Changed

  • The message cursor, wallpaper legibility, M9 Photos / Files, the M9 Shift fix, Trip buttons, Back on the map (see above).

Checked: built from one tree for every board. Each file was checked for the build number and date, and the release has the same set of files as 136. On the bench, the M9 Shift fix was checked against the M9 keyboard's raw codes, and the cursor was used on an M9 (arrows) and an L2 Pro (taps). The frosted rows and Home chips were checked on an L2 Pro and in the simulator for the other boards. The Trip page's focus and the map's Back were checked on the M9 layout in the simulator; the map one hasn't been run on an M9 with a located contact yet. With no wallpaper set, the M9's screens were compared page by page in the simulator before and after, and are unchanged. The L1 family, the one-button boards, the repeaters and the T-Display SF32 are rebuilt with no change but the build number.

Update

  • On Cairn 108 to 136 (L2 Pro, Heltec V4 touch on either kit, ThinkNode M9, T-Deck, T-Display SF32, T-LoRa Pager): Settings › System › Firmware update: Check, Download, Install. The new build starts on trial and goes back to the old one by itself if it fails to start. On the T-Display SF32, dock the core on the keyboard board first (it carries the Wi-Fi chip).
  • T-Deck started from an SD-card launcher: don't use Update on 121 or earlier (122 and later are fine). Copy MeshCore-TDeckPlus-Cairn137-2026-11-18-update.bin to the card and install it from the launcher, as you installed Cairn.
  • Over USB on an ESP32 board: the -full.bin goes at 0x0, after Erase Flash, and erases everything. The -update.bin goes at 0x10000 and keeps your data. If the board last updated over Wi-Fi, clear the boot selector first, as in the ESP32 install guide.
  • Heltec Wireless Tracker V2 and V4-R8 (OLED) companions: update with the -ble-update.bin at 0x10000; these two don't update over Wi-Fi. A first install is the -ble-full.bin at 0x0 after an erase (back up your node's private key from the app first if the board runs MeshCore or Meshtastic now). Files with -repeater in the name are the repeater, not the companion.
  • Wio Tracker L1 Pro, DV1, L1 e-ink, the room server, the T096 and the T114: double-tap Reset and copy the board's .uf2 onto the drive that appears (UF2 guide), or use the Cairn app's Firmware Update over Bluetooth. Updating keeps your identity, contacts, channels and settings.
  • Compact repeaters: write the -repeater-update.bin at 0x10000, or copy the -repeater.uf2. They don't update over Wi-Fi.
  • T-LoRa Pager: pick the file for your radio (it's on the box and the back label). SX1262 units take TLoraPager, LR1121 units take TLoraPagerLR1121; the wrong one runs but has no radio. The online update keeps to the radio you installed.
  • A board without Cairn: write the board's -full.bin (ESP32 install guide), copy the .uf2 (UF2 guide), or run the SF32 installer (SF32 install guide).

Downloads

Board File Use
Seeed Wio Tracker L2 Pro MeshCore-WioL2Pro-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-WioL2Pro-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
Heltec V4-R8 + Expansion Kit V2 (touch) MeshCore-HeltecV4Touch-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-HeltecV4Touch-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
Heltec V4 + Expansion Kit V1 (touch) MeshCore-HeltecV4KitV1-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-HeltecV4KitV1-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
Heltec Wireless Tracker V2 (companion) MeshCore-HeltecTrackerV2-Cairn137-2026-11-18-ble-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-HeltecTrackerV2-Cairn137-2026-11-18-ble-update.bin update over USB at 0x10000
Heltec WiFi LoRa 32 V4-R8, OLED (companion) MeshCore-HeltecV4R8-Cairn137-2026-11-18-ble-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-HeltecV4R8-Cairn137-2026-11-18-ble-update.bin update over USB at 0x10000
Elecrow ThinkNode M9 MeshCore-ThinkNodeM9-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-ThinkNodeM9-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
Elecrow ThinkNode M9, USB companion MeshCore-ThinkNodeM9-Cairn137-2026-11-18-usb-full.bin the app over the USB cable (and Bluetooth): first install over USB, at 0x0 (erases everything)
MeshCore-ThinkNodeM9-Cairn137-2026-11-18-usb-update.bin over USB at 0x10000, keeps your data. Online update installs the Bluetooth build, so stay on USB by flashing this by hand
LilyGO T-Deck / T-Deck Plus MeshCore-TDeckPlus-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything, and removes a launcher)
MeshCore-TDeckPlus-Cairn137-2026-11-18-update.bin update over Wi-Fi, over USB at 0x10000, or from a launcher's SD card
LilyGO T-LoRa Pager (SX1262, most units) MeshCore-TLoraPager-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-TLoraPager-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
LilyGO T-LoRa Pager (LR1121) MeshCore-TLoraPagerLR1121-Cairn137-2026-11-18-full.bin first install or recovery over USB, at 0x0 (erases everything)
MeshCore-TLoraPagerLR1121-Cairn137-2026-11-18-update.bin update over Wi-Fi, or over USB at 0x10000
LilyGO T-Display SF32 + keypad MeshCore-TDisplaySF32-Cairn137-2026-11-18-install.zip install over USB, with the included installer
MeshCore-TDisplaySF32-Cairn137-2026-11-18-update.bin the app image (and its .sha256)
Seeed Wio Tracker L1 Pro MeshCore-WioL1Pro-Cairn137-2026-11-18.uf2 companion, SH1106 OLED
MeshCore-DV1-Cairn137-2026-11-18.uf2 companion, 2.42" SSD1309 OLED on the Grove port
MeshCore-WioL1Eink-Cairn137-2026-11-18.uf2 companion, 2.13" e-ink
MeshCore-WioL1RoomServer-Cairn137-2026-11-18.uf2 room server
Heltec Mesh Node T096 MeshCore-HeltecT096-Cairn137-2026-11-18-ble.uf2 companion (phone app over Bluetooth)
MeshCore-HeltecT096-Cairn137-2026-11-18-usb.uf2 companion (app over USB serial)
Heltec Mesh Node T114 (✅ beta) MeshCore-HeltecT114-Cairn137-2026-11-18-ble.uf2 companion (phone app over Bluetooth), in color

The compact repeater files (-repeater in the name) are rebuilt from the same tree: Heltec T096 and T114 (.uf2), and the Heltec Wireless Tracker, Tracker V2, V2, V3, V4 and V4-R8 (-repeater-full.bin and -repeater-update.bin). Cairn 137 runs on MeshCore 1.18.0, as 118 to 136 did. SHA256SUMS.txt covers every file: shasum -a 256 -c SHA256SUMS.txt.

Not in this release: the experimental boards (what experimental builds are). The Heltec WiFi LoRa 32 V4 (OLED) companion and the V4 in the non-touch Expansion Kit move to experimental-heltec-v4-137, rebuilt with no change but the build number. The GAT562 30S Mesh Kit companion and the Heltec T114 companion pre-release stay on Cairn 131; the Heltec Vision Master T190 and WiFi LoRa 32 V3 companions stay on Cairn 130, and the LilyGO T5 E-Paper S3 Pro and the SenseCAP MeshPager X2 stay on Cairn 127.

Don't miss a new CAIRN release

NewReleases is sending notifications on new releases.