github cvhviz/CAIRN cairn-v107
Cairn 107

one month ago

Updated 2026-10-07: ThinkNode M9 added. The T-Display SF32 files moved to Cairn 108.

Cairn 107 is mostly polish for the touch builds. It is MeshCore v1.17.1 underneath and works with the official MeshCore apps.

Highlights:

  • Spectrum views hold a steady scale, with richer colours (L2, Heltec V4).
  • A thin line flashes when the radio sends or receives (L2, Heltec V4, T096).
  • Coloured sidebar tabs, and a cleaner Nodes page with pull down to scan (L2, Heltec V4).
  • The Battery page shows its cards above the graph, and the splash shows the battery voltage (L2, Heltec V4).
  • Heltec V4: deeper greys that no longer turn green when dimmed.
  • LilyGO T-Display SF32: now in Cairn 108.
  • New: Elecrow ThinkNode M9, the full Cairn interface driven by its keyboard (tested on hardware, beta).
  • About 30 more boards are in a separate, untested preview release.

Updating keeps your identity, contacts, channels and settings. An L2 or Heltec V4 already on 106 can update over Wi-Fi: Settings > System > Firmware update > Check for updates.


Downloads

Board File Use
✅ Wio Tracker L1 Pro MeshCore-WioL1Pro-Cairn107-2026-10-05.uf2 companion, SH1106 OLED (main L1 build)
MeshCore-DV1-Cairn107-2026-10-05.uf2 companion, 2.42" SSD1309 OLED on the Grove port
MeshCore-WioL1Eink-Cairn107-2026-10-05.uf2 companion, 2.13" e-ink
MeshCore-WioL1RoomServer-Cairn107-2026-10-05.uf2 room server
✅ Wio Tracker L2 Pro MeshCore-WioL2Pro-Cairn107-2026-10-05-full.bin first install or recovery: 0x0 after a full erase
MeshCore-WioL2Pro-Cairn107-2026-10-05-update.bin update: 0x10000, a browser upload, or the online updater
✅ Heltec V4 touch (V4-R8 + Expansion Kit V2) MeshCore-HeltecV4Touch-Cairn107-2026-10-05-full.bin first install or recovery: 0x0 after a full erase
MeshCore-HeltecV4Touch-Cairn107-2026-10-05-update.bin update: 0x10000, a browser upload, or the online updater
✅ Elecrow ThinkNode M9 (beta) MeshCore-ThinkNodeM9-Cairn107-2026-10-05-full.bin first install or recovery: 0x0 after a full erase
MeshCore-ThinkNodeM9-Cairn107-2026-10-05-update.bin update: 0x10000 (Wi-Fi updates start with the next build)
✅ Heltec T096 MeshCore-HeltecT096-Cairn107-2026-10-05-ble.uf2 companion over Bluetooth
MeshCore-HeltecT096-Cairn107-2026-10-05-usb.uf2 companion over USB serial
✅ LilyGO T-Display SF32 + keypad in Cairn 108

✅ = tested on hardware. Beta: new to Cairn; some of its features haven't been tried on the board yet (see its section).

Bluetooth pairing uses the PIN shown on the device's screen. It is a new random PIN each boot, unless you set your own in Settings.

SHA256SUMS.txt covers every file: shasum -a 256 -c SHA256SUMS.txt. Install steps for each family: nRF52840 (UF2), ESP32 (esptool or web), T-Display SF32 (one-click installer). On ESP32 boards, flash either the -full.bin (first install or recovery, at 0x0 after a full erase, which erases the device) or the -update.bin (at 0x10000, a browser upload, or the online updater), never both.

The untested preview boards are in their own pre-release, cairn-v107-preview, not here.


Wio Tracker L2 Pro and Heltec V4 touch

Spectrum holds still. The Channel trace and the Band plot used to shift up and down as they scrolled, worst on the 10 s and 1 min spans. The scale now comes from the history on screen, not the radio's own noise-floor estimate, which resets to zero regularly. It changes only when the floor really moves (about 6 dB), and a frequency change still re-scales at once. Each column keeps its samples as the trace scrolls. If the radio briefly reports no floor, the last good reading is kept.

Spectrum colours.

  • The waterfall uses a heat ramp, dark where it's quiet and glowing where it's busy.
  • Bars, traces and peaks are coloured by strength above the floor: teal is normal (+6 dB), amber is strong (+20 dB), red is very strong (+35 dB).
  • Peak hold is an amber tick, and your own channel has a teal "CH" marker.
  • FLOOR stays white, with a coloured dot for the interference level.
  • The average line is a softer reference.
  • The Radio page's mini graph is as bright as before, with amber caps on strong signals.

TX/RX line. The status bar's bottom edge flashes orange when the radio sends and teal when it receives, for 150 ms. It never covers text or icons. It doesn't flash on the lock screen, the splash, or while the screen is off.

Sidebar. Each tab has its own colour: Home teal, Chats blue, Nodes violet, Radio amber, GPS green, Settings grey. The active tab is a filled pill with a white icon. The GPS icon no longer shows the satellite count; the GPS page and the status bar still do.

Home.

  • The small clock in the status bar is hidden on Home, since the big clock is right below it. Tapping there still opens the quick panel.
  • The node name is green.
  • On boards without a room-temperature sensor, the temperature is labelled "Chip". It is the processor's own temperature, which runs 30 to 40 °F above the room.

Nodes.

  • Pull down at the top of the list to scan for repeaters. Release when it says "Release to scan".
  • The small Scan and trash buttons are gone. "Clear recents…" is now the last item in the [All] filter menu (Recent view), still with a confirmation.
  • Counts are in the title: "Nodes · 9", "Nodes · 4 of 9" when filtered, and a warning when the contact table is nearly full or full. When it is, tap the title to see what that means.
  • Cards view starts right under the toolbar, without the empty band.

Battery page. The cards sit above the graph.

Splash. The battery row shows the voltage, for example "4.12 V". The labels underneath no longer have odd gaps. "Loading…" is centred on the screen.

Heltec V4 touch only. The deeper greys meant for its panel are now switched on, and the sidebar is true black. The dark surfaces no longer look washed out or turn green when dimmed. The Wio L2 Pro keeps its colours.

Elecrow ThinkNode M9 (beta, new)

The ThinkNode M9 has a 2.4" screen without touch, a QWERTY keyboard with a d-pad and a row of function keys, an LR1110 radio, GPS and a microSD slot. Cairn runs the same interface as the Wio Tracker L2 Pro on it, driven by the keys: a ring shows what is selected, the d-pad moves it and OK taps it. Typing goes straight into chats. Board page: ThinkNode M9.

Install. Use the ESP32 guide: a full erase, then the -full.bin at 0x0. This erases the device, so export your key and contacts in the MeshCore app first if it already runs MeshCore. Download mode is automatic through the M9's USB-serial chip; it has no Boot button.

Keys. OK taps, and OK twice unlocks. BACK goes back, HOME goes Home, MSG opens Chats, @ starts a new message, ADV sends an advert (hold it: GPS on or off), MAP opens the map, CTRL opens the quick panel, and MIC turns the screen off. Up past the top of Nodes scans for repeaters. Any key wakes a dark screen without acting. The keyboard sends one press per key, so holding an arrow moves once; quick repeated presses go further instead.

Also on the M9.

  • Spectrum with the Band scan on the LR1110.
  • A redesigned Battery page: time left or time to full, today's low and high, and a graph over 1 hour to 7 days.
  • Keyboard light: Auto (it lights while you type) or Off, in Settings > Display.
  • Battery saver (off by default, in Settings > Display): Bluetooth off and light sleep while the screen is dark.
  • Automatic power-off below 3.3 V on battery.
  • The microSD card mounts (a 16 GB card was tested).

Known issues.

  • Battery saver hasn't run on the device yet, so its savings are estimates. Turning Bluetooth back on after it restarts the device.
  • The offline map from microSD hasn't been tried on the M9 yet.
  • Wi-Fi updates start with the next build, since 107 is the M9's first.
  • Whether the status bar switches to battery when you unplug USB hasn't been confirmed yet.
  • If the keyboard controller reports its light brightness as 0 (ours did), Cairn leaves the light to the controller and the Keyboard light setting has no effect.
  • A key may not wake the board from Hibernate. The power slider (off, then on) or the RESET button always does.
  • The battery percentage uses a provisional curve for its 4.35 V cell. The reading pauses while Wi-Fi is on.

Heltec T096

TX/RX line. A 1 px line under the title bar flashes amber when the radio sends and teal when it receives, for 150 ms, on the Home pages and the message preview. With the Night theme both flashes are amber shades. It sits on an empty row, so nothing is covered, and it never wakes the screen. Busy traffic no longer speeds up the Spectrum or Sensors pages.

Wio Tracker L1 Pro

There are no changes on the L1 Pro images apart from the build number (OLED, DV1, e-ink and room server). Update if you want to keep all your devices on the same build.

LilyGO T-Display SF32

The SF32 files are in Cairn 108, with its notes. Boards on Cairn 107 update to it over Wi-Fi (Settings > System > Firmware update).

Coming soon

  • LilyGO T-Deck. A T-Deck Plus port is in progress.
  • Map downloads straight to the device over Wi-Fi.

Testing so far

On hardware:

  • L2: the steady spectrum is confirmed.
  • Heltec V4 touch: it passed the full on-device test suite with the coloured sidebar, the spectrum fix, the Battery page and the splash. Its new greys were checked by eye.
  • ThinkNode M9: it passed its full on-device test suite (13 of 13): boot, Home, Settings, the quick panel, lock, Radio, Spectrum and Band scan, the GPS map, every page reached by keys, and quick key runs. The microSD card mounts.
  • T096: the TX/RX line build was flashed and accepted by the bootloader. It has not been confirmed on screen yet.

The L1 Pro images were built but have no changes to test.

Don't miss a new CAIRN release

NewReleases is sending notifications on new releases.