RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-10.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.7.4.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota32/release-10.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v10.0.0 Norman

Added

Release of Tasmota WebInstaller
Command SetOption2 1 to enable display of global temperature/humidity/pressure info to JSON sensor message
Command SetOption127 1 to force Wi-Fi in no-sleep mode even if Sleep 0 is not enabled
Command SetOption128 0|1 web referer check disabling HTTP API commands if set to 0. Default set to 1 for backward compatibility #12828
Command SetOption129 1 to enable split total energy results #13030
Command SetOption130 1 adding heap size (and ESP32 fragmentation) to logging timestamp for debugging
Command SetSensor1..127 0|1 to globally disable individual sensor driver
Command Subscribe2 ... to subscribe to a MQTT topic without appended "/#" #12858
Command WebGetConfig <url> if #define USE_WEBGETCONFIG is enabled to restore/init configuration from external webserver #13034
Command WebQuery <url> GET|POST|PUT|PATCH [<headers>] <body> to extent HTTP requests #13209
Commands EnergyTotal<phase>, EnergyToday<phase> and EnergyYesterday<phase> to (re)set energy values
Commands EnergyUsage and EnergyExport to (re)set energy usage and export values
Optional IP filter to command TCPStart #12806
Neopool commands NPPHRes, NPCLRes and NPIonRes #12813
Support for second DNS server
Support for influxdb using #define USE_INFLUXDB and several Ifx commands
Support for AM2320 Temperature and Humidity Sensor by Lars Wessels #12485
Support for Technoline WS2300-15 Anemometer #12573
Support for Telaire T6700 Series CO2 sensor by Alexander Savchenko #12618
Support for CAN bus and Freedom Won Battery Management System by Marius Bezuidenhout #12651
Support for IEM3155 Wattmeter #12940
Support for Hydreon RG-15 Solid State Rain sensor #12974
Support for IKEA VINDRIKTNING particle concentration sensor #12976
Support for Sensirion SCD40/SCD41 CO2 sensor #13139
Support for BL0939 energy monitor as used in ESP32 based Sonoff Dual R3 V2 Pow #13195
Support for BL0942 energy monitor #13259
Support for HM330X SeedStudio Grove Particule sensor #13250
Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW #11939
Initial support for Wi-Fi extender #12784
Rule event support as JSON payload #12496
MQTT minimum password length restriction in GUI #12553
ESP32 Berry partition manager #12465
ESP32 Berry class webclient for HTTP/HTTPS requests
ESP32 Berry support for I2S audio mp3 playback
ESP32 Berry support for vararg
ESP32 Berry support for Curve 25519 EC crypto
ESP32 Berry support for ESP32/ESP32S2 DAC gpio
ESP32 Berry support for Serial
ESP32 Berry print stack trace when exception, more detailed with line numbers if #define USE_BERRY_DEBUG
ESP32 support for (Yeelight) Mi Desk Pro using binary tasmota32solo1.bin
ESP32-S2 support for GPIOs
ESP32 add GPIO 6/7/8/11 to template and remove GPIO 28-31 (remapping so backwards compatible)
ESP32 crash recorder Status 12 for ESP32/ESP32-S2/ESP32-C3, supporting Esp-idf 3.3/4.4

Breaking Changed

ESP32 Light and Versatile Graphics Library (LVGL) updated to v8.0.2

Changed

Move firmware binaries to https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
Removed command EnergyReset as it is replaced by new commands
IRremoteESP8266 library from v2.7.18 to v2.7.20
NeoPixelBus library from v2.6.3 to v2.6.7
Message Upload buffer miscompare into Not enough space
Command DisplayDimmer has now range 0..100 instead of 0..15
Speed up initial GUI console refresh
Enable UFILESYS, GUI_TRASH_FILE and GUI_EDIT_FILE for any device compiled with more than 1M flash size
Supported sensor driver range extended from 96 to 128
Relax NTP poll if no ntpserver can be resolved by DNS
Shelly EM template needs to use GPIO ADE7953_IRQ 2
Make Sonoff L1 MusicSync persistent #12008
Simplified configuration for ir-full and removal of tasmota-ircustom #12428
Refactor platformio #12442
Allow buttons to work in AP normal mode #12518
Enable Ping and rule features for any device compiled with more than 1M flash size #12539
Replace spaces by hyphens in final hostname #12710
Default disable CORS for enhanced security and provide user compile option #define USE_CORS #12827
Prometheus: All metrics are prefixed with tasmota_ #12842
Memory metrics have been cleaned up to work consistently between ESP8266 and ESP32
The device name is reported as an info metric
ESP32 core library from v1.0.6 to v1.0.7.4
ESP32 Ethernet Phy Type information to IDF v3+
ESP32 internal sensor driver id moved from 87 to 127
ESP32 disable PSRAM on unsupported hardware
ESP32 remove GPIO initialization to INPUT from not used GPIOs to allow JTAG support
ESP32 M5 Stack Core2 uses UNIVERSAL_DISPLAY with enabled LVGL as default now
ESP32 minimum PWM Frequency lowered to 2Hz #13123
ESP32 shrinked Webcam build, uses now USE_TASMOTA_DISCOVERY #13148
ESP32 Memory display to exclude IRAM (i.e. less by 40-50KB) #13294

Fixed

Sonoff L1 (lite) smoother color transitions
DDS238-2 wrong reactive power value #12283
NO VALID JSON regression from may 4th #12440
Telegram response decoding stopped working after 20210621 and exception on long result message #12451
Neopool compile error on DEBUG_TASMOTA_SENSOR #12464
Scripter and Display MQTT errors due to MQTT_DATA move to String #12525
Scripter moving average and sml input validation #12541
Zigbee Hue angle encoding #12545
Exception 28 when unable to send MQTT message and a topic name without a slash '/' #12555
Wi-Fi initial setup workaround for 11n only routers #12566
Discovery fails when using %hostname% in a topic #12710
Neopool communication error #12813
Shelly Dimmer 2 Energy usage #12815
WDT reset on shutters with stepper motors during deceleration #12849
Negative power values for ADE7953 based devices like Shelly EM #12874
Unable to disable MusicSync mode on Sonoff L1 Lite regression from 9.3.0 #12930
Wiegand support for keypad zero key in single key mode using SetOption124 1 #12960
Hass and Tasmota discovery prefix topic notifications #12972
OpenTherm invalid JSON #13028
MQTT TLS related connection timing errors #13033
Restore functionality as documented when both GPIO_LED1 and GPIO_LED2 are used regression from v8.5.0 #13368
ESP32 core v2.0.0 setting hostname
ESP32-C3 settings layout for configuration backup and restore
ESP32-Solo OTA upgrade
ESP32 Webcam add boundary marker before sending mjpeg image #12376
ESP32 Berry button handlers and error messages #12521
ESP32 do not use chip temperature sensor as global temperature if external temperature sensor is used #12630
ESP32 buzzer in PWM mode exception #12717
ESP32 crash when PSRAM is absent and BOARD_HAS_PSRAM set #13037

arendst/Tasmota v10.0.0 Tasmota v10.0.0 Norman on GitHub