github altmenorg/HAsmartirrigation v2026.11.1-beta1

pre-release42 minutes ago

The first beta of v2026.11.1: a simplification cycle. Seven alphas, shaped by @johnnyh1975's and @Megalos's tests and reviews (#1045), are now feature complete. If you came from v2026.11.0, this is the whole cycle in one page. If your garden depends on Smart Irrigation and you do not want surprises, stay on v2026.11.0 a little longer.

What happens when you update

  • One setting says what Smart Irrigation does: Calculate and water, Calculate only or Stop everything, at the top of Settings. It replaces the full controller switch, direct valve control, "Program on" and the start trigger card.
  • If Smart Irrigation opened your valves, the installation moves to Calculate and water once, on its own, and keeps watering at the same moment: the start trigger becomes a schedule of a program called "Watering". An inactive start trigger comes back as a switched-off schedule. A notice in Settings > Repairs tells you so.
  • If an automation of yours does the watering, you are on Calculate only, and the start event fires as before.
  • There is no main program any more: it becomes an ordinary program, with the same zones, passes, soak, pause and schedules.

Less

  • Fewer settings that say the same thing, every "Enabled" row replaced by a switch next to its title, and the explanations behind a small "i".
  • Two levels of forms. The standard mode keeps the short forms; the advanced mode (Settings › General) shows the rarer options as fields. When a hidden value is set, a box at the top of the program or zone lists it. Only two really technical options are YAML only.
  • Skip watering in one place, and a schedule just says whether it takes the weather into account.
  • "Will it be skipped?" is one line when nothing holds the run back, and Pause, Next step and Stop are on the Home page only.

New

  • A program drawn as a flow, from what starts it to the notification, with the passes, the soaks and the zones that have nothing to water shown faded.
  • The next days at a glance: 3, 7 or 14 days (remembered), one row per day, today's runs included.
  • Chained programs: a schedule can start "after a program", with a delay, even when the first one was held back by the weather.
  • The weather is judged at each start on current readings (frost, wind, rain sensor, postponement); the rain forecast and the days between irrigations stay decided once a day.
  • Programs on supplies of their own water side by side (#1044), and each program has a switch for dashboards and automations (#1043), both by @johnnyh1975.
  • Notifications when a program has watered, or only when something goes wrong.
  • Watching the hardware: a zone set aside after repeated failures, leak detection on a water meter, observed watering (advanced, off by default).
  • YAML for programs and zones, assistants (Home Assistant's MCP server and Assist can read and set up zones, groups and programs, never open a valve, #1042), and a schedule at a bearing of the sun.

Since alpha7

  • "Just before each start" keeps the daily calculation too. Alone, a weekly schedule or a program only started by hand could outlast the week of weather readings the integration keeps, and the water balance stood still between two starts (thanks @Megalos). Nothing changes for "At a fixed time".
  • With Calculate and water, "Just before each start" is the moment to use: once it is chosen, the choice is no longer shown, and any other stored moment stays in sight so it can be changed. The hourly equation switch moves to the advanced mode.
  • The minimum deficit in the box of hidden options uses your number setting ("1,5 mm") and a short label (thanks @johnnyh1975).
  • French texts all say "tu", and card titles keep Home Assistant's spacing on phones (#1056).
  • Lint tooling off a vulnerable minimatch (nothing shipped was affected).

Fixed during the cycle

  • The move to the new model sticks (#1046, @johnnyh1975), and a run begun while Home Assistant starts no longer holds the start up.
  • On a phone: the "i" bubbles fit (#1047), switches stay on their line (#1049), less empty space in "Where it stands" (#1048), Settings › General aligned and tidier (#1050, #1056), Android scrolls to the bottom (#1054).
  • The live bucket entity agrees with Home › Now (#1052), the daily need shows as a positive number (#1055), the chart's days are remembered (#1051).
  • A forecast without a weather service says so in sight (#1053, @johnnyh1975).

Docs and website

The documentation moves to MkDocs Material (search, sidebar, dark mode) with the stable; preview at smart-irrigation.org/docs-preview, review in #1057. The website is smart-irrigation.org.

Tell us

Anything that reads wrong or waters wrong: an issue, or a reply in #1045 🙂

Don't miss a new HAsmartirrigation release

NewReleases is sending notifications on new releases.