Changes since CMSSW_8_1_0_pre16:
CMSSW_8_1_0_pre16...CMSSW_8_1_0
- #16831 from @cms-AlCaDB: [81X] update RECO & SIM phase-1 geometry
alca - #16805 from @cms-sw: Revert "interface compatible with evtgen 1.6"
comparisongenerators - #16789 from @shervin86: bug fix in clone constructor of GsfElectron. New method to get regres
reconstruction - #16781 from @kpedro88: Remove obsolete customize from D6 workflows [81X]
pdmv - #16774 from @hengne: complete the list of wfs in upgrade framework
pdmv - #16773 from @kencall: Hcal validation new histograms
dqm - #16771 from @rovere: Revert TOB6 and full TEC material to pre8
geometry - #16762 from @VinInn: protect DAClusterizerInZ_vect.cc from a too small value backport #16761
reconstruction - #16757 from @ianna: Bugfix: 2019 Geometry Scenario
geometryvisualization - #16744 from @bsunanda: bsunanda:Phase2-ft12 Clean up FastTimeTopology code
geometry - #16741 from @ferencek: Extended maximum allowed span for Phase2 Inner Tracker pixel clusters (81X)
reconstruction - #16740 from @makortel: Switch phase1 tracking to generic pixel CPE (81X)
reconstruction - #16735 from @Dr15Jones: Fixed precedence order problem with FormulaEvaluator
analysisreconstruction - #16731 from @deguio: fix calib map and typo
dqm - #16726 from @FHead: HIN High-pT trigger DQM for 81X (CMSHLT-1129, CMSHLT-1135, CMSHLT-1137)
dqm - #16722 from @idebruyn: Split cluster charge & S/N MEs for thin and thick sensors (81X)
dqm - #16720 from @diguida: [CMSSW_8_1_X] Add a new python configuration for EcalADCToGeV B transition O2O, and new modules and configuration for EcalIntercalibConstants and EcalPedestals B transition O2O
db - #16700 from @diguida: Add HLT_PAZeroBias and HLT_PAL1AlwaysTrue trigger bits to the input event selection for PixelLumi online DQM client forVdM scan.
dqm - #16697 from @kpedro88: Fix Phase2 memory corruption (81X)
analysisreconstruction - #16694 from @cms-sw: Revert "bsunanda:Phase2-hgx67 Correct reconstruction geometry for EE and FH with full coverage"
comparisondqmgeometryreconstruction - #16685 from @cms-AlCaDB: [81X] Re-add eventSetupPathKey to ALCARECOLumiPixels
alca - #16672 from @cms-AlCaDB: [81X] update phase-I Simulation geometry
alca - #16670 from @calabria: Reduced muon validation for PhaseII Upgrade high PU scenarios (81X)
dqmhltreconstructionsimulation - #16666 from @kpedro88: Improvements for upgrade matrix (81X)
generatorspdmv - #16661 from @makortel: Fix MultiTrackValidator MVA monitoring (81X)
dqmreconstruction - #16657 from @cms-AlCaDB: [81X] update dataRun2 GT with conditions for Sept2016 re-reco
alca - #16590 from @bsunanda: bsunanda:Phase2-ft11 Update README file in Configuration/Geometry and add required files for FastTime Reco Geometry
geometry - #16589 from @mtosi: fix some DQM sequences for phase1 scenario
dqmreconstructionsimulation - #16585 from @civanch: Added PhysList for study of HGCAL TB
simulation - #16583 from @mzarucki: Updated L1TStage2uGT DQM histogram titles
dqm - #16582 from @cms-sw: fix RecoMET/METProducers/test/runtests.sh to stop the test if cmsDriver command fails
reconstruction - #16580 from @sushilchauhan: added dark photon model to SimG4Core custom physics
simulation - #16579 from @kpedro88: increase number of high pT jets for flat QCD
generators - #16578 from @kpedro88: remove a bunch of unneeded Pythia6 configs
coredqmgeneratorshlt - #16576 from @mtosi: re-enable HLT DQM, Validation and Harvesting sequences
dqm - #16574 from @kfjack: Move HighMET skim from JetHT PD to MET PD in skim matrix and relval
pdmv - #16573 from @OlivierBondu: Moving RecoLocalTracker from Legacy to Thread-Friendly
reconstruction - #16571 from @ianna: Replace Subtraction Solid with Union Solid
geometry - #16570 from @makortel: Fix some exceptions of cms.Modifier
core - #16569 from @mariadalfonso: HBHE M2-parameters: chi2, energy, pedSigma in M2
hltreconstruction - #16567 from @bsunanda: bsunanda:Phase2-ft10 Modify the FastTimeDetId according to Lindsey's suggestion
simulation - #16565 from @Dr15Jones: Added # streams and threads to Timing JobReport
core - #16563 from @JanFSchulte: add customization function to switch the pixelTracks for the iterativ
hlt - #16562 from @bsunanda: bsunanda:Phase2-ft09 Add Reco geometry for Fast Timing
geometry - #16561 from @slava77: add bunchSpacingProducer in localreco* (fw port of #16560)
operations - #16559 from @makortel: Monitor track selection MVAs in MultiTrackValidator
dqm - #16558 from @cms-sw: Revert "Do not sort the das results if CMSSDT_DAS_CLIENT_NO_SORT env is set"
comparisonpdmv - #16555 from @bsunanda: bsunanda:Phase2-hgx68 Update validation code
dqm - #16554 from @kencall: Hcal digi validation
dqm - #16551 from @afiqaize: make code pick up HI and PA EGM paths as well 81X
dqm - #16548 from @ggovi: fixes for the conddb copy functions
db - #16547 from @ghugo83: Merged pixelRecoMaterial.xml and trackerRecoMaterial.xml into one file
geometrysimulation - #16544 from @cms-AlCaDB: [81X] Update HCal TP parameters and fixes in 2017 wf
alca - #16543 from @Dr15Jones: Close the socket after it is used in StatisticsSenderService
core - #16540 from @jlagram: Strip hit eff lumi
alca - #16539 from @smuzaffar: fix compilation error for gcc600: sdt::accumulate need numeric header
alca - #16535 from @kpedro88: Update 14 TeV relval workflows to Pythia8
generatorspdmv - #16534 from @cms-tsg-storm: Update of HLT menu (81X)
alcahlt - #16531 from @bsunanda: bsunanda:Phase2-gem20 Update the current proposal for GE21 as a Dev version
geometry - #16529 from @idebruyn: Added SiStrip Report maps for each error flag separately
dqm - #16528 from @fioriNTU: Adding files and modifications to count Zero Occupancy ROCs offline
dqm - #16526 from @kpedro88: Update SiPM parameters and fix a few bugs in hardcode conditions
alcasimulation - #16524 from @bsunanda: bsunanda:Phase2-hgx67 Correct reconstruction geometry for EE and FH with full coverage
dqmgeometryreconstruction - #16523 from @bsunanda: bsunanda:Run2-TB18 Correct the geometry for the second CERN 8 module TB Run
geometry - #16519 from @schneiml: Pixel Geometry Fixes
geometry - #16515 from @deguio: update to support sual fed readout
comparisondqm - #16512 from @thomreis: Fix ProductNotFound error for RPC inputs to EMTF emulator in DQM workflow
dqm - #16508 from @hengne: update matrixInjector to adapt to wm parameter changes
pdmv - #16505 from @mandrenguyen: Switched to pp event content (81X)
pdmv - #16501 from @lgray: Factorize fast timing layer geometry dependent things from RECO algorithms.
geometryoperationspdmvsimulation - #16499 from @kpedro88: Hcal dump calibrations
alcadbreconstruction - #16498 from @pmandrik: Pythia8 shower weights and labels saving
generators - #16495 from @VinInn: Add profiles for chi2
dqm - #16492 from @makortel: Remove inheritance in L1MuonPixelTrackFitter and L1MuonRegionProducer
reconstruction - #16491 from @felicepantaleo: Pixel Phase I - CA - improving fake rejection at high pt
reconstruction - #16488 from @felicepantaleo: DQM timing propagation
dqm - #16486 from @davidlange6: trivial unit test for both histogrammar and matplotlib
analysis - #16483 from @archiron: Renorm provenance histos 81 x v1
dqm - #16480 from @mohsinwaseem: Repeated Bins in single muon trigger histos fixed
dqm - #16479 from @mandrenguyen: Fix to pA skim names (81X)
pdmv - #16476 from @deguio: Zdc task 81x
dqm - #16474 from @calabria: Fix to the Muon validation parameters
dqm - #16472 from @mazarkin:
qFix for reading and dumping HcalTPParametersalca` - #16470 from @ebrondol: Fix phase2 pixel in GeometrySearch
reconstruction - #16468 from @emiglior: Pixel clusterizer configurable gain cmssw 81 x
reconstruction - #16466 from @mandrenguyen: Updated names of pA skims
pdmv - #16465 from @smuzaffar: Do not sort the das results if CMSSDT_DAS_CLIENT_NO_SORT env is set
pdmv - #16464 from @matz-e: HCAL 2017 HF TP dual-anode readout fixes.
comparisonl1 - #16461 from @kpedro88: remove HcalUpgradeDataFrame and related classes/algos
alcadqmreconstructionsimulation - #16460 from @makortel: Fix 2017 design workflow for '-i all'
pdmv - #16453 from @capalmer85: PU distributions for train BXs in high PU fill 5412
operationssimulation - #16449 from @mmusich: [81X] Primary Vertex Validation: enable choice of y-axis range from all-in-one tool
alca - #16446 from @smdogra: pACentrality DQM in 81X
dqm - #16445 from @ghugo83: Fixed supports composites in Flat and Tilted OT in 81X (negligeable effect on MB though)
geometry - #16443 from @alberto-sanchez: adding muon with trigger within the Onia2MuMu package -81x
analysis - #16436 from @bsunanda: bsunanda:Run2-alca71 Correct the o/p for AlCaReco stream
alca - #16435 from @cms-met: JER MET uncertainties and METSignifiance re-estimation
analysisreconstruction - #16431 from @FHead: HIN High-pT trigger DQM for 81X (CMSHLT-1110)
dqm - #16428 from @varuns23: PR for HLT online DQM monitoring code for Proton-Lead run in 81X (upd
dqmhlt - #16425 from @echapon: Allow a boost on particles in MCParticlePairFilter
generators - #16418 from @swayand: Fixing code of tau embedding (TauAnalysis/MCEmbeddingTools) for run2 needs part2
simulation - #16415 from @illuzate: HLTrigger for UPC Analysis for 81X Fix Final
dqm - #16407 from @boudoul: Extending the Phase2 2023D4 Workflow to Reco (up to Harvesting) steps
pdmvreconstruction - #16393 from @ferencek: Reclustering of SiPixelClusters
reconstruction - #16392 from @lowette: Introduction of Lorentz Angle correction in Phase 2 CPE
reconstruction - #16389 from @suchandradutta: updated Digitizer framework adding (a) option to allow independent El
simulation - #16379 from @mommsen: Additional FED IDs for new pixel detector
daq - #16366 from @wulsin: Ensure GEANT simulation of exotic long-lived particles that decay outside beampipe
generatorssimulation - #16354 from @dildick: ME0 re-digitizer module
coresimulation - #16351 from @mtosi: add customization function for highPU @HLT
hlt - #16343 from @cms-AlCaDB: [81X] Add Phase-I Cosmics
alcadqmpdmvreconstructionsimulation - #16288 from @goni: [HIN Dilepton] pPb Run DQMOffline for 81X
dqmreconstruction - #16286 from @kencall: Update to Hcal Validation
dqm - #16273 from @dildick: ME0 pseudo digitizer: Fix the BX mixing window + enable bkg scaling with lumi
simulation - #16184 from @pieterdavid: CalibTracker/SiStripESProducers edm::Service to ESProducer migration
alcaanalysisdqm - #16131 from @cms-met: 81x MET XY correction cond DB
analysisdbreconstruction - #16010 from @CTPPS: CTPPS: detector id update
alcadbdqmgeometryreconstructionsimulation - #15876 from @alberto-sanchez: single particle filter, add needed features
generators - #15821 from @gouskos: add pixel roc occupancy dqm plots
dqm - #15461 from @alberto-sanchez: interface compatible with evtgen 1.6
generators - #15049 from @forthommel: Set the input tag for the PileupSummaryInfo collection retrieval
analysis - #14924 from @depasse: PreShower tools for DBv2
db
CMSDIST Changes between Tags REL/CMSSW_8_1_0_pre16/slc6_amd64_gcc530 and REL/CMSSW_8_1_0/slc6_amd64_gcc530:
cms-sw/cmsdist@REL/CMSSW_8_1_0_pre16/slc6_amd64_gcc530...REL/CMSSW_8_1_0/slc6_amd64_gcc530
- cms-sw/cmsdist#2695 from @iahmad-khan: updates RecoEgamma-ElectronIdentification to use new tag
- cms-sw/cmsdist#2671 from @smuzaffar: apply readline6.3 fedoraproject patches
- cms-sw/cmsdist#2669 from @smuzaffar: cleanup cms internal variables cms_cxx and cms_cxxflags
- cms-sw/cmsdist#2654 from @iahmad-khan: updates openloops to 1.3.1
- cms-sw/cmsdist#2647 from @cms-sw: update frontier client to remove the unused patch
- cms-sw/cmsdist#2646 from @cms-sw: update icc to version 2017.0.098
- cms-sw/cmsdist#2644 from @smuzaffar: updated frontier client to 2.8.20
- cms-sw/cmsdist#2556 from @xjanssen: Rivet 2.5.2 and Yoda 1.6.5