cms-sw/cmssw CMSSW_11_1_0_pre7

on GitHub

Changes since CMSSW_11_1_0_pre6:

CMSSW_11_1_0_pre6...CMSSW_11_1_0_pre7

• #29748 from @cms-sw: Revert "PUPPI MET in RECO" analysis dqm reconstruction

• #29745 from @schneiml: DQM: Use correct local MEs in DQMEDAnalyzer dqm

• #29741 from @cvuosalo: Fix crashing bug in reco when run with XML geometry dqm

• #29738 from @schneiml: DQM: Fix empty lumis with per-lumi plots in DQMOneEDAnalyzer dqm

• #29737 from @fwyzard: Clean up BuildFiles under Validation/ core dqm generators geometry l1

• #29736 from @fwyzard: Clean up BuildFiles under Utilities/ analysis core simulation

• #29735 from @fwyzard: Clean up BuildFiles under TrackPropagation/ reconstruction simulation

• #29734 from @fwyzard: Clean up BuildFiles under TrackingTools/ reconstruction

• #29733 from @fwyzard: Clean up BuildFiles under TopQuarkAnalysis/ analysis

• #29732 from @fwyzard: Clean up BuildFiles under TBDataFormats/ analysis

• #29731 from @fwyzard: Clean up BuildFiles under TauAnalysis/ analysis simulation

• #29730 from @fwyzard: Clean up BuildFiles under SUSYBSMAnalysis/ analysis

• #29729 from @fwyzard: Clean up BuildFiles under SLHCUpgradeSimulations/ geometry upgrade

• #29728 from @fwyzard: Clean up BuildFiles under SimTransport/ simulation

• #29727 from @fwyzard: Clean up BuildFiles under SimTracker/ l1 simulation upgrade

• #29726 from @fwyzard: Clean up BuildFiles under SimRomanPot/ simulation

• #29725 from @fwyzard: Clean up BuildFiles under SimPPS/ simulation

• #29724 from @fwyzard: Clean up BuildFiles under SimMuon/ simulation upgrade

• #29723 from @fwyzard: Clean up BuildFiles under SimGeneral/ comparison simulation

• #29722 from @fwyzard: Clean up BuildFiles under SimG4Core/ simulation

• #29721 from @fwyzard: Clean up BuildFiles under SimG4CMS/ simulation upgrade

• #29720 from @fwyzard: Clean up BuildFiles under SimFastTiming/ simulation upgrade

• #29719 from @fwyzard: Clean up BuildFiles under SimDataFormats/ generators simulation upgrade

• #29718 from @fwyzard: Clean up BuildFiles under SimCalorimetry/ l1 simulation upgrade

• #29717 from @fwyzard: Clean up BuildFiles under RecoVertex/ alca reconstruction

• #29716 from @fwyzard: Clean up BuildFiles under RecoTracker/ reconstruction

• #29715 from @fwyzard: Clean up BuildFiles under RecoTBCalo/ reconstruction

• #29714 from @fwyzard: Clean up BuildFiles under RecoTauTag/ hlt reconstruction

• #29713 from @fwyzard: Clean up BuildFiles under RecoRomanPot/ reconstruction

• #29712 from @fwyzard: Clean up BuildFiles under RecoPPS/ reconstruction

• #29711 from @fwyzard: Clean up BuildFiles under RecoPixelVertexing/ reconstruction

• #29710 from @fwyzard: Clean up BuildFiles under RecoParticleFlow/ reconstruction

• #29709 from @fwyzard: Clean up BuildFiles under RecoMuon/ hlt reconstruction

• #29708 from @fwyzard: Clean up BuildFiles under RecoMTD/ reconstruction upgrade

• #29707 from @fwyzard: Clean up BuildFiles under RecoMET/ analysis reconstruction

• #29706 from @fwyzard: Clean up BuildFiles under RecoLuminosity/ reconstruction

• #29705 from @fwyzard: Clean up BuildFiles under RecoLocalTracker/ reconstruction upgrade

• #29704 from @fwyzard: Clean up BuildFiles under RecoLocalMuon/ reconstruction upgrade

• #29703 from @fwyzard: Clean up BuildFiles under RecoLocalFastTime/ reconstruction upgrade

• #29702 from @fwyzard: Clean up BuildFiles under RecoLocalCalo/ reconstruction upgrade

• #29701 from @fwyzard: Clean up BuildFiles under RecoJets/ reconstruction

• #29700 from @fwyzard: Clean up BuildFiles under RecoHI/ reconstruction

• #29699 from @fwyzard: Clean up BuildFiles under RecoHGCal/ reconstruction upgrade

• #29698 from @fwyzard: Clean up BuildFiles under RecoEgamma/ hlt reconstruction

• #29697 from @fwyzard: Clean up BuildFiles under RecoEcal/ reconstruction

• #29696 from @fwyzard: Clean up BuildFiles under RecoCaloTools/ reconstruction

• #29695 from @fwyzard: Clean up BuildFiles under RecoBTau/ reconstruction

• #29694 from @fwyzard: Clean up BuildFiles under RecoBTag/ reconstruction

• #29693 from @fwyzard: Clean up BuildFiles under QCDAnalysis/ analysis

• #29691 from @fwyzard: Clean up BuildFiles under PerfTools/ core

• #29690 from @fwyzard: Clean up BuildFiles under OnlineDB/ db

• #29689 from @fwyzard: Clean up BuildFiles under MuonAnalysis/ analysis

• #29688 from @fwyzard: Clean up BuildFiles under Mixing/ simulation

• #29687 from @fwyzard: Clean up BuildFiles under MagneticField/ reconstruction

• #29686 from @fwyzard: Clean up BuildFiles under L1TriggerOffline/ l1

• #29685 from @fwyzard: Clean up BuildFiles under L1Trigger/ l1 upgrade

• #29684 from @fwyzard: Clean up BuildFiles under L1TriggerConfig/ l1

• #29683 from @fwyzard: Clean up BuildFiles under JetMETCorrections/ analysis reconstruction

• #29682 from @fwyzard: Clean up BuildFiles under IORawData/ alca

• #29681 from @fwyzard: Clean up BuildFiles under IOPool/ core

• #29680 from @fwyzard: Clean up BuildFiles under IOMC/ core generators simulation

• #29679 from @fwyzard: Clean up BuildFiles under IgTools/ core

• #29678 from @fwyzard: Clean up BuildFiles under HiggsAnalysis/ analysis

• #29677 from @fwyzard: Clean up BuildFiles under HeavyFlavorAnalysis/ analysis

• #29676 from @fwyzard: Clean up BuildFiles under GeometryReaders/ geometry

• #29675 from @fwyzard: Clean up BuildFiles under Geometry/ geometry upgrade

• #29674 from @fwyzard: Clean up BuildFiles under FWCore/ core

• #29673 from @fwyzard: Clean up BuildFiles under FastSimulation/ fastsim

• #29672 from @fwyzard: Clean up BuildFiles under FastSimDataFormats/ fastsim

• #29671 from @fwyzard: Clean up BuildFiles under EventFilter/ daq l1 reconstruction upgrade

• #29670 from @fwyzard: Clean up BuildFiles under ElectroWeakAnalysis/ analysis

• #29669 from @fwyzard: Clean up BuildFiles under EgammaAnalysis/ analysis comparison

• #29668 from @fwyzard: Clean up BuildFiles under DQMServices/ dqm

• #29667 from @fwyzard: Clean up BuildFiles under DQMOffline/ dqm l1

• #29666 from @fwyzard: Clean up BuildFiles under DQM/ dqm hlt

• #29665 from @fwyzard: Clean up BuildFiles under DPGAnalysis/ analysis dqm pdmv

• #29664 from @fwyzard: Clean up BuildFiles under DetectorDescription/ geometry

• #29663 from @fwyzard: Clean up BuildFiles under DataFormats/ alca analysis core daq dqm generators hlt l1 reconstruction simulation upgrade xpog

• #29661 from @fwyzard: Clean up BuildFiles under CUDADataFormats/ heterogeneous

• #29660 from @fwyzard: Clean up BuildFiles under CondTools/ db dqm hlt l1

• #29659 from @fwyzard: Clean up BuildFiles under CondFormats/ alca analysis db dqm hlt l1 reconstruction

• #29657 from @fwyzard: Clean up BuildFiles under CondCore/ alca db dqm hlt l1

• #29656 from @fwyzard: Clean up BuildFiles under GeneratorInterface/ generators

• #29655 from @fwyzard: Clean up BuildFiles under Fireworks/ visualization

• #29654 from @fwyzard: Clean up BuildFiles under CommonTools/ analysis dqm fastsim reconstruction

• #29653 from @fwyzard: Clean up BuildFiles under Configuration/ operations pdmv

• #29652 from @fwyzard: Clean up BuildFiles under CaloOnlineTools/ alca comparison db

• #29651 from @fwyzard: Clean up BuildFiles under CalibTracker/ alca

• #29650 from @fwyzard: Clean up BuildFiles under CalibMuon/ alca

• #29649 from @fwyzard: Clean up BuildFiles under CalibCalorimetry/ alca l1

• #29648 from @fwyzard: Clean up BuildFiles under Calibration/ alca

• #29645 from @fwyzard: Clean up BuildFiles under CalibFormats/ alca

• #29643 from @fwyzard: Clean up BuildFiles under AnalysisDataFormats/ analysis

• #29642 from @fwyzard: Clean up BuildFiles under AnalysisAlgos/ analysis

• #29641 from @fwyzard: Clean up BuildFiles under Alignment/ alca

• #29638 from @fwyzard: Clean up BuildFiles under HeterogeneousCore/ heterogeneous

• #29637 from @fwyzard: Clean up BuildFiles under HLTriggerOffline/ dqm

• #29636 from @fwyzard: Clean up BuildFiles under HLTrigger/ hlt

• #29629 from @christopheralanwest: Update offline GTs for Run 1 and Run 2 data, including special runs. alca

• #29628 from @chosila: Added particle flow candidates to particle flow validation dqm

• #29625 from @bsunanda: Run3-sim69 Add a few cfi files which defines transition energies for standard G4 versions simulation

• #29623 from @fabiocos: DetectorDescription FilteredView: remove debugging printouts geometry

• #29621 from @srimanob: Add warning if WF name will be too long for submission pdmv upgrade

• #29620 from @fwyzard: Add ECAL-only local reconstruction workflow dqm operations pdmv simulation upgrade

• #29616 from @slava77: initialize std::array data member in TICLCandidate reconstruction upgrade

• #29615 from @wddgit: Migrate legacy output modules to be 'one' types core

• #29613 from @smuzaffar: added missing dependency; header cleanup alca db

• #29612 from @bsunanda: Run3-sim68 Use CMSHadronPhysics_FTFP_BERT in all FTFP_BERT* physics lists simulation

• #29611 from @Dr15Jones: Extend ConfigBuilder to properly handle special import handling operations

• #29608 from @smuzaffar: BuildFile cleanup: removed unnecessary dependencies alca db l1 reconstruction simulation

• #29607 from @ghugo83: Add Phase 2 Outer Tracker with sensors updates + OTST MB update. Remove T18. geometry l1 operations pdmv upgrade

• #29606 from @davidlange6: add missing includes revealed by ROOT master in modules branch reconstruction

• #29602 from @bsunanda: Run3-hcx255 Add the dump code for preshower and change the names of some classes geometry

• #29599 from @fabiocos: MTD geometry: porting of MTDTopology to DD4hep geometry upgrade

• #29598 from @smuzaffar: [LLVM10] Fixing compilation warnings for SIM simulation

• #29597 from @fabiocos: ECAL Digitization: fix logical bug in protection against unwanted gainId values in trivial zero suppression simulation

• #29596 from @dntaylor: Add time support to IPCutPFCandidateSelector analysis reconstruction

• #29595 from @mrodozov: [LLVM10] Alignment fix clang warnings alca

• #29594 from @mrodozov: [LLVM10] Calibration fix clang warnings alca l1

• #29590 from @bsunanda: Run3-gem36 Adding an object MuonGeometryConstants to EventSetup which can give similar functionality as MuonDDDConstants geometry

• #29589 from @ghugo83: Add Run 3 beam pipe + Minor update of Phase 2 beam pipe geometry upgrade

• #29588 from @mrodozov: [LLVM10] GeneratorInterface fix warning generators

• #29587 from @mrodozov: [LLVM10] L1Trigger and L1TriggerConfig fix clang warnings l1

• #29586 from @makortel: Make DQMRootOutputModule to depend on all DQM modules via DQMTokens dqm

• #29585 from @makortel: Add globalBeginJob() interface for stream modules using GlobalCache core

• #29584 from @makortel: Protect ProcessCallGraph for module IDs larger than the number of modules hlt

• #29583 from @mrodozov: [LLVM10] OnlineDB fix clang warnings db

• #29582 from @bsunanda: Phase2-hgx239 Adding version 12 of HGCal Geometry geometry upgrade

• #29581 from @mrodozov: [LLVM10] PhysicsTools fix clang warnings analysis reconstruction xpog

• #29580 from @arossi83: Fix ranges for run3 dqm

• #29579 from @guitargeek: Clean buildfiles in DQM dqm l1

• #29578 from @Dr15Jones: Use reference in range based for loops core

• #29577 from @vargasa: DD4hep: SimTracker/TrackerMaterialAnalysis Migration MaterialAccounting simulation

• #29576 from @jeongeun: Update eventcontent structure in RecoHI packages reconstruction

• #29572 from @smuzaffar: [LLVM10] Fixing compilation warnings for Reco2 reconstruction simulation

• #29571 from @jeongeun: Update eventcontent structure in RecoTauTag RecoMTD reconstruction upgrade

• #29570 from @smuzaffar: [LLVM10] Fixing compilation warnings for DQM dqm

• #29566 from @bsunanda: Phase2-hgx238 Add some missing methods to a few geometry classes used for HGCal geometry upgrade

• #29565 from @mmusich: Fix phase2 tracker premixed digis simulation upgrade

• #29559 from @casarsa: MTD validation: fixed python test config file dqm

• #29556 from @namapane: Magnetic Field optimization reconstruction

• #29555 from @fabiocos: MTD geometry: update of ideal geometry tests geometry upgrade

• #29554 from @SanghyunKo: Update & optimize GEN-only Relval workflows generators pdmv upgrade

• #29552 from @bsunanda: Run3-TB57 Update the cfi/cfg files for HGCal TB studies geometry simulation upgrade

• #29547 from @ronchese: Bph reco update 200422 analysis

• #29546 from @Martin-Grunewald: Fix fillDescription of PFRecoTauDiscriminationByIsolation reconstruction

• #29545 from @rovere: Improve Validation for unphysical CaloParticles dqm

• #29544 from @lwang046: Hcal DQM remove OneLumiEDAnalyzer dqm

• #29543 from @ianna: [DD4hep] Global Node Transformation in a Path geometry simulation

• #29542 from @alja: Fireworks 11_1_X: Fix crash on use of non-default palette (forward port) visualization

• #29541 from @guitargeek: Clean buildfiles after L1TriggerOffline in alphabet alca analysis core db dqm reconstruction simulation

• #29535 from @jeongeun: Update eventcontent structure in RecoPixelVertexing reconstruction

• #29534 from @silviodonato: Fix DQM/Integration unit test in PY3 dqm

• #29530 from @bsunanda: Run3-sim66 Make ECAL geometry builder dd4hep ERA dependent geometry

• #29525 from @Dr15Jones: Fix skipping of LuminosityBlock with firstLuminosityBlockForEachRun core

• #29524 from @bsunanda: Phase2-hgx237 Validation of Cell paprameters for HGCal in DDD vs DD4Hep geometry upgrade

• #29523 from @Dominic-Stafford: Change Herwig7Interface to be consistent with Herwig 7.2.0 generators

• #29520 from @tschuh: L1Trigger/TrackerDTC Debugged and Analyzer added. l1 upgrade

• #29519 from @Dr15Jones: Avoid uninitialized data warnings in PtAssignmentEngine2017 l1

• #29517 from @jeongeun: Update eventcontent structure for RecoBTag and RecoBTau reconstruction

• #29516 from @Jingyan95: Turn on New Truth Matching l1 simulation

• #29515 from @bsunanda: Run3-alca165 Update all scripts for IsoTrack calibration alca

• #29514 from @cms-tsg-storm: Fix HLT Integration Tests hlt

• #29513 from @jsalfeld: decrease event size by storing PFCandidates with half precision float hlt

• #29512 from @guitargeek: ElectronNHitSeedProducer modernization hlt reconstruction

• #29511 from @CTPPS: pps geometry (pps.xml) for Run3 geometry

• #29510 from @hqucms: Fix ONNX model file version in the unittest analysis comparison reconstruction

• #29508 from @fwyzard: Add a function to iterate over all modules of the given type(s) hlt

• #29506 from @andrius-k: DQM Checking if ME exists after getting it in harvesting dqm

• #29505 from @radla118: New PCC producer for collecting PCC/lumiblock alca reconstruction

• #29503 from @kpedro88: Handle retries in SONIC heterogeneous

• #29498 from @bsunanda: Run3-TB56 Update all the cfg files of HGCal TB simulation upgrade

• #29497 from @slomeo: Created a new Phase2 Scenario (2026D55 ) with an updated Phase2 Muon Geometry (M5) geometry operations pdmv upgrade

• #29495 from @mmusich: re-add also SiPixelPhase1RecHitsAnalyzer to DQM offline for HI scenario dqm

• #29494 from @srimanob: Modify DQMHarvestUnit to multiRun when RD MC runs pdmv upgrade

• #29493 from @andrius-k: DQM BeamPixel Online client ME double reset fix dqm

• #29492 from @Dr15Jones: Decrease begin Run startup time for HLT core daq reconstruction

• #29489 from @fwyzard: Add link to cub::CachingDeviceAllocator documentation heterogeneous

• #29487 from @bsunanda: Run3-hcx254 Add test to compare cell parameters for HCAL geometry by DDD vs DD4Hep geometry

• #29486 from @mrodozov: [Protobuf update] Bump to 3.11.3 dqm

• #29485 from @guitargeek: Clean BuildFiles after Reco in alphabet alca analysis core dqm geometry l1 reconstruction simulation upgrade

• #29484 from @andrius-k: Fixed BUS error due to uninitialized MEs dqm

• #29483 from @bsunanda: Phase2-hgx236 Remove the ERROR message from the algos geometry upgrade

• #29482 from @bsunanda: Phase2-hgx235 Rearrange the files to enable both DDD and DD4Hep to work geometry upgrade

• #29481 from @mmusich: SiPixel Payload Inspector: Gain Calibration db

• #29480 from @suchandradutta: Inclusion of Signal Shape Simulation for the Phase2 Tracker simulation upgrade

• #29470 from @jeongeun: Update RecoParticleFlow eventcontent format and remove drop reconstruction

• #29468 from @bsunanda: Run3-alca163 Modify the code for IsoTrack analysis to get it adapted for 2017 data alca

• #29463 from @bsunanda: Phase2-gem35 First step to move ME0 to GE0 geometry upgrade

• #29458 from @cvuosalo: Small fixes to special DB payload scripts db dqm geometry

• #29456 from @dildick: Run-3 ALCT and LCT data formats l1 reconstruction simulation

• #29454 from @kpedro88: Speed up filesFromList and filesFromDASQuery in ConfigBuilder.py operations

• #29452 from @nurfikri89: Add DeepJet scores for gluon and light quark tagging in JME Custom-NanoAODs analysis xpog

• #29445 from @Dr15Jones: Run GeneratorFilter modules in an external process controlled by cmsRun core generators

• #29443 from @luigicalligaris: Add possibility to specify GBT Id only to DTC cabling map producer alca upgrade

• #29441 from @ghugo83: Phase1 Tracker: Added rails, Shrinked outermost shield, Added TBPX inter-flanges support tubs geometry upgrade

• #29436 from @wpcarvalho: Add a persistent class for PPS geometry as well as a database geometry builder alca db geometry

• #29435 from @makortel: Fix SwitchProducer for products from earlier processes core

• #29421 from @cms-sw: Running code-format for generators generators

• #29420 from @cms-sw: Running code-format for alca-db alca db

• #29419 from @cms-sw: Running code-format for db db

• #29411 from @bsunanda: Run3 hcx252 Add provision of having dd4hep in saving geometry to DB db

• #29410 from @guitargeek: Don't include forward headers in cc files in RecoParticleFlow/PFProducer package reconstruction

• #29399 from @OzAmram: vavilov parameters kappa fix db reconstruction

• #29389 from @sscruz: Update of the lostTrack collection for MUO analysis reconstruction

• #29385 from @ahinzmann: Fix MET Significance, Covariance Matrix and unclustered energy lepton subtraction analysis reconstruction

• #29372 from @andrius-k: DQM: Added unit test support for most online DQM clients dqm

• #29333 from @dkotlins: pixel mc gain calibration scheme: new GTs for MC Run3, modified Clusterizer conditions for Run3 alca reconstruction

• #29304 from @guitargeek: Remove unused SeedFilter class in EgammaElectronAlgos to simplify ElectronSeedProducer pdmv reconstruction

• #29303 from @guitargeek: Removing GEDGsfElectronProducer - No inheriting electron producers anymore alca reconstruction

• #29299 from @jeongeun: Update event content structure in RecoEcal and RecoVertex alca reconstruction

• #29258 from @rchatter: Migration of the EE Reco Geometry to be DD4HEP compliant geometry

• #29254 from @ahinzmann: PUPPI MET in RECO analysis dqm reconstruction

• #29240 from @organtin: Added dictionary classes in EcalCondDB to be used in pyroot for the laser monitoring analysis db

• #29225 from @jeongeun: Update eventcontent structure and remove drop reconstruction

CMSDIST Changes between Tags REL/CMSSW_11_1_0_pre6/slc7_amd64_gcc820 and REL/CMSSW_11_1_0_pre7/slc7_amd64_gcc820:

cms-sw/cmsdist@REL/CMSSW_11_1_0_pre6/slc7_amd64_gcc820...REL/CMSSW_11_1_0_pre7/slc7_amd64_gcc820

• cms-sw/cmsdist#5804 from @belforte: crab-dev to 2005.rc4
• cms-sw/cmsdist#5794 from @belforte: wmcore 1.3.3 for crab client
• cms-sw/cmsdist#5793 from @vkuznet: New version of cmsmon tools
• cms-sw/cmsdist#5790 from @mrodozov: [DD4Hep] Get latest commits from master
• cms-sw/cmsdist#5783 from @cms-sw: [Go] Update sources for other archs
• cms-sw/cmsdist#5780 from @belforte: Crab Client 2004 from pre to prod
• cms-sw/cmsdist#5772 from @cms-sw: Added cmsmon-tools dependency to distribute cmsmon tools
• cms-sw/cmsdist#5771 from @belforte: Update crab-dev
• cms-sw/cmsdist#5765 from @Dominic-Stafford: Upgrade Herwig7 from 7.1.4 to 7.2.0
• cms-sw/cmsdist#5759 from @cms-sw: Updated BuildRules tag to fix cuda compilation
• cms-sw/cmsdist#5756 from @cms-sw: Added common_revision_script helper macro
• cms-sw/cmsdist#5750 from @vkuznet: cms monitoring tools spec
• cms-sw/cmsdist#5749 from @fwyzard: Update upstream repositories for Alpaka and Cupla
• cms-sw/cmsdist#5748 from @cms-sw: [clang] setup correct compiler for clang releases too
• cms-sw/cmsdist#5743 from @cms-sw: [ONNX runtime] Update for powerpc
• cms-sw/cmsdist#5704 from @cms-sw: [GCC 8.4] Update GCC to 8.4.0