github arendst/Tasmota v9.3.0
Tasmota v9.3.0 Kenneth

Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

  • tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
  • tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
  • tasmota-lite.bin = The Lite version without most drivers and sensors.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
  • tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.5-rc6.

  • tasmota32.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
  • tasmota32-BG.bin to tasmota32-TW.bin = The Tasmota version in different languages.
  • tasmota32-lite.bin = The Lite version without most drivers and sensors.
  • tasmota32-knx.bin = The Knx version without some features but adds KNX support.
  • tasmota32-sensors.bin = The Sensors version adds more useful sensors.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support.
  • tasmota32-webcam.bin = The Webcam version adds webcam support.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support.
  • tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware.
  • tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota32/release. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.3.0 Kenneth

Added

  • Command CTRange to specify the visible CT range the bulb is capable of #10311
  • Command L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100> to control Sonoff L1 Music Sync mode sensitivity and speed #10722
  • Command RuleTimer0 to access all RuleTimers at once #10352
  • Command Speed2 to control a once off fade #10741
  • Command VirtualCT to simulate or fine tune CT bulbs with 3,4,5 channels #10311
  • Command SetOption40 0..250 to disable button functionality if activated for over 0.1 second re-introduced
  • Command SetOption43 1..255 to control Rotary step #10407
  • Command SetOption118 1 to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default #10353
  • Command SetOption119 1 to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic #10355
  • Zigbee command SetOption120 1 or ZbEndpointTopic 1 to add the zigbee endpoint as suffix in topic when using SetOption89 1
  • Zigbee command ZbScan to do an energy scan on each radio channel
  • Commands ChannelRemap, MultiPWM, AlexaCTRange, PowerOnFade, PWMCT, WhiteBlend and VirtualCT as synonyms for SetOption37, 68, 82, 91, 92, 105 and 106
  • Commands ZbNameKey, ZbDeviceTopic, ZbNoPrefix, ZbEndpointSuffix, ZbNoAutoBind and ZbNameTopic as synonyms for SetOption83, 89, 100, 101, 110 and 112
  • Commands ZbNoAutoBind, ZbReceivedTopic and ZbOmitDevice as synonyms for SetOption116, 118 and 119
  • Commands BuzzerActive and BuzzerPwm as synonyms for SetOption67 and 111
  • Filesystem commands Ufs, UfsType, UfsSize, UfsFree, UfsDelete, UfsRename and UfsRun
  • Support for filesystem autoexec.bat to execute sequential commands like backlog
  • Milliseconds to console output #10152
  • Gpio Option_a1 enabling PWM2 high impedance if powered off as used by Wyze bulbs #10196
  • Rotary No Pullup GPIO selection Rotary A/B_n #10407
  • BSSID and Signal Strength Indicator to GUI wifi scan result #10253
  • Support for P9813 RGB Led MOSFET controller #10104
  • Support for GPIO option selection
  • Support for FTC532 8-button touch controller by Peter Franck #10222
  • Support for BS814A-2 8-button touch buttons by Peter Franck #10447
  • Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck #10481
  • Support for TOF10120 time of flight sensor by Cyril Pawelko #10190
  • Support for Afrikaans language translations by Christiaan Heerze
  • Support for Frysk language translations by Christiaan Heerze
  • Support for IR inverted leds using #define IR_SEND_INVERTED true #10301
  • Support for disabling 38kHz IR modulation using #define IR_SEND_USE_MODULATION false #10301
  • Support for SPI display driver for ST7789 TFT by Gerhard Mutz #9037
  • Support for TM1637 seven segment display by Ajith Vasudevan #10889
  • Support for time proportioned (#define USE_TIMEPROP) and optional PID (#define USE_PID) relay control #10412
  • Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther #3647
  • Support for SM2135 current selection using GPIO SM2135 DAT index #10634
  • Support for Sugar Valley NeoPool Controller by Norbert Richter #10637
  • Support for Device Groups Device Map #10898
  • Support for Eastron SDM72D-M three phase 100A Modbus energy meter #10862
  • Support for ESP32 Module 3 Odroid Go 16MB binary tasmota32-odroidgo.bin #8630
  • Support for ESP32 Module 5 Wireless Tag Eth01 #9496
  • Support for ESP32 Module 7 M5stack core2 16MB binary tasmota32-core2.bin #10635
  • Support for Berry language on ESP32
  • Support rotary encoder on Shelly Dimmer #10407
  • Support character # to be replaced by space-character in command Publish topic #10258
  • Support trailing silence in buzzer tune #10694
  • Rule trigger string comparisons for EndsWith $>, StartsWith $< and Contains $| #10538
  • SPI display driver SSD1331 Color oled by Jeroen Vermeulen #10376
  • Compile time option USE_MQTT_TLS_DROP_OLD_FINGERPRINT to drop old (less secure) TLS fingerprint
  • ESP8266 Fallback to *.bin.gz binary when OTA upload of *.bin binary fails

Breaking Changed

  • ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
  • Replaced MFRC522 13.56MHz rfid card reader GPIO selection from SPI CS by RC522 CS
  • Replaced NRF24L01 GPIO selection from SPI CS by NRF24 CS and SPI DC by NRF24 DC
  • Replaced ILI9341 GPIO selection from SPI CS by ILI9341 CS and SPI DC by ILI9341 DC
  • Replaced ST7789 GPIO selection from SPI CS by ST7789 CS and SPI DC by ST7789 DC
  • Replaced ILI9488 GPIO selection from SPI CS by ILI9488_CS
  • Replaced EPaper29 GPIO selection from SPI CS by EPaper29 CS
  • Replaced EPaper42 GPIO selection from SPI CS by EPaper42 CS
  • Replaced SSD1351 GPIO selection from SPI CS by SSD1351 CS
  • Replaced RA8876 GPIO selection from SPI CS by RA8876 CS

Changed

  • Remove support for direct migration from versions before v8.1.0 (Doris)
  • IRremoteESP8266 library from v2.7.14 to v2.7.15
  • NeoPixelBus library from v2.6.0 to v2.6.1.4
  • ILI9341 library from Adafruit_ILI9341-1.2.0-Tasmota-1.0 to ILI9341-gemu-1.0
  • Command Sleep 0 removes any sleep from wifi modem except when ESP32 BLE is active
  • Logging from heap to stack freeing 700 bytes RAM
  • Disabled USE_LIGHT light support for ZBBridge saving 17.6kB #10374
  • Force initial default state SetOption57 1 to scan wifi network every 44 minutes for strongest signal #10395
  • PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
  • Domoticz fixed 2 decimals resolution by user selectable TempRes, HumRes and PressRes resolutions
  • Increase number of button GPIOs from 4 to 8
  • ESP32 Increase number of switch GPIOs from 8 to 28
  • ESP32 increase number of relay GPIOs from 8 to 28
  • ESP32 Increase number of interlock groups from 4 to 14

Fixed

  • Redesign syslog and mqttlog using log buffer #10164
  • Shutter stop issue #10170
  • Scripter script_sub_command #10181
  • Scripter JSON variable above 32 chars #10193
  • Shelly Dimmer power on state #10154 #10182
  • Wemo emulation for single devices #10165 #10194
  • ESP32 LoadStoreError when using #define USER_TEMPLATE #9506
  • Compile error when #ifdef USE_IR_RECEIVE is disabled regression from 9.1.0.2
  • Prometheus memory leak #10221
latest releases: v9.4.0, v9.3.1
3 months ago