This release brings the first half of a rework of the admin console for managed instances: a page for each person, bulk changes, groups, more administrators and a tamper-evident log of every administrative change. An administrator can let a passkey count as the second step, and people can choose whether a passkey also asks for their authenticator app code. Mail can be grouped by subject, cards get action buttons, a folder can keep its own table columns, and JMAP is now a regular account type.
Admin console (work in progress)
The admin console is being rebuilt for instances with many people, and this is about half of it. We're releasing it now so the work doesn't drift too far from the rest of Gofer. Policies for groups and people, roles for sharing out administration, and more are still to come, so expect pages to change and some parts to feel unfinished.
The console now opens on an Overview with how many people are active, pending and disabled, what needs an administrator (password-reset requests, two-factor still to set up, expired invitations, deletions in progress, refused attempts), and the latest administrative changes.
Users
- The Users list can be searched, filtered by status, by what needs an administrator and by group, and sorted by username, newest, last sign-in or status. It shows 50 people a page, with a Last sign-in column, and the address follows the list, so it can be reloaded or shared.
- Select people to change them at once: disable, enable, require or clear two-factor sign-in, require a password change, sign out everywhere, or add them to or remove them from a group. Up to 200 people a change. A dialog first lists whom the change will affect and whom it leaves out and why, then reports what happened to each person.
- Sign out everywhere is new, for one person or many. It ends every session and changes nothing else.
- The list can be downloaded as CSV, with the search and filters applied.
A page for each person
Usernames open a page with tabs for the person's Overview, Sign-in methods (password, passkeys, authenticator app, recovery codes left, two-factor requirement, linked sign-in accounts), Sessions (where they're signed in, with a way to sign out one session), Mailboxes (each mail account's address, server, sync state and last error, proxy, and whether the allowed servers would refuse it; never credentials or mail) and Activity.
Administrators
- Administrators can be invited from the console, or with
gofer auth invite create --administrator. They accept on/admin/enrolland set up an authenticator app and recovery codes at their first sign-in. - People › Administrators lists administrators, pending ones included, with how each one signs in, their last sign-in and how many places they're signed in.
- An administrator can send another administrator a sign-in reset. Using the link sets a new password and removes the old authenticator app, recovery codes and passkeys, so the next sign-in sets up a new app.
Groups
People › Groups creates groups of people, for administration only, not for mail delivery. They're the ground for the policies that come next, and don't change anything on their own yet. Each group has a Members tab and a Settings tab to rename, describe or delete it. The Users list shows each person's groups and filters by them.
Activity log
- Every administrative change is recorded in the same step as the change itself, so neither happens without the other. Each record names who made the change, to whom, what changed and from which browser. Records are chained, so changing, inserting or removing one shows up as a break.
- Activity › Administration lists the changes as sentences in the page's language, with filters by kind of change, and can download them as CSV or JSON Lines. Its settings choose how long changes are kept, 90 to 3,650 days (730 by default).
- Attempts the console refused, such as a change from a session that couldn't verify again, are recorded too and counted on the Overview.
gofer admin audit verifychecks the chain from the command line, andgofer admin audit exportwrites the log as CSV or JSON Lines, whether or not Gofer is running.
Everyday use
- A change that needs a recent verification asks for it when it's sent, then goes through without anything being typed again. The pages no longer lock up front.
- Results show as toasts instead of in the address.
- Each person's dialogs load when they're picked, so the Users page stays quick with many people.
- Deleting a proxy, removing an allowed server and the other destructive changes ask first again. The console's own page frame had stopped asking.
- Security › Sign-in can require two-factor sign-in of everyone. It first previews who has no authenticator app yet and which sessions will end. People without the app set one up at their next sign-in instead of the change being refused.
Open and personal mode
Instances without the console (open and personal mode) get Settings › Diagnostics with the avatar, contacts and labels checks and a link to Mail operations. Open mode's /admin pages are gone, and their addresses lead to the same place in Settings.
Passkeys and two-factor sign-in
- People with a passkey and an authenticator app can choose whether a passkey sign-in also asks for the app code. It's on by default, so nothing changes until someone turns it off, and changing it asks first and says which devices will be signed out. Thanks to @M3gaFr3ak (#113, for #25).
- A two-factor requirement for a person can now be "A passkey is enough" (the default for new requirements) or "Always ask for the authenticator app code". With the first, a passkey with its PIN or biometrics signs the person in on its own; a password or provider sign-in still needs the app code. Administrators and the requirement for everyone always need the app code.
- The authenticator app can be removed while a passkey remains.
- "2FA" now reads "authenticator app (TOTP)" where the app is meant, and passkey sessions are labelled "Passkey with PIN or biometrics".
Mail list
- Group by subject: mail without reply headers can join a conversation with the same subject, as Gmail does. A reply (Re:, Fwd:) joins when it shares someone with the conversation, other mail when it comes from the same sender, such as repeated notices. It's off by default and set in Settings with a time window (7 days) and a conversation size limit (100). "Regroup existing mail" applies the setting to mail already saved, or splits conversations again after turning it off, with its progress in a toast. (#112)
- Card action buttons: Read/unread, Archive, Delete, Edit labels and Spam can be added to the mail card layout. They act on the whole selection when their card is selected, and on that card alone otherwise. Their labels follow the folder (Move to Inbox, Delete permanently, Not spam), and Delete in Trash asks first. They show while the pointer is over the card. A new setting, "Show action buttons only on hover" under Compose and display › List view, keeps them showing when turned off. Phones keep swiping. Thanks to @roberto-guapo (#124).
- Columns per folder: the table's column menu has "Only for this folder", so Sent can show To while the inbox shows From. The choice follows the person to their other devices. (#117)
- With the Unread filter on, a message you open is marked read but stays in the list until the filters change or the page reloads. Mark as read on a selection still takes rows out. Thanks to @roberto-guapo for finding this (#127).
Compose and keyboard
- The compose toolbar is one Tab stop. The arrow keys, Home and End move between its buttons, so Tab goes from Subject to the body in one press. Thanks to @roberto-guapo for the focus fixes (#125): a new message opens in To, in the dialog and the pane, and showing Cc or Bcc puts the cursor in it.
- The default signature no longer pulls the cursor out of To when it loads. Changing From no longer moves the cursor into the body either.
- Menus show the theme's focus ring instead of the browser's black outline.
JMAP
JMAP accounts are a regular account type. They can always be added, the "Experimental" badge and the paused-account warnings are gone, and GOFER_JMAP_EXPERIMENT is no longer read.
Fixes and polish
- Some messages showed a blank body and lost their inline PDFs. HTML parts inside mixed parts are now kept in order, and inline files without a Content-ID become regular attachments. Thanks to @petertroeger (#136, #132).
- Full emails without a doctype could make the reading pane grow to an enormous height. They now render without quirks mode, in a way that keeps image slices in older newsletters together. Thanks to @petertroeger (#137).
- A Gmail import that stopped part way was never resumed, so older mail stayed missing without an error. Each sync now continues it until every folder has been gone through once, and a repair continues where the last one stopped. (#133)
- Some IMAP servers answered BAD to the header names Gofer asked for, so folders failed to sync, or returned empty headers, which lost threading. The names are now sent without quotes. (#119)
- Some mail servers started adding $HasNoAttachment or $HasAttachment to new mail, and Gofer showed them as labels. These and other status keywords are no longer labels, and labels already made from them are removed at startup. They stay on the server. (#121)
- SMTP sends with AUTH LOGIN over TLS when a server offers LOGIN but not PLAIN. Thanks to @mese1000 (#115).
- Opening the event editor could freeze, depending on the time zone data. Thanks to @mese1000 (#116).
- Windows: Gofer refused to start after the first run ("invalid uri authority"). Thanks to @roberto-guapo (#126). New users also left a second copy of their database's name in the users folder, which blocked moving an old shared database to per-user files. Startup removes the leftovers.
- Sync settings show special folders in the page's language, as the sidebar does, and hovering a folder shows its server path. An IMAP folder that read "INBOX" now reads "Inbox". Thanks to @h88782481 (#118).
- Long account errors and folder names no longer push the sync progress dialog past the window. The full error shows on hover. (#120)
- Long account wizard steps, such as many address books, and the identities dialog with many addresses now scroll, and Tab no longer shows the wrong wizard step. Thanks to @franslabs (#129).
- The phone step bar keeps Mail's sub-steps across its whole width.
- The sidebar scrollbar is visible in light themes with a darker sidebar. (#114)
- The search scope menu uses the same checkboxes as the rest of Gofer.
Documentation
- New guides for the Raspberry Pi and for any Linux computer: running Gofer as a systemd service, plain HTTP on a private network, HTTPS with Tailscale, Gmail and Google Workspace, and updating a binary install with a backup and a rollback. Thanks to @roberto-guapo (#128).
- CONTRIBUTING.md lists the rules Gofer's code follows, for people and their AI agents.
Upgrade notes
- ⚠️ This release upgrades the database (schemas 147 to 150). You can't go back to an older release afterwards, so back up your data directory first.
- Replies without reply headers used to join a conversation with the same subject from the last 30 days. They now only do when Group by subject is turned on, and use its window. Turn it on and use "Regroup existing mail" to keep the old grouping.
- Existing two-factor requirements keep asking for the authenticator app code. To let a passkey count, change the person's requirement to "A passkey is enough".
- Requiring two-factor sign-in of everyone ends every session that didn't use the authenticator app, including passkey sign-ins.
GOFER_JMAP_EXPERIMENTdoes nothing now and can be removed. If it was set tofalse, existing JMAP accounts start syncing and sending after the upgrade.- Open mode's
/adminaddresses lead to Settings. In managed mode, the diagnostics pages moved to/admin/system/diagnostics/…and the administrator's own page to/admin/account. The old addresses lead to the new ones. - Gmail accounts with an unfinished import fill in on their own, so their first sync after the upgrade may take a while.
- Emails without a doctype may look slightly different, since they no longer render in quirks mode.
- Messages downloaded before the upgrade keep the body they were saved with. The fix for blank bodies applies to mail downloaded from now on.